	AllExperts > Experts
	Search

About Terry
(Top Expert on this page)

Expertise
I Answer Sewing Machine Repair Guidence & Tip Questions Only. I DO NOT ANSWER "Value", or "How To Alter", or "Sewing" Related Questions...period. I can help on Singer`s 700, 600 series Touch & Sew`s, 400 & 500 Slant-O-Matic`s, and most older model Singers. Feather Weight`s (221 series), 15-91, 201 etc. I worked for Singer for 10 years, had my own repair business for another 10 years. Other makes entertained, but would rather stick to Singers of the older vintage. If you machine is newer than 1992, please do not ask me, as I am not up to speed on machines after that era. You might try the web site I have, to see if I do offer any advice there, but the focus in on those listed above. Feel free to visit my site: http://www.tandtrepair.com Kind Regards - Terry

Experience

Past/Present clients
Performed a lot of work for major dealers in the Fresno, CA. area.

You are here: Experts > Home/Garden > Arts and Crafts > Sewing

Questions Answered By Expert Terry
In Category Sewing

Subject	Date Asked

1970's White(?) portable - shuttle race	9/2/2008
Q: I cannot get machine to pick up bobbin thread in the shuttle race. Cannot see any damage, but dont ... A: Could be a broken hook drive gear. Not knowing if the bobbin loads from the front or side...hard to ...
Bobbin Thread	8/31/2008
Q: I have a Singer Model 756. When I sew the front thread produces nice even stitches the bobbin ... A: Normally looping underneath is a top tension related item. Try the general tips page I have at: ...
Singer Futura 900 Sewing Machine	8/30/2008
Q: My Futura 900 is (I think) around 1965. The little clip that holds down the bobbin when you need to ... A: Sounds like the bobbin winder lever, found on this page of my site: ...
bobbin on model 648	8/29/2008
Q: I have a Singer touch & Sew model 648. I can't seem to wind the bobbin. I've followed all the ... A: Do things spin around counter clockwise in the bobbin area... Perhaps it has a broken gear now...but ...
vintage singer/ #k75745	8/28/2008
Q: can't get the needle and the bobber thread to form a locking stich,after running the fabric through ... A: Bill, Need model number...fast... Normally on older machines, and depending on "model" number, and ...
touch and sew 756	8/27/2008
Q: I have had this machine for 25 years and just got it tuned up....I used it the other day and it ... A: I would double check threading of the top tension. It can be a source of problems, due to interior ...
upholstery machine will not pick up the stitches	8/24/2008
Q: Just wanted to let you know the update on my machine. I finally realized I HAD THE NEEDLE IN WRONG. ... A: Sometimes suggesting the needle is in backwards doesn't always come out just right, and not sure why ...
Singer 534 Stylist	8/23/2008
Q: The feed dogs on my stylist do not move the material. They are above the throat plate but they do ... A: Glad to have help. Only thing that really remains...is the feed system still now in time with the ...
Singer 534 Stylist	8/22/2008
Q: The feed dogs on my stylist do not move the material. They are above the throat plate but they do ... A: Do the gears move when you turn the machine by hand? Perhaps a gear has merely lost grip with the ...
Locked up	8/21/2008
Q: I was sewing and the bobbin seemed to bunch up and the machine locked up. It is in the up position ... A: Need to open the slide plate, lift the position bracket up and push to the right. Should be able to ...
Old SInger	8/20/2008
Q: I have been given an old metal 329K SInger (electric). I am sure it is better quality than its ... A: The old 329 isn't a bad unit at all. All metal, and should just sew about anything within reason :) ...
Singer Fashion Mate model 237	8/19/2008
Q: My wife is experiencing problems with stitch bunching up on underside of material at start up. Sems ... A: The 237 is a rock solid unit, you have a good work horse machine. It does have its minor problems ...
Locked up	8/19/2008
Q: I was sewing and the bobbin seemed to bunch up and the machine locked up. It is in the up position ... A: Not knowing the model number, or make (guessing Singer), makes it hard to provide an answer. ...
Singer Treadle Fiddle base	8/18/2008
Q: I have what I understand is a "fiddle base" Singer treadle machine. I would love to know how to ... A: Those are well way before my time :) Your best bet is to visit some of the Yahoo Sewing groups: ...
Singer 401 A	8/18/2008
Q: I have a Singer 401 A and the stitch patterns across the bottom of the flip up lid will not stitch ... A: Sounds as if the pattern dials are not properly lined up to the cam, per the letter asignment on the ...
singer 1060 only feeds in reverse	8/16/2008
Q: No matter what setting or stitch,all I have is reverse.I can move the bar manually and it will run ... A: Right off the start...sounds like an electronic problem, or the reverse button is continuing to hold ...
Singer Futura II Model 920 Parts	8/14/2008
Q: Terry,My sister has a Singer Futura II Model 920 sewing machine that has a broken "Console Cover" ... A: I am not aware of anyone suppling top lid covers right now. You best bet is to watch Ebay...or ...
625 singer zig zag	8/14/2008
Q: 625 singer..no manual..need to know how to set the zig zag.. thank you donna A: Set the zigzag for what...full width, for zigzag period... Not sure I understand what is being fully ...
singer 221	8/13/2008
Q: the belt on my machine is coming apart..how hard it it to replace it? I just cant afford to take it ... A: There is one screw that holds the motor in place, loosen it, slide off the old belt, slip on the new ...
Bobbin Winder on Singer Touch and Sew 600	8/12/2008
Q: I read you answer to a previous sewer about winding the bobbin on a Singer Touch and Sew 600, and I ... A: Tamara, The 600's came with two different winders, which is explained on the 600 page. Perhaps you ...
replacement 500A foot pedal	8/11/2008
Q: My trusty Singer 500A foot pedal makes funny popping noises and gets really hot - I "think" from ... A: A foot pedal of that vintage to just now wear out...pretty darn good life span... :) It can be ...
Singer T&S 756 bobbin winding button and bobbin case	8/10/2008
Q: I have a Singer T&S 756 that was given to me. I don't know when it was last used before I got it, ... A: Sounds like the bobbin winder unit is gummed up, and not moving freely as it should. This happens ...
singer stylist 413 bobbin won"t spin	8/9/2008
Q: I purchased a machine from second hand store, run quiet, bobbin will thread, but the bobbin case ... A: I do not have any shops listed for MI right now, but your problem sounds like a broken top vertical ...
zipper foot on Golden T&S	7/31/2008
Q: I'm using my mother's Golden Touch-n-Sew (I think it's a 620...), and I haven't used the zipper ... A: Attached, a picture of 161166 from the front type of view. Notice the difference in the shank angle. ...
zipper foot on Golden T&S	7/31/2008
Q: I'm using my mother's Golden Touch-n-Sew (I think it's a 620...), and I haven't used the zipper ... A: The adjustable zipper feet are a little more difficult to figure between slant -vs- vertical. Is ...
zipper foot on Golden T&S	7/30/2008
Q: I'm using my mother's Golden Touch-n-Sew (I think it's a 620...), and I haven't used the zipper ... A: Gee...am not sure if you mixed them up or not :) The possible is the other machine is a vertical ...
Singer timing problem?	7/29/2008
Q: I visited your website and did not see model 132Q listed, but hopefully you may be able to give me ... A: Visit the other links I provided, and there is information on timing shuttle hook machines. It may ...
Threading or loading a bobbin	7/29/2008
Q: I have a Model 750 and no manual. How do I load the bobbin? Also, how do I stitch in reverse ? ... A: Have a visit to my 700 T&S page at: http://www.tandtrepair.com/700_TanS_Items.html It has bobbin ...
Oiling my Singer	7/28/2008
Q: I have a Singer 774, it's been good to me for many years, I have been lax in the oiling department ... A: Remove the top, bottom, and side cover. Apply a tiny drop to any area that metal moves against ...
Singer 201-2	7/28/2008
Q: I have a 1941 Singer 201-2 with a zip zag foot. Can I do a button and blind hem with it??? I saw ... A: Haven't seen that many attachments over my years for the 201, but have had some exposure to them. I ...
needle	7/27/2008
Q: is there a special size needle for singer model 648, I keep breaking needles Do you have a ... A: On this page of my web site for the 600 T&S, you should find the answers, and downloadable guides in ...
Stylist 533 "spring arm"	7/16/2008
Q: I have a Singer Stylist 533 + manual and I can't get the thread to stay on the spring arm (small ... A: I have to guess that the spring arm you refer to is the check spring. Why it pops loose can indicate ...
bobbin tension	7/15/2008
Q: top stitch looks fine but bottom stitch is loose. How can I adjust the tension on a Singer Touch ... A: Not knowing which T&S you have, a 600 or 700 series... I first suggest visiting this page of my ...
Singer Model 132Q	7/14/2008
Q: I was hoping to get an answer to my original question, but reading thru some other answer, I have ... A: My apologies for a late response to the first question, have been a little under the weather so to ...
