AllExperts > Experts 
Search      

Small Engines (Lawn Mowers, etc.)

Volunteer
Answers to thousands of questions
 Home · More Questions · Answer Library  · Encyclopedia ·
More Small Engines (Lawn Mowers, etc.) Answers
Question Library

Ask a question about Small Engines (Lawn Mowers, etc.)
Volunteer
Experts of the Month
Expert Login

Awards

About Us
Tell friends
Link to Us
Disclaimer

 
 
 
 
About John C. Bridgers Sr.
Expertise
Small Engine Service Center Co-Owner - ATVs, Mowers, Trimmers, Snow throwers, and Many Other Small Engine Operated Equipment. I can answer questions pertaining to Most Lawn and Garden Equipment, e.g. riders, tillers, trimmers, cement mixers, chainsaws, etc. I have been repairing small engines for 34 years. Briggs & Stratton, Tecumseh, Kohler, Lawn Boy, Stihl, Poulan, Mac, and Honda; to name a few.

Experience

Past/Present clients
I have worked on small air/water cooled engines for 34 Years. I performed warranty work for Lowes of Wilson and other retailers in the area. I Own a Yard Maintenance and Certified Small Engine Repair Service Center.
 
   

You are here:  Experts > Home/Garden > Home Appliances > Small Engines (Lawn Mowers, etc.) > Scotts Lawn Tractor L2548

Topic: Small Engines (Lawn Mowers, etc.)



Expert: John C. Bridgers Sr.
Date: 7/23/2008
Subject: Scotts Lawn Tractor L2548

Question
Hello! My Scotts Lawn tractor L2548 (purchased new in 2002)will start and run with the brake pedal pushed and held in. If I let go of the brake pedal the engine stops running instead of idling. Also, If I hold the brake pedal in and pull the switch to turn on the mower deck, the deck will start to run but the engine will stop running. I have the operator's manual but it does not have a wiring diagram. Any ideas would be greatly appreciated! Thank you, Bob

Answer
Hello Bob:

This is Easy. The Seat Safety Switch is Bad or has a Bad Connection. The Following is the Instruction File for Checking the Seat Safety Switch. **Check the Seat Safety Switch. PLEASE REMEMBER THAT THE INSTRUCTIONS FOR CHECKING THE SAFETY SWITCHES IS JUST THAT!!! FOR CHECKING ONLY. I NEVER Suggest a Mower be Operated with a Safety Device or Switch Disconnected or Bypassed. Now. On Some Model Mowers you can Simply Unplug the Safety Switch from the Harness. On Other Models you have to Place a Jumper Wire Between the Harness Terminals (on the 4 Post Switch Jumper from Same Color Wire to Same Color Wire). The Seat Safety is Showing No One is Seating in the Seat when the Clutch or Blades are Engaged.**  If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John

Add to this Answer    Ask a Question



  Rate this Answer
   Was this answer helpful?
Not at allDefinitely              
   12345  

     
About Us | Advertise on This Site | User Agreement | Privacy Policy | Help
Copyright  © 2008 About, Inc. About and About.com are registered trademarks of About, Inc. The About logo is a trademark of About, Inc. All rights reserved.