AboutDan Merrill Expertise We are a "green" roofing company. We offer information and advice on metal and synthetic cedar, tile, and slate roofing products.
We also address good, sound installation practices for lifetime and slate roof installations.
Generally speaking, we are experienced with any materials that have 50 year or longer, expected lifespan, such as copper, terne coated steels, Kynar painted Steel, Aluminum, etc.
We do extensive Infrared scans of homes with water leaks, moisture damage, air leakage, etc. So we have a good practical knowledge of what works and what does not work in the long term.
We offer no advice on asphalt or fiberglass roofing products.
Experience Was a hobbyist/home remodeler for over 30 years. Restored over 30 homes.
After retiring from engineering (27 years), I studied materials and installation practices of high-end roofing materials. This information was tempered by my engineering experience.
We have developed and sell roofing "kits" to roofing contractors who do not have the time to research rarely used roofing products. We ensure that they have all the required materials, tools and information to offer their customers a solid 50 year installation.
Organizations National Association of Home Builders
Fox Valley Builders Assoc.
Illinois Association of Home Builders
Remodelers Council of NAHB
Metal Roofing Alliance
EnergyStar provider
U.S. Green Builder Council
Better Business Bureau
Publications Our websites www.ecowiseinc.com and www.chicagometalroofing.com,
Fox Tails, publication of the Fox Valley Builders Association
Education/Credentials Tech certificate in Mechanical Drafting, 1978.
Self-taught Engineer.
Many certificates held.
Have achieved NAHB "Certified Graduate Remodeler" designation.
Graduate of Green Builder College.
Licensed, insured & Bonded Roofer in Illinois.
Awards and Honors Holder of many Patents,
Member of Mensa
Question I have a mountain cabin with a steep metal roof. I want to install a wood burning stove with a 6" exaust pipe that runs straight up through the roof. Do you have a kit or assembly that will allow me todo this?? If not can you direct me to a source who can help me?
Thanks,
Dick
Answer That question is best asked of the stove manufacturer. The type of exhaust pipe depends a lot of how hot the flue gasses are, exhaust flow, BTUs of the stove, etc. The stove manufacturers usually offer kits for many types of roofs.
For your metal roof the only consideration is in matching the boot material to the roof. The boot is the part that attaches to the roof and seals to the flue pipe. For example: if you have a steel roof you would not want an Aluminum boot because the steel would corrode the Aluminum in a short time.