503A upper tension	7/13/2008
Q: I went to your site and followed your tips & the threading diagram. I changed the needle and the ... A: Sounds like the tension stud...little arm that holds the tension dials...might need to be spread ...
singer 600e t&s	7/11/2008
Q: I'm not sure what the part is called that broke. I call it the hand wheel? It still sews, but I ... A: I personally cannot help with a hand wheel, but perhaps this contact might. His web site is: ...
Singer timing problem?	7/10/2008
Q: I visited your website and did not see model 132Q listed, but hopefully you may be able to give me ... A: Attached is a extract from the hook section of the 132Q. I have no manuals available for this model. ...
Singer Genie	7/10/2008
Q: I just got this machine & loved it, it was working fine, then just stopped picking up the bobbin ... A: When you remove the bobbin, and bobbin case (if possible), and turn the hand wheel by hand...does ...
Touch Tronic 2000	7/9/2008
Q: Terry, I am very new at sewing and so far am loving it...I wish I had started years ago. I bought ... A: Could be part related, or adjustment related. When you wind the bobbin, you do engage the lever ...
slantomatic 503a	7/6/2008
Q: I just inherited a singer 503a. The bobbin winding wheel seems to have deteriorated. Everything else ... A: I think everything you might be looking for is available on my site for the Slant-O-Matic series, ...
stitching with mod #774	7/3/2008
Q: WHEN I SEW A STRAIGHT SEAM, THE TOP STITCH IS FINE, BUT THE BOTTOM IS NOT STITCHING PROPERLY. IT ... A: Sounds like either a top tension problem, or damaged bobbin case. Best bet is to have a look at my ...
singer600E	7/1/2008
Q: after winding the bobbin the holder became dislodged and I can't get it put back. I get it in but it ... A: Try some of the tips provided in the free area on my 600 pages of the web site. Pretty sure you'll ...
Singer Golden Touch & Sew Model 620	7/1/2008
Q: I am having trouble with the bobbin. I cannot get the top needle to pick up the bobbin thread so I ... A: Sounds like a broken gear, or hopefully just a timing issue. I always do like to ask though, the ...
Bobbin thread is getting stuck and not sewing right	6/30/2008
Q: I recently bought a Singer 640 at a garage sale and I have no idea how to operate it. It was doing ... A: Visit my web page on the 600 series at: http://www.tandtrepair.com/600TandSstuff.html Think it will ...
sewing maachine needles	6/30/2008
Q: What is the difference between organ and schmetz sewing machine needles? Are they interchangeable? A: Marge, Just in my opinion...Schmetz is a more precise needle, and maintains a true shape during the ...
needle of Singer 401 doesn't move	6/29/2008
Q: I got a 401 from my deceased mother-in-law. The handwheel and the foot pedal is running but the ... A: Hanh, You have to ensure the clutch wheel knob is engaged, and not loose. Might visit my page on the ...
tension singer 15	6/28/2008
Q: MY singer 15 has been having upper thread tensioning problems it will all of a sudden seem to ... A: Susan, The best thing to ensure is that both bottom and top tension area's are free of any debris, ...
Singer 500 electric cord problems	6/28/2008
Q: I just managed to acquire an Singer 500 which I adore in every way. However, in a colossal stroke ... A: You can obtain new power cords, without the need of a new foot control. Ray Revette would be my ...
Singer 600e	6/26/2008
Q: Is the Singer 600e as good a machine(all things being equal) as a Singer 401 or 500? Thanks, April A: The 600E is all metal gears, just like the 401 & 500. Main difference, the bobbin winder. The 600E ...
Singer Futura Bobbin Winding	6/26/2008
Q: I just purchased this sewing machine, and have been having a great time with it. However, the other ... A: Is this the Futura CE, and an older Futura 900/920 model? If you have a CE...am so sorry, I know ...
top thread jams in bobbin case	6/25/2008
Q: I have a Singer Stylist 534. After a few stitches (maybe 10 - all of good tension and laying ... A: Check these two pages of my web site. http://www.tandtrepair.com/StylistLine.html and: ...
Putting machine in desk cabinet	6/25/2008
Q: We have an old Singer Touch and Sew II machine and its original desk type wooden cabinet. After a ... A: I take it this is a Free Arm Touch & Sew... There is a draw bolt...sort of L shaped. It fits into a ...
T & S 646 troubles....	6/23/2008
Q: So, I purchase the 646 on Ebay and received it last Friday. I decided to use it all weekend before ... A: First check the threading of the top tension. I have a new tips page, perhaps you have already ...
Singer Model 306W timing belt	6/22/2008
Q: I am in desperate need for a timing belt for this machine. I bought the machine online and was not ... A: I don't carry the belt myself. It is a cloth belt, with metal cleats on it. Plus one has to tear the ...
Race does'nt turn	6/21/2008
Q: Singer stylist#413 makes noise & will not pick up thread when starting from bobbin & turning ... A: Sounds like a broken top vertical gear, or timing belt, but my guess would be the top gear. Item ...
buttonholer for slant-o-matic 403a	6/19/2008
Q: I have a slant o matic 403a that was handed down to me from my grandmother and I am interested in ... A: Any Slant Needle Buttonholer will fit and work. Only thing to watch for is the feed cover plate. Any ...
light socket Featherweight 221	6/19/2008
Q: I have a replacement light socket for a broken one on this old machine but do not know how to ... A: Best I can offer is: when removing the old socket...remove the socket from the shield first, ...
Singer 632 Slide Plate	6/18/2008
Q: I lost the screw from the slide plate and so the clip fell loose. I have no idea how it goes back ... A: Am not familiar with a 632 model. Best suggestion is to visit my 600 series T&S page at: ...
singer 99k	6/14/2008
Q: I recently acquired a Singer 99k in its case with various attachments. I see from the internet that ... A: Brian, How did you re-assemble the hand wheel parts? It is the hand wheel, clutch disc, then the ...
Singer model 648 - about its parts	6/14/2008
Q: i own a singer 600E and i recently bought a model 648. they are very similar, and after oiling and ... A: The 600E was a top of the line machine, where the 648 was a little lower model of the line... The ...
Singer 500a	6/13/2008
Q: I've recently acquired a Singer 500a. It didn't come with a buttonholer attachment. What should I ... A: On the cams, I don't recall what they came with, but the owners manual should cover that ...
my Singer isn't quite singing	6/13/2008
Q: I was using my sewing machine when it suddenly slowed down to the pace of a snail. I opened it up ... A: Well...hard to say...no model mentioned. Generally...your problem sounds like a simple lack of ...
upper thread keeps coming out of needle	6/12/2008
Q: I have a brother XL2600 sewing machine. The upper thread keeps pulling out of the needle whenever ... A: Am not up to speed on the XL2600 right off, but I'd double check my threading. When the presser ...
Bobbin casing	6/11/2008
Q: I need a complete bobbin casing for a AH-335288 sewing machine. I just had it tuned up in San ... A: Per the instruction book, and on page 8, it shoes A & A2. A - being the bobbin case, and A2 being ...
Janome RX 18S - Problem With the Feed Dogs	6/11/2008
Q: I know you are not a new model expert, but you might have some ideas on this one. When I opened it ... A: I honestly know nothing about the machine you own. Rather than rejecting the question, have choosen ...
Singer Stylist 534	6/10/2008
Q: I am an experienced sewer. I have a singer stylist 534 and the fabric will not move when I sew. I ... A: Well...if the feed dogs are not moving, I have to suggest a broken feed gear. It is fairly common ...
Singer 403	6/9/2008
Q: My Singer 403 tension knob turns but doesn't make the disks move. also, unrelated? having trouble ... A: Tension knob not moving what discs...the tension discs? Not sure I understand the question. As for ...
Singer 638	6/8/2008
Q: I just threaded some heavier outdoor thread to resew a light canvas/plastic seam binder (edge of ... A: Honestly...sounds like you may be pushing the machine a little beyond its limits :) But to answer ...
special feet for touchtronic 2000	6/7/2008
Q: I'm starting to sew again after several years and saw that there are additional foot attachments ... A: Yes, the slant needle equipment will fit the 2000. Any attachment for the 600, or 700 series T&S ...
Singer Athena 2000	6/6/2008
Q: Does the machine need to be oiled? If so,how do I get to the inside? It is starting to make a noise ... A: I have a panel removal guide available for free on this page of my web site: ...
Dropped stitches on a Singer Golden Touch & Sew	6/5/2008
Q: I recently received as a gift an old Singer Golden Touch & Sew (1971 vintage). While it's been ... A: Sort of sounds like the machine may be a little out of time. It is best to use a Singer 2045 Yellow ...
Slant=O=Matic singer 403 special	6/5/2008
Q: I don't see a belt anywhere, but I would swear that it is slipping. The needle(new one)will not ... A: Sounds like a hand wheel/clutch disc problem right off. The little clutch disc can go in several ...
