| |
You are here: Experts > Parenting/Family > Protecting your Home and Family > Security & Fire Protection Systems > chirping alarm
Expert: Dave Neuweiler - 11/3/2009
Question
Hi, i have a DSCPC1555 alarm. it has been chirping every 10 seconds for 3 days and I am going mad from sleep deprivation. *2 brings up troublecodes "zone 1" bright and "zone 2" dull. suspect its a battery problem. no idea who installed. is it possible to turn the whole thing OFF just to get one nights sleep before finding a technician to come tomorrow at great expense? i can't work out how to open the front panel to remove battery or disconnect wire. HELP! thanks.
Answer
Hello Andrea, and thanks for writing.
To disable the alarm, you have to disconnect both the AC power and the backup battery (which is failing anyway). This is done at the control panel, not at the keypad. The control is usually tucked away in a closet. When you find it, open it up. You'll see the battery in the bottom. You'll also see a circuit board with a row of terminal connections at the bottom.
Disconnect the first wire from the left; tape it with electrical tape so it does not short out. It's 16 volts, so no need to worry about shocks. Next, disconnect either the red or black wire from the battery. That's it.
When you get a replacement battery, just plug it in (red is positive and black is negative), and reconnect the wire to terminal one (first from the left).
Best Regards,
Dave
Add to this Answer Ask a Question
|
|