Touch and Sew models	6/4/2008
Q: In the Touch and Sew Singer models, what is the order of top of the line numbers to the basic model? ... A: Actually the list is long, and there those of the 600 & 700 series to rally through, spanning a ...
Singer Fashion mate 237	6/2/2008
Q: I think it may need oiling but have no idea where to oil it. It could also do with a bit of a clean ... A: A drop of oil where ever metal is moving against metal. General cleaning, I use either 409, or other ...
Bobbin casing	6/2/2008
Q: I need a complete bobbin casing for a AH-335288 sewing machine. I just had it tuned up in San ... A: I do not stock them, but you can get a rough idea on cost from this site: ...
Singer Genie 353	6/1/2008
Q: I have a singer genie 353. The best I can figure out is my needle got bent, starting hitting the ... A: Sounds like either a broken belt, to top vertical gear. That or the belt has fallen off... If you ...
Singer model 15	5/26/2008
Q: I need to replace wiring in this machine . The Motor wires were damaged and seem to not be insulated ... A: Attached is a picture of a standard Singer 3 wire block. Just ensure if rewiring the motor, use some ...
Pink Kenmore ?#48	5/26/2008
Q: Do you know anything about Kenmore sewing machines? I have a pink Kenmore model ?48. It says the # ... A: Honestly, you best place to find that info might be some of the Yahoo sewing groups for Kenmore ...
Brother XL-5600 bobbin issues	5/24/2008
Q: I recently resurrected a fairly new, used-once-and-put-away Brother model XL-5600 home sewing ... A: I do mainly mess with Singers, but as far as I know...am still an Authorized Brother Repair Center. ...
Singer Athena 2000	5/21/2008
Q: Received a used Athena 2000...so excited! However, it will run a seam for an inch or so and then ... A: Trouble shooting an Electronic is tough. When you say, the motor continues, and the fabric is ...
machine squeaks and is slow	5/20/2008
Q: as i said above my singer model#1120 makes a squeaky noise when running and it seems slow,any ideas ... A: My first guess, it might need a couple drops of oil where metal moves against metal. Other than ...
Singer 401	5/16/2008
Q: Can you tell me what settings I use to use the cams -- I got it in and set at "special" but it does ... A: No pun intended, but the setting on the dials is B&S. Refer to my Slant-O-Matic page at: ...
Singer 401A stitch selector	5/14/2008
Q: I have a Singer 401A that is in good condition and sews well except...it will only do a straight ... A: Sounds like the needle bar area is gummed up. Have a look at my web page for the Slant-O-Matics, the ...
Model 756 Touch & Sew	5/14/2008
Q: The feed dogs on my machine have worn down and have a hard time pushing the fabric through. Can I ... A: The feed dogs are avaiable at most repair shops, and I carry them as well on my web page for Singer ...
Removing broken hook drive gear from singer 513	5/13/2008
Q: Terry, We have a Singer Stylist 513 with a broken Hook Drive Gear (#103361). The plastic bevel gear ... A: If the two setscrews are removed, and it doesn't slip right off...sounds like it may be gummed up, ...
How to lubricate the motor of Singer 191J	5/13/2008
Q: I've recently acquired my grandmother's Singer 191J, which she has had since 1956. The instruction ... A: The only models that I know of with the grease cups are the 201 & 15-91 series. On oil...I use ...
Singer 237 froze up.	5/12/2008
Q: My Singer 237 was working fine one day and when I started to sew the next day, it was froze up. I ... A: I'd remove the bobbin case, open the shuttle cover, remove the hook, then see if it will turn. ...
wont grad thread	5/11/2008
Q: i have an old white treadle . i also have a singer around the same year. the singer is great but i ... A: Not know which older (model) White you have, cannot offer much help. Doubt you can swap the ...
403A Slint needle Machine Singer	5/10/2008
Q: I have a 403A Slant Needle Singer Sewing Machine.Serial Number NA949768. It was my grandmothers. ... A: Attachments are pretty much available, usually via Ebay. The machine should have a model number on ...
Singer 600 Hand Wheel	5/10/2008
Q: I recently purchased a sewing desk that came with a Singer 600 sewing machine with the knee control. ... A: You need to remove the bobbin case from the machine, then see if it will spin/turn. No oil by the ...
Feed dog gears replacement	5/9/2008
Q: I have a singer 534 stylist. The feed dog gears broke. I am attempting to remove old gears. It seems ... A: You need to remove the motor plug housing to allow the shaft to slip all the way out. Need to ...
Singer 221 Featherweight hand wheel doesnt move	5/8/2008
Q: I just bought a Singer 221 Featherweight sewing machine and the take up lever as well as the hand ... A: Honestly sounds like you still may have a thread jam. When one removes the needle plate, the bobbin ...
Grooves in tension disk	5/8/2008
Q: I've just bought a new industrial post sewing machine that cannot is not sew a constitent lockstich. ... A: I don't repair many commerical machines, but all the tension discs I have ever seen are smooth. I ...
Singer 401a sewing machine	5/6/2008
Q: I took the tension assembly apart to clean because the thread would jam up. Now i forgot exactly ... A: Attached is a picture of the exploded view from the factory service manual. I have other items, ...
Singer 700 Walking foot	5/5/2008
Q: I would like to buy a walking foot for my Singer 700. Do I have to buy a special throat plate for ... A: Most of the top of the line 700's came with the foot. No special plate is required, and normally one ...
Singer 600 Hand Wheel	5/4/2008
Q: I recently purchased a sewing desk that came with a Singer 600 sewing machine with the knee control. ... A: If you are unable to turn the machine by hand, it could be as simple as a thread lock/jam in the ...
Singer 221 Featherweight hand wheel doesnt move	5/4/2008
Q: I just bought a Singer 221 Featherweight sewing machine and the take up lever as well as the hand ... A: Sounds like a thread lock/jam. Usually a very tiny piece of thread will get caught in the hook ...
Bobbin winder on Singer 500a	5/2/2008
Q: I just unscrewed the bobbin winder mechanism in my Singer 500a to replace a disintegrated winder ... A: This is tought to explain without a photo. So I have converted a PDF to a JPG file, and hope it ...
Singer quantum 9900	5/1/2008
Q: I reeived this machinge without a manual. How do I wind a bobbin? It doesn't have the usual ... A: Just visited Singers schematic site, and am not see a "9900" model. I have schematics for 9910, 9920 ...
Singer 237	5/1/2008
Q: I rescued a Singer 237 from a thrift store. It is in great shape. I was cleaning it, and had taken ... A: Had me there for a second, then it dawned on me...237. Had 257 in mind :) What you need to do...is ...
403 special slant-o-matic	4/30/2008
Q: my mothers machine she is trying to find rubber o ring for bobbin winder she says hers has stretched ... A: If I understand the question correctly, you are looking for the bobbin winder tire/o-ring... Those ...
singer fasion mate 237 bobbin	4/29/2008
Q: I am trying to insert the bobbin to thread it with the needle, but it doesn't seem to be working. ... A: The 237 winds the bobbin on the top lid of the machine. The thread should only pass from the spool, ...
Singer Machine 6105	4/28/2008
Q: My Singer 6105 has a few problems. It does not release the thread when the presser foot is in the up ... A: What a real bummer, I like the 6105, but finding parts is a little difficult. If you have a Singer ...
Singer 603	4/25/2008
Q: My machine has been cleaned, oiled and serviced, but still insists on pulling up 5 or six bobbin ... A: Bird nesting is usually the top tension, 90% of the time. Not to say something else couldn't be the ...
401A versus 500A	4/25/2008
Q: Terry..could you tell me why the 401A is going selling like gangbusters on ebay and the 500 is not ... A: Honestly couldn't say. They are essentially the same machine, minus frame design. My only suggestion ...
Touch & Sew 750 is not in sync	4/23/2008
Q: Terry, I have a T&S 750 gold deluxe. The bobbin isn't working properly. The needle is hitting ... A: This sounds like broken gears underneath to me. I'd remove the bottom pan, and have a look at the ...
Singer 500A Stitch Pattern Selector	4/23/2008
Q: I have a Singer 500a and can't seem to be able to move the stitch pattern selector. It seems to be ... A: Sounds like they may be gummed up with old oils. I first try oiling them with a solvent, like Liquid ...
singer 6136	4/21/2008
Q: The tension on my machine keeps bunching up the thread on the underside of the stitch. We have ... A: Perhaps the bobbin case tension spring area is full of lint. It happens over time, and the bobbin ...
walking foot problems	4/20/2008
Q: I have a Singer Touch & Sew 775. I am using a walking foot.. I am making a quilt. It was working ... A: Being I don't sew...sort of a guess on my part with your query. My first inspection would be the ...
Kenmore model 158	4/20/2008
Q: The needle goes down into the bobbin hole and does not come back up with the pedal or by hand. Can ... A: Not knowing the rest of the model number, hard to say. The 158 is a series, and is followed by ...
Singer 201	4/19/2008
Q: Terry, I have a singer 201 and the knob that adjusts the thread tension falls off when you adjust ... A: My first guess is that the tension stud bar could use a little tweaking. Over time, or for whatever ...
Singer 248	4/19/2008
Q: I am looking to buy a 2nd hand sewing machine and came across an ad for a "Singer 248". Do you know ... A: No, plastic gears, in my opinion only, are ok. Course, not like the older Singers with metal gears, ...
Futura II 920 Tight Stitching Problem	4/18/2008
Q: I have an old Singer Futura II Model 920. It's the one that Singer made during their transitional ... A: I don't recall any 920 with the adjustable feed, but doesn't mean they didn't come with them. ...
Singer 248	4/18/2008
Q: I am looking to buy a 2nd hand sewing machine and came across an ad for a "Singer 248". Do you know ... A: The 248 is a Fashion Mate, if I recall correctly. Made around 1980 - 1981, sold for around $180. ...
Singer model 1120 acting up	4/17/2008
Q: I have some dresses I am needing to complete for a wedding in 3 weeks and my machine it acting up on ... A: I have never worked with this model, so not real clear on possible functions of the machine. ...
zipper foot	4/16/2008
Q: I have a Singer Touch n Sew 758 and I am looking for a zipper foot, preferably one that can handle ... A: I have zipper feet for the 758 on this page of my site: http://www.tandtrepair.com/Presser_Feet.html ...
singer t&s zig zag series 648	4/11/2008
Q: i just purchased this in a yard sale for $15 and its in great shape, i am wondering if you can tell ... A: You should find the info requested on my web page for the 600 series T&S machines. ...
timing	4/10/2008
Q: I jammed the needle on my Singer sewing machine last week, now it is making a clunking noise as the ... A: Honestly sounds like a broken gear at the moment. I could be wrong, and that is just a guess. Being ...
Singer Athena 2000 machine.	4/9/2008
Q: I had an Athena 2000 machine and literally used it to death. I am looking at buying a used one on ... A: That is sort of a question I really cannot answer. Anything on Ebay is "buyer beware", as you may ...
SINGER	4/9/2008
Q: I WAS GIVEN THIS SEWING MACHINE WITHOUT MANUAL. I NEED TO KNOW HOW TO WIND THE BOBBIN. I CAN LIFT UP ... A: As I said, the bobbin winds on top of the machine, per your question, for a 237. Now, perhaps your ...
Singer 404	4/8/2008
Q: I have a Singer 404 sewing machine that was working great, but now the needle thread and bobbin ... A: The 404 is pretty bullet proof...rarely if at all do they jump timing or get major out of any ...
SINGER "FASHION MATE" MODEL 237 BOBBIN WINDING	4/7/2008
Q: I WAS GIVEN THIS SEWING MACHINE WITHOUT MANUAL. I NEED TO KNOW HOW TO WIND THE BOBBIN. I CAN LIFT UP ... A: The bobbin winds on top of the machine. Thread to the first thread guide, but wrap through the round ...
help with 1938 singer	4/1/2008
Q: i was given an old singer machine a few years ago, it has been converted to electric but it looks ... A: Yes a picture would help determine the actual part/s required. There are different possible models, ...
Singer 503 Slant-O-Matic Special	4/1/2008
Q: Need help in buying a "special purpose presser foot" for a Model 503 Slant-O-Matic specia. It is on ... A: I do not carry the factory special purpose foot for the Slant-O-Matic, and currently do not carry ...
Singer Stylist 534 - broken feed gear	3/31/2008
Q: I believe I have a broken feed gear, I have the same problem as Cheryl. (material stops feeding, ... A: Download the free parts schematic from the Stylist page: http://www.tandtrepair.com/StylistLine.html ...
Singer Model 756 Feed Dog	3/30/2008
Q: I was in the middle of sewing with my Singer 756 and the feed dog suddenly stopped moving. I can't ... A: Almost sounds like a broken feed gear. Those are the two in the middle of the bottom pan area. I ...
singer 514 stylist	3/29/2008
Q: my thread keeps on breaking after only seconds I start sewing, are there something I can try doing I ... A: Might try my Stylist page for some help: http://www.tandtrepair.com/StylistLine.html Thread breaking ...
Nelco machine	3/27/2008
Q: I just bought a Nelco Machine at a garage sale. I tested it out and it seems that the bobbin ... A: Best place to check for a book is this site: http://www.sewingmanuals.com/ If not, then try: ...
Singer 15-91	3/27/2008
Q: I recently acquired a singer 15-91 from a friend (it did sit in an attic in the ... A: The 15-91 is a wonderful straight stitch machine, that will handle a great deal of different loads ...
motor controller	3/23/2008
Q: Iwould like to know where I might could find a new or used singer motor controller for my 1961 ... A: Most repair shops should be able to provide a replacement foot control. One might also check Ebay, ...
about Pfaff 230-260 automatic	3/20/2008
Q: would like to know how i replace the timing belt the axle seams to be very hard to remove, i don't ... A: Was about to reject this one...but shall give it a little go. It has been a very, very...long time ...
cams	3/20/2008
Q: I bought a Singer 248 Fashion Mate at a garage sale, I think it is in the 1800 series. The cams are ... A: The fact that you have a 248 Fashion Mate...that is the model and series. Anyway...any cam from a ...
15-91	3/19/2008
Q: I have a model 15-91 sewing machine that my brother gave me. It needs to have new wires to the motor ... A: Am a little supprised the repair shop doesn't offer to rewire it. I may be a little presumptuous, ...
Singer Model 638	3/19/2008
Q: I just pulled out my mom's old Singer and realized that she kept everything but the manual. I'm a ... A: Please have a visit of my web page for the 600 series T&S. You'll find instructions on threading, ...
Singer 403 Timing	3/18/2008
Q: My great, old Singer 403 started skipping stitches. Went through the steps of cleaning lint in the ... A: The 500/503 manual does apply to the 400 series Slant-O-Matics. The big difference is the bobbin ...
Singer 706 touch and sew	3/16/2008
Q: but I have a singer T&S while I was sewing the other day something went crack underneath the feed ... A: Not familiar with a 706 model. Is it a German made model? I have parts for the US models, and a ...
Thread bunching up on underneith side	3/11/2008
Q: I am having problems with my singer Slantomatic 403a. When I sew the thread on the underneath side ... A: Thread bunching underneath may be caused by several different things, but generally may be a top ...
Singer Touch & Sew Model 640	3/10/2008
Q: What should the "pattern selectors", "stitch width", "stitch length" and "tension knob" be set to ... A: Patsy, Under the top lid of the machine, where the thread goes...there should be a little panel ...
Needles for a Viking	3/9/2008
Q: I have a Viking model 2030.I have had it for many years but I can't find large needles for it. Is ... A: Most machines use a standard 15X1 needle (lenght) Size of the needle may vary from 11 - 18, with a ...
parts for singer 600e	3/7/2008
Q: Having been in sewing machine repair maby you can send me in the right direction. We have a touch ... A: Believe this is a repeat question from my web site. I have a donor 750 T&S, the springs are pretty ...
Singer 15-91	3/6/2008
Q: The motor is fine and has over a half an inch on the brushes. I got it to running and sewing good, ... A: John, Look for loose items/parts Sound travels throughout machines, and there is not real item area ...
Singer 533 timing	3/4/2008
Q: I have a Model 533 on which I just replaced the 2 "hook drive gears" (parts # 103361 & 163997). The ... A: Best bet for now is have a look at my web page for the Stylist line. ...
T & S 758	3/3/2008
Q: Machine is jamming. The hook takes one part of the upper thread loop over the bobbin and case and ... A: It could be related to: * Timing - either needle to hook and/or feed timing both * Bad/broken bobbin ...
Singer 503 foot contro	3/3/2008
Q: I have taken my machine out of the cabinet where there was a knee control attached. Now I have the ... A: Not aware of any "conversion" parts for the original foot control. You can change the foot control ...
Slant-O-Matic 503 case	3/2/2008
Q: I just bought a Singer 503. My first vintage machine! Although the machine is in nearly pristine ... A: Doubt one would find a "factory" carrying case, but might try Ray Revette. His web site address: ...
Repair	3/1/2008
Q: my grandmother has a Kenmore-Sears Model 158.10401 that she really loves (we give her a new one, ... A: Did you have any luck with that belt from Sears online, or the sewusa site? Just checked one of my ...
dating singer 99 by serial number	2/29/2008
Q: can you tell me the year my singer 99 was built or where to find out? the serial number is ... A: I show AB serial numbers from 1926-1928. A really good site for serial number dating of Singer ...
Dial N Sew FA-772 Sewing Machine	2/28/2008
Q: Who made this brand and do you know anything about this machinie? It has an attaching table that ... A: Most commonly, if I have the right machine in mind... These were sold by Tacony Corp. out of St. ...
bobbin threader won't engage	2/27/2008
Q: Terry, I have a model 354 Singer Genie sweing machine and want to rewind a bobbin. I do all the ... A: Am only able to send images via All Experts, and not entire PDF files. Will have to visit the home ...
Singer Touch-n-sew needle threader	2/27/2008
Q: I have a Singer Touch-n-sew Model 603E (Made in sixties or early seventies). Can u get a needle ... A: The factory installed needle threader...those are obsolete now, and I haven't been able to locate ...
singer machine model 603E	2/26/2008
Q: I need your help with my sewing machine. My mother gave me this machine but it is without needles ... A: Most any fabric shop, or Wall Mart should have standard sewing machine needles. The most common ...
Touch & Sew 630	2/25/2008
Q: Is there a list that exists that would let me know what discs or cams will work in my machine? For ... A: No list that I am aware off right off, but any of the Black Top Hat cams from any series of ...
thread breaking	2/25/2008
Q: I have frequently battled this machine (TNS 758)because the thread keeps breaking. Can you offer ... A: Thread breaking can be due to a number of things, almost to many to list, but: * Thread quality * ...
threading my singer	2/23/2008
Q: I think I have a 1937 Singer. It belonged to my Grandad who was Head Tailor at Bamberger's in ... A: Might try this site link: ...
bobbin loading singer 760	2/23/2008
Q: I have a singer 760 with no instuctions and would like to know how to load a bobbin, mum has tried ... A: Might try this page of my web site: http://www.tandtrepair.com/700_TanS_Items.html Under the free ...
singer 99k	2/22/2008
Q: Terry, I have an old singer 99k portable that I would like to use for on site upholstery repair. I ... A: Looping underneath is normally a top tension problem. It could be something else, but ...
Singer 411G	2/22/2008
Q: Pretty simple question but i just need a confirmation. i'm looking for a manual for the Singer 411G ... A: The German 411G is pretty much the same as the 500A, or perhaps better yet, the 401A. If I recall, ...
bobbin threader won't engage	2/20/2008
Q: Terry, I have a model 354 Singer Genie sweing machine and want to rewind a bobbin. I do all the ... A: I did see the advisory from Yolanda :) It you press the hand wheel release button, and the machine ...
Singer 401 repair	2/19/2008
Q: I have recently bought a 401 Singer, and it was in excellent condition so I thought. Upon running ... A: Sounds like oil on the motor armature, and carbon brushes. In this event, one needs to take the ...
Athena 2000	2/19/2008
Q: I just bought a Singer Athena 2000 for a couple of dollars just to see if I can get it to work. ... A: Well...am happy to hear it wasn't as bad as sounded. I would now suspect the Capacitor box, sort of ...
Singer 6136	2/18/2008
Q: Terry, I have sent you an e-mail but I will duplicate my question here. I have taken my singer 6136 ... A: Removing the other gear is pretty much like a Stylist 500 Series. There is a guide on my web page ...
Athena 2000	2/17/2008
Q: I just bought a Singer Athena 2000 for a couple of dollars just to see if I can get it to work. ... A: It appears to sound like you have issues with the electronics of the machine. Perhaps spending only ...
Inconsistent Stitches on my Singer 756	2/17/2008
Q: I am having a problem with inconsistent sized stitches on my Singer 756. For example, I have the ... A: Sounds like the machine may be out of time in relation to the hook and needle. If it sews ok with ...
Needle for canvas	2/16/2008
Q: I have an Athena 2000 and want to repair some boat canvas. Can this machine handle it and if so, do ... A: I wouldn't really push an Athena into that weight of material. However, if this is a one-time ...
Hand wheel turns but doesn't move needle	2/13/2008
Q: I just pulled out my old Singer model # 348 and it was in bad need of cleaning. It was working fine ... A: If the needle doesn't move, I would ensure the bobbin winder release is engaged. Meaning, the ...
Singer slant-o-matic 600 sewing machine	2/11/2008
Q: I have subject machine, I noted in your informtion that you say Singer 600 touch & sew, however, ... A: Well...am assuming this is a US Made machine, and most of the 600 were Touch & Sew. Does it say ...
Singer 503a fashion discs	2/10/2008
Q: My mother recently repaired her Singer 503a. While I was experimenting with the machine, I decided ... A: If it continues to drop stitches, or bunch up threads underneath. My first inspection would be the ...
machine runs slow	2/9/2008
Q: why would my singer model 9034 start running really slow? it was working fine. A: It may be as simple as it needs oiling, and a little fine tuning. I have seen some later machines ...
Singer 503a fashion discs	2/9/2008
Q: My mother recently repaired her Singer 503a. While I was experimenting with the machine, I decided ... A: Doubt you have broken anything right off. The 503 is a pretty tough machine. I'd change the needle, ...
repair of tension dial on singer stitch sew quick	2/7/2008
Q: I have a hand held singer stitch sew quick, which was working fine until the tension dial fell off. ... A: Well...right off, I have no knowlegde of those units, but you have mapped out the parts enough to ...
Singer Genie	2/6/2008
Q: I got a Genie from ebay and the thread holder has been pushed in to far and I do not know how to get ... A: Need to remove the side cover by the needle bar. One screw. There are two hidden screws in that ...
Vintage Singer 15-91 Wiring Diagram?	2/6/2008
Q: I just purchased a 15-91 ca 1937 in the library table. Don't ask me why. I don't sew, don't intend ... A: Yes there are wiring diagrams available on most of the Yahoo sewing sites: wefixit - ...
Singer Genie	2/4/2008
Q: I got a Genie from ebay and the thread holder has been pushed in to far and I do not know how to get ... A: Yes, you need to remove the back cover, and side needle bar area cover. The spool pin is part of ...
Dials will not turn on 401a	2/4/2008
Q: I just got a used Singer 401A today. It sews and everything looks and sounds great but the dials ... A: Sounds like the pattern/cam followers are stuck in place. This is mainly due to old dryed oils, and ...
Foot pedal plug broken - Singer 7462	2/3/2008
Q: We have a Singer 7462. I went to plug in the foot pedal and there was just a hole - the female end ... A: I do not have a schematic for the 7462, so a little hard to say. General rule of thumb... The ...
HOW TO OIL	2/3/2008
Q: MY WIFE HAS A SINGER 404 MACHINE. TENSION DOESNT WORK STEADILY. I'VE BEEN CLEANING IT UP AND WOULD ... A: Basically a drop of oil where metal rides metal will do. Remove the top, side cover, and bottom pan, ...
I think I broke it!	2/2/2008
Q: I was darning a pair of jeans and going over the same spot repeatedly when some of the threads, a ... A: Sounds like a broken feed gear right off... Not knowing which model you have...sort of a guess. ...
DIY timing on a T&S 646	2/2/2008
Q: Help! Yesterday I just had 5 gears replaced in my Singer Touch&Sew 646. The machine worked fine for ... A: I'd find it odd to have a machine jump time so quickly after having all of the 5 major gears ...
Red lever on 401A	1/31/2008
Q: I just bought a 401A which I have wanted for a long time. It hummed right along so I decided to try ... A: Little hard to trouble shoot this with the information given. Let me ask...if you put it back to ...
Singer Touch and Sew 750	1/30/2008
Q: My singer will not pick up the thread from the bobbin. What is the proper procedure to fix this? I ... A: Well...lets start off simple... Put a new needle in the machine, ensuring the flat side faces the ...
foot control on my singer	1/29/2008
Q: I have a singer # 9022 I think the foot needs to be replaced as it doesn't seem to want to go at a ... A: You may be able to repair the foot control, and save a few bucks. Most of the newer models pull ...
Singer Genie 354	1/27/2008
Q: I got this from ebay and it came without a manual and as-is. I've gotten the needle and bobbin ... A: Yes, you should use genuine Singer bobbins, which is recommended. Needles…you may use Singer ...
Bobbin	1/27/2008
Q: I have a Sears Kenmore Sewing machine model 158.17550. I can not wind the bobbin. It sew very will ... A: I am not familiar with this model right off, but would have a better idea after seeing it. ...
Squealing Singer 201	1/26/2008
Q: I bought a Singer 201. Had it serviced last May and closed it up in a cabinet until yesterday ... A: Couple of spots come to mind when the 201 squeaks, or makes a squealing sound. * The motor armature ...
Singer Genie 354	1/26/2008
Q: I got this from ebay and it came without a manual and as-is. I've gotten the needle and bobbin ... A: I suppose the best way to start, lets check the simple things first :) Try a new needle, and ensure ...
Singer 500A stitch selection	1/24/2008
Q: I bought a Rocketeer. I tried pushing/pulling the gold/brown dials to move them to select a stitch, ... A: No...do not think you are missing anything. Just sounds like purely stuck cam followers to me. On ...
SINGER 513	1/22/2008
Q: THE THREAD IS NOT CATCHING WHEN THE NEEDLE IS DOWN INTO THE BOBBIN WHAT SHOULD I DO TO REPAIR THIS ... A: The problem could be due to a few things, but my first guess for an older Stylist could be broken ...
top thread splitting at needle eye	1/19/2008
Q: I have an early Singer 600 Touch and Sew. Earlier today I had problems getting it to thread the ... A: When one starts dealing with upholstery thread...it becomes a whole new ball game. One that I cannot ...
500 a lower tension	1/19/2008
Q: I bought a Singer 500A at a discount shop--I''m very excited! It seems to work well but I don't ... A: Normal upper tension setting on a 500A...is between 3 to 5 on the dial. Normally I set them at ...
Golden Touch & Sew 620 by Singer	1/18/2008
Q: Terry, I have an old machine that was my mother's. I had all the gears replaced recently. ... A: I would double check my threading of the machine...but you also mention the needle is hitting the ...
top thread splitting at needle eye	1/18/2008
Q: I have an early Singer 600 Touch and Sew. Earlier today I had problems getting it to thread the ... A: If the point of the hook is burr free, absolutely no hestiation of releasing the thread what so ...
Singer S59 motor wiring	1/17/2008
Q: I am in the process of putting together a Singer 31-15 industrial sewing marchine. The problem I am ... A: Sorry guy...I really don't deal with Industrial machines, or wiring of such. However, I would ...
hand wheel will not turn among other problems	1/17/2008
Q: Yesterday, I was sewing on the cloth portion of a zipper when the machine got stuck. The thread ... A: I'd remove the bobbin, and bobbin case completely. Then see if the machine continues to turn ...
401A linkage noise	1/16/2008
Q: My 401 makes a clacking noise that sounds like it's in the linkage between the needle bar and the ... A: Noises are really difficult to track down at times. I do take you have oiled it? My first guess, and ...
Vertical gear, model 413	1/16/2008
Q: My 30yr old machine has lost all of its teeth! I have taken apart what I can... no good access to ... A: I think you find just about everything you might need on my web pages for the Stylist machine: ...
singer 600 slantomatic	1/15/2008
Q: Bought this 45 years ago, and they don't make them anymore; love mine and would like to know if you ... A: Wish I could tell you exactly where to find one. The 600s are still very popular due its all-metal ...
Featherweight 221 noise	1/14/2008
Q: Just purchased off ebay. Sews fine but fastest machine I've ever seen. Red toothed belt unusual. ... A: Yes, there is a chance of the motor causing it, but really doubt it. Best way to tell...remove the ...
Pfaff 230	1/12/2008
Q: The needle hits the bobbin case when it is down. It was working fine until I took out the bobbin and ... A: Seems a little odd, change a bobbin and now it is hitting it. Silly question perhaps...but: you are ...
Stylist 513	1/12/2008
Q: I found a stylist 513 machine at a yard sale, and wanted to learn how to sew on it, but had trouble ... A: Just for the record...all future emails would be better directed to me via the site :) The owners ...
kenmore sewing machine	1/11/2008
Q: i got an old kenmore sewing machine but i don't have a complete manual on how to use it i have ... A: I can't help myself, but perhaps this site can help with your search: ...
Stylist 513	1/9/2008
Q: I found a stylist 513 machine at a yard sale, and wanted to learn how to sew on it, but had trouble ... A: The 513 is a pretty nice little machine in my opinion, but others may disagree...perhaps lack of ...
Athena 2000	1/6/2008
Q: My mom's Singer Athena 2000 apparently has an issue where the needle release solenoid is releasing ... A: This is better handled via my web site: http://www.tandtrepair.com Look for the Athena page. When ...
Singer model 4552SW	1/5/2008
Q: I am trying to get my model 4552SW machine's bobbin working. The black bobbin case seems to go in ... A: I have run into issues with the 4552 series with others. Is the machine fitted with the Apollo style ...
bobbin	1/4/2008
Q: I have a Singer 4832C sewing machine. It sews beautifully for awhile and then the thread balls up ... A: There are a number of things that may cause thread to bunch underneath. The first thing I always ...
Singer 95-1	1/3/2008
Q: Terry - I have a Singer 95-1 industrial machine. There are three points on top where it says to ... A: Wish I could really help, but I deal with house hold machines more than Industrial machines. Best ...
Singer 411 - motor	1/1/2008
Q: I have bought an old singer 411. I have to wash down the motor and replace the carbons because smoke ... A: The motor is generally held in with 1 screw, and a bracket. I do not have any reference, or ...
Singer Futura II 920	1/1/2008
Q: I have a Futura II 920 gold lid sewing machine my mom bought at a second hand store for $5. We ... A: Apologies for the late reply. When you take the needle plate off, you can tell which feed dog it is ...
singer 600E series	12/30/2007
Q: my machine makes alot of noise,and the bobbin moves around causing my needled to break;the whole ... A: This is one of those cases where I really need additional information... It is loop thread under the ...
1947 Singer wiring and troubleshooting	12/30/2007
Q: I got my daughter this machine (model AH020989) and when I picked it up, the wiring for the foot ... A: Basic rule of thumb: Assuming it is a Single Lead Power Cord... Looking at the 3 pin plug unit, if ...
SINGER GOLDEN TOUCH AND SEW	12/29/2007
Q: I HAVE A MODEL 640 THAT WAS GIVIN TO ME. THERE WAS NO BOOK WITH IT. I AM HAVING PROBLEM WITH THE ... A: The problem may be due to one, or several different adjustments that it may require. * Top Tension * ...
singer slant-o-matic 403 special tension?	11/27/2007
Q: I have a problem with the thread bunching up under the cloth it is the top thread that is bunching ... A: There may be lint, or broken thread stuck between the tension discs. Sometimes it can be cleaned ...
Singer 750 model Big Problem	11/25/2007
Q: My Mother machine, start to bunch the top thread on the bottom part of the material when sewing on ... A: Sounds like there may be a piece of lint stuck between the top tension discs. Best way to check to ...
T&S 758 - feed timing	11/23/2007
Q: I had a slipping timing belt, probably caused by a loose belt and also a dirty lower cog. After I ... A: Glad to hear you got it working. Was it the setscrew that sets on a flat spot of the shaft? Just ...
Treadle machine	11/22/2007
Q: I am trying to find out how old our treadle sewing machine is, but cannot find a manufacturer or ... A: Singer was about the only company that I am aware of that recorded machines by date, and year of ...
threading Singer 100	11/21/2007
Q: I also recently got a Singer 100 without a manual and am having difficulty troubleshooting. I ... A: Generally bunching underneath the fabric is related to top tension. However it could be caused by ...
Oiling my Singer T&S 600E	11/21/2007
Q: I would like to oil my Touch and Sew 600E but do not have the owners manual and have no earthly idea ... A: General rule of thumb, a drop or two, where metal rides against metal should do the trick. Remove ...
golden touch and sew 750	11/20/2007
Q: I just got this at a thrift store. Oiled everything and it straight sews wonderfully. When I try ... A: I wouldn't think it a gear at the moment. If both the selectors are on the cam picture, and you are ...
Singer Treadle	11/19/2007
Q: am refurbishing one for my wife and I am looking for the decorative scroll work (transfers?). I ... A: Only person I ever knew that had the decals, was Budd's Sewing Machine Company in Fresno, CA. That ...
foot controller	11/18/2007
Q: It starts OK then the speed starts slowing down after a minute or two. Can this be fix or do I need ... A: Could be a foot control problem, but my first guess is that the machine may need a little drop of ...
sewing	11/12/2007
Q: my machine sews three stitches and the threads bunch up underneath what causes this? A: Depending on make and model, could be a number of things. Generally two basic reasons: 1 - top ...
Singer Stylist 534	11/11/2007
Q: the fabric is not feeding through the machine. I suspect that the feed dogs are down. How do I ... A: I suspect a broken gear. Remove the bottom covers, and you will see the two feed drive gears just ...
Singer 1120.. Need help soon!!!	11/10/2007
Q: The thread keeps coming out of the needle it does not break, it just does not sew anything when I ... A: It sounds like the hook, where you snap the bobbin in at, may have a burr on the point, and is ...
needles for models 750 singer golden touch	11/10/2007
Q: are all singer needles the same in length for all models my needle does not fit my model and is ... A: All of Singers newer model "home" machines, like the 750 use the same needle. They are commonly a ...
Threading An Old Machine	11/9/2007
Q: I recently acquired a Nelco sewing machine, Golden Stitch series, and it did not come with a manual. ... A: Models vary, and without a model number, it is hard to say. I would suggest trying this site for ...
Stitch troubles with my Singer 500a	11/8/2007
Q: I recently inherited my grandmother's Singer 500a machine and just started sewing with it. However, ... A: Sounds like a top tension issue, but could be a bobbin, or other related bobbin area issue. Hard to ...
singer 758	11/7/2007
Q: I got a singer at a flea mkt and the lower thread keeps jamming the machine. Can you give me an idea ... A: If the machine is bird nesting threads in the bobbin area, could be a top tension problem, or as ...
Futura II Model 920	11/7/2007
Q: My Futura II has quit working. Repair shop stated it was a timing belt. I plan on purchasing the ... A: While the site "All Experts" is a free service, unfortunately, my own web site is not a "free" ...
Cams for 401A Singer	11/5/2007
Q: Do the cams for the 503 also work for the 401A? A: Yes, the 503 cams will work in a 401A. All the black cams, even from the 600 series Touch & Sew, ...
Singer sewing machine manual	11/4/2007
Q: I can't find the manual for my old Singer stylist 534. I read a link to a website where a lady on ... A: Try this site: http://www.sewingmanuals.com/Sewing_Machine_Manuals/Singer.htm They have a download ...
sewing machines	11/4/2007
Q: What is the list of possible problems when the needle won't pick up the bobbin thread? I have a ... A: On the Touch & Sew, unless all the gears were changed, it may have another broken gear. There are a ...
singer 201-2 problem	11/2/2007
Q: This machine was working until I wound a bobbin according to the manual pp. 8,9. I guess I don't ... A: Well...little hard to trouble shoot, but at the risk of sounding silly, or asking a stupid question. ...
bobbin case singer 403	10/30/2007
Q: I recently purchased a singer 403, was having problems wiht wadded thread in bobbin area while ... A: On my web page for the Slant-O-Matics, I have a free guide about removing, and putting the bobbin ...
loose bobbin tension	10/30/2007
Q: I am new at sewing and have my husband's grandmother's Singer Futura II, 920 sewing machine. I feel ... A: The Futura is a tricky machine to thread. The best way to tell if the top tension is working right, ...
feed dogs	10/27/2007
Q: I have a singer stylist 534 and it suddenly stopped feeding the material through. Several sewers ... A: Sounds like a broken feed gear. Need to remove the bottom covers, and you will find the two feed ...
Featherweight 100	10/26/2007
Q: Recently, someone gave me a Singer Featherweight machine, without a book. While I was able to ... A: Just looked at Singers Schematic site, no 100 listed, but if like a 104, or 132 series...those are ...
Antique Singer Sewing Maching	10/25/2007
Q: I was just given a Singer Sewing machine, and according to the Singer site it dates back to about ... A: Hard to say, there were several different models in 1954. If you have a model number, I might be ...
Singer tension problem?	10/24/2007
Q: I acquired a vintage Singer 301A and it appears to have a bobbin tension problem. The stitching ... A: Sounds like a loop-guard issue to me right off. Could be other problems, I'd check this first to ...
Bobbin/shuttle timing	10/24/2007
Q: My1 year old Kenmore manchine stopped pulling up the bobbin thread. I took the shuttle apart-put it ... A: I mainly stick to Singer machines of older vintage. Not know which model kenmore it is, and if side ...
Singer 7184 Help please	10/18/2007
Q: Can anyone help me please, i was given this machine a few days ago and when trying to use it i ... A: Hard perhaps to explain, but for what it is worth. You have to turn the upper left position finger ...
Problem with my new Singer 1120	10/16/2007
Q: I got my machine a little over a month ago. It's been sewing perfectly fine up until yesterday. I ... A: Based on everything provided, and I did see the picture. My first guess is something is wrong with ...
vintage singer power machine	10/14/2007
Q: For a powerful, direct drive vintage machine, I am trying to decide between purchasing a singer ... A: I have a 401A myself, and just measured it. It is just a little over 7 inches from the needle to the ...
vintage singer power machine	10/13/2007
Q: For a powerful, direct drive vintage machine, I am trying to decide between purchasing a singer ... A: I believe the 401 would be lighter in weight. Am not familiar with "harp" size, don't think I ever ...
Slatomatic 401a	10/12/2007
Q: I recently acquired a 401a. When I push on the pedal the needle goes up and down slowly and then ... A: Sounds like the motor needs service, and has oil in the motor carbons. Those need to be replaced, ...
Necchi machine	10/11/2007
Q: I have been having some problems with my stitches being loose,too tight or just plain stitching ... A: I deal with Singers mainly, and Necchi is not my forte to speak. Depending on age of your machine, a ...
singer 411	10/10/2007
Q: I am an extremely novice sewer, and bought my machine 2nd hand from a garage sale. I have recently ... A: On this page of the web site: http://www.tandtrepair.com/SlantOMatics.html I usually carry a manual ...
401A and cams	10/9/2007
Q: I have a 401A machine with parts for the 'slant o matic' including several cams. I only just ... A: When using any add-on cam, the dials need to be set to B&S, then the width lever, depending on the ...
bobbin/race not spinning	10/9/2007
Q: The stitching was bunching up at the bottom, I have re-thread the machine, oiled and then cleaned ... A: If the area where you put in the bobbin doesn't have a part that spins counter clockwise when ...
genie sewing machine	10/7/2007
Q: my bottom is pucking up real bad what would be wrong top thread is fine A: The only thing that comes to mind no a Genie that is pucking material... Almost sounds like lint has ...
singer 306W	10/7/2007
Q: I am looking for Singer Free Arm, mechanical or electronic, new or used-that will accept the same ... A: I am sure there are new models Singers that will do what you ask for, like the 57820C, which is ...
Beep	10/6/2007
Q: I have a Singer 7422 that just sits there and beeps. Any thoughts? A: I have never worked on a 7422, but after looking at the schematic for one, I would have to suggest ...
twin needle	10/3/2007
Q: do you know if i can do twin needle sewing on this? I can't find it mentioned in the manual ... A: Am not familiar with a PE400D right off, and mainly stick to Singer machine related questions. But ...
Mounting machines to table	10/3/2007
Q: My mother has an old Singer Touch n Sew (638 I think?) mounted to a wooden table by hinges on the ... A: I honestly do not do cabinet design and rework... But the essance is, if the machine is suppose to ...
Machine problem	10/1/2007
Q: I have a Singer Futura 2 model 920. It will only sew very thin layers of fabric. The least bit of ... A: That sounds a little tricky to troubleshoot, but does sound like the motor belt is to loose now. ...
Singer Machine leaving black marks	9/29/2007
Q: My Singer machine is leaving black marks on the fabric I am sewing. It appears to be coming from a ... A: You need to replace the feed dogs. They are made of rubber, and over time, they melt down. I carry ...
bottom stitching seems knotted	9/27/2007
Q: I do not have a singer, I have a kenmore, but am hoping that you can help to fix problem, it may be ... A: Being it is a Kenmore, and like Singer, there are many different model types. All of which have ...
singer 758 touch n sew	9/26/2007
Q: I have a singer 758 touch-n-sew and when I sew the metal bracket(?) that the bobbin sets in keeps ... A: On my web page for the 700 T&S's: http://www.tandtrepair.com/700_TanS_Items.html There is a free ...
Needles	9/26/2007
Q: I have an old Singer 600 model that I have just inherited. I am new to all of this but have some ... A: Most any fabric shop should have needles that will fit the 600 Touch & Sew (T&S). Red Band for ...
Singer 99k foot pedal	9/25/2007
Q: my Singer 99k foot pedal produced some smell and it was very hot and at one stage, the machine ran ... A: The 99K had a couple different pedals that came with them over the years, and even with that, not ...
singer model 15	9/24/2007
Q: A gear driven model 15 singer sewing machine should not have a belt showing right? That would make ... A: Well, depends on which 15 class I suppose. A 15-91 was gear driven, like a 201, but I suppose ...
singer futura 11 model920	9/23/2007
Q: I just bought one of these machines and would like to know how to oil it. My husband is very handy ... A: All in all, the Futura was sold as non-oiling. However, most machines over time require a drop here ...
singer 6105	8/24/2007
Q: the feed dog in my sewing machine dosn't seem to be moving much at all and when I sew the fabric ... A: I would suggest removing the bottom cover, think about 4 screws hold the pan on. Have a look at the ...
Singer Machine Model L47	8/24/2007
Q: I have a Singer machine with L47 marked on the casing just above the stitch length dial. it also has ... A: A good photo of the front of the machine would help. Not sure if you already sent one or not, but if ...
Slant-o-matic repair	8/22/2007
Q: I have a Singer 401A Slantomatic and the stitching guide that flips up on top came loose. How do I ... A: Not sure I really understand what has come loose. Do you mean the top lid cover that flips up, where ...
Singer Stylist 533	8/21/2007
Q: I do a lot of sailing and have been thinking of buying an older machine to assist with ... A: I am pretty huge Singer Machine fan myself, and a 533 was a fairly decent Stylist machine. Like any ...
Euro-pro 9110 Bobbin not Catching	8/21/2007
Q: I have a Euro-pro 9110 that is less than a year old. I have had a lot of problems with thread ... A: If this is a Singer 9110 model, you might find some help on my web site: www.tandtrepair.com I have ...
bobbin not responding	8/19/2007
Q: We have a very old Singer Stylist 534. We received it second hand and it hasn't worked well. I ... A: Almost sounds like a broken gear if nothing is turning. Remove the two bottom covers, should be one ...
slantomatic - singer	8/16/2007
Q: I bought a slantomatic, but am having trouble finding parts - the auctions get too costly or I miss ... A: I wouldn't say it is non-profit work that much, as there are instance's where I may need to redirect ...
Singer Featherweight 221-1	8/15/2007
Q: My little machine has always sewn like a dream. I've had it about 5 years. Now I'm having to press ... A: I would first try adjusting the belt tension, which is done by loosening the screw on the motor, and ...
Singer T&S Model 600	8/14/2007
Q: When I sew, the stitch is so loose on the bottom side of the fabric. I've tried adjusting the ... A: Normally, loose stitches, or bird nesting, underneath is a top tension problem. Best way to see if ...
Singer T&S 630 top gear	8/12/2007
Q: My wife's 630 just killed a couple teeth on the top vertical gear. (163328). I saw your answer from ... A: To remove the front panel on a 630, you need to remove the buttonhole dial with a 3/32 Allen Wrench. ...
singer model 638	8/12/2007
Q: It has a broken upper vertical shaft gear. There is a receipt for other gear replacements about 10 ... A: The 638 was a pretty fair machine all in all. If all it needs is a top gear, might have a go at it. ...
401A needle not moving!	8/10/2007
Q: I was raised sewing on a Singer 403, the same machine my mom was taught on. Several years ago, we ... A: This could be difficult to troubleshoot without seeing it first hand. I would try removing the ...
zipper foot attachment	8/8/2007
Q: I have a Singer Touch and Sew Model 648. I have lost the zipper foot attachment and am trying to ... A: If I recall right, didn't your 648 come with an all metal adjustable zipper foot. One that bolted ...
Singer 3116	8/7/2007
Q: I was sewing with the machine and all of the sudden the needle wouldn't go down. It hits on ... A: I do not have a schematic for the 3116, but... If the needle is hitting the part that spins around ...
threading a Featherweight #221	8/6/2007
Q: I have a machine I inherited and am trying to use for the first time. The machine is threaded, the ... A: There are several 221 sites available that have a download of the manual. I have it available as ...
600e thread tearing	8/2/2007
Q: I am having troubles sewing through multiple(5) layers of fabric. I am using a #16 needle with ... A: Thread tearing may be the cause of a hook that has a slight burr on the point of it. It might be a ...
534 stylist machine	8/1/2007
Q: i have a 534 singer stylist machine and all of a sudden while i was sewing the macterial stopped ... A: Sounds like it might have a broken feed gear. Fairly common for the Stylist line to break a gear ...
squeaking machine	8/1/2007
Q: My sewing machine occasionally squeaks, mostly when it is slowing down but never at fast speed. ... A: Squeaks are tough to trouble shoot without seeing it first hand :-) Does the White have a dual belt ...
Kenmore 50	7/31/2007
Q: I realize that kenmore brand sewing machines aren't your area of expertise, but I'm hoping you can ... A: Don't recall the model right off, but... General rule of thumb...most motors are held together by ...
singer rubber feed dog	7/30/2007
Q: Can I replace the rubber feed dog for singer sewing machine touch&sew zig zag model 758 for the ... A: I don't know about the Singer Samba machine. There are metal feeds available for the 758. Part ...
Singer Stylist 533	7/28/2007
Q: I have a Singer Stylist 533. The needle is coming down and hitting the plate below the bobbin. It ... A: It does sound as if it is out of time, or the needle bar has slipped. Most common problem with ...
differrent finishes for 201-2? Where to oil	7/27/2007
Q: Bought 201-2 vintage singer @ thrift shop. When compared to mine I already have noticed mine has a ... A: If I recall correctly, most 201 machines have a fairly shinny finish. The motor lube screws are at ...
electric cord	7/26/2007
Q: I looked at my electric cord & noticed a prong was missing. I don't know the part name or number. Is ... A: Which model machine do you have? New replacement cords should be available. Or are you talking about ...
Singer Sewing Machine Athena 2000	7/20/2007
Q: I am unable to thread my bobbin automatically on the machine. Everything seems to be working, but ... A: On my web pages at: http://www.tandtrepair.com/Athena2000.html There are bobbin winding instructions ...
ATHENA 2000	7/18/2007
Q: I "rescued" an Athena 2000 out of my friend's neighbor's trash. When I sat down to it I was super ... A: Well glad to hear it isn't going to the dump. Machines should be disposed of properly to begin ...
bobbins	7/16/2007
Q: I have a new horizontal sewing machine that came with a few bobbins. These new plastic bobbins are ... A: Depending on the model number, there is a difference in the bobbins for a Athena/Futura style ...
Singer dating questions..	7/14/2007
Q: I saw somewhere that you broke down the singer serial number to pinpoint the date of manufacture. I ... A: Singer did the serial number dating with the Futura & Athena lines. Not sure if they continued that ...
Singer 500A vs 503A Slant o Matic	7/14/2007
Q: I'd like to know the major differences between the two Singer Slant O Matic Rocketeers and if one ... A: The 500A was the top of the line, and has many built in stitches. The 503A was next to the top of ...
singer cams	7/13/2007
Q: I found cams for a 300 series singer do they fit 600 series touch and sew? The price is good. Also ... A: No...the 300 series will not fit the 600 series. Not quite sure where a list would be showing the ...
feed dogs	7/12/2007
Q: My machine is NOT a singer, but if you could even guess it would be appreciated. The machine is a ... A: Bummer... If the part that slides into the feed height control area...might see if you can just put ...
feed dogs	7/9/2007
Q: My machine is NOT a singer, but if you could even guess it would be appreciated. The machine is a ... A: Generally most machines have a dial of some sort over on the right side...on the bed of the machine. ...
Singer 201 vs. singer 221	7/9/2007
Q: I am looking for an old singer sewing machine and I couldn't decide if I need 201 or 221. I am a ... A: The 221 weights about 11 pounds, but is belt driven. The 201 is a heavy machine, not sure of the ...
Singer 600E Will Not Run	7/7/2007
Q: Was sewing with my Singer 600E, the light blub blew out and machine stopped running. The foot pedal ... A: Sounds like it could just be a shorted cord at this point. I think all you might need to do is ...
singer sewing machine model 222k made in 1954	7/7/2007
Q: i have a singer sewing machine model 222k which it was made in 1954 its in immacculate condition and ... A: Generally I do not answer value questions. However, you might search the featherweights on Ebay. You ...
Singer 401A	7/5/2007
Q: My wife uses a 401A and it seems the machine will sew a short while and then the thread breaks from ... A: First I would try a new needle, and perhaps a different brand of thread. I would also check the ...
needle not moving	7/2/2007
Q: I have a sewing machine that I used for about 6 month, and lend to a friend for 1 year. He returned ... A: Which model machine do you have? It could be a broken belt, gear, or other problem, but to better ...
bobbin trouble	7/1/2007
Q: my Grandmother gave me her Singer Touch and Sew model 628 and I'm having trouble threading the ... A: Depending on the bobbin winder lever system used in your 628, it should be repairable. Please visit ...
Siner Futura 920	7/1/2007
Q: I have my mom's Futura II 920. I took the bobbin out to reload...then found some instructional on ... A: The bobbin case isn't meant to come out on its own. One can remove it, but it shouldn't pop out. ...
Featherweight 221	6/29/2007
Q: I inherited my mother's FW 221. All parts are there and all are working just fine. However, my top ... A: My first guess it is the loop guard. It is quite common in the 221 & 301 models. I have a fix ...
no fancy stitches on used machine	6/29/2007
Q: I'm hoping for a referral or advice. I just got a (1980's?) "New Home" machine with internal (not ... A: No worries, older New Home machines generally work pretty good. Course, depending on which model ...
Singer 6038C	6/26/2007
Q: My sewing machine has a reverse button which attaches to the top of a bolt. I have inadvertently ... A: Sounds like the little nut at the back of that part has fallen down inside the machine. If you turn ...
brother sonata model 6680C compu-sew sewing machine	6/25/2007
Q: my sister gave me this machine,but there wasn't a manual.can you tell me anything about it or where ... A: Could you double check the model number? I am logged into the Brother support site, and not finding ...
singer stylist 534	6/24/2007
Q: Recently I bought a singer stylist 534 but I have no idea how to change the sewing direction. It ... A: Check the top right dial that is j