AboutJohn C. Bridgers Sr. Expertise Small Engine Service Center Co-Owner - ATVs, Mowers, Trimmers, Snow throwers, and Many Other Small Engine Operated Equipment. I can answer questions pertaining to Most Lawn and Garden Equipment, e.g. riders, tillers, trimmers, cement mixers, chainsaws, etc. I have been repairing small engines for 34 years. Briggs & Stratton, Tecumseh, Kohler, Lawn Boy, Stihl, Poulan, Mac, and Honda; to name a few.
Experience
Past/Present clients I have worked on small air/water cooled engines for 34 Years. I performed warranty work for Lowes of Wilson and other retailers in the area. I Own a Yard Maintenance and Certified Small Engine Repair Service Center.
Question I have an older crafstman rider it has an 8 horse power engine .what are the air and idol screw adjustments on them ... how many turns out ? thanks for your time , Glen
Answer Hello Glen:
I Have had to Answer this Question so Much that I made a File that Holds the Answer. :-) This is for a Carburetor Cleaning and Rebuild. The Carburetor Air Mixture Settings are in the Text. **The High Air Mixture Screw is In the Carburetor Bowl in the Center of the Nut or Some Carburetors have Both the Low and High Side by Side on the Top Side of the Carburetor. The Screw Closest to the Engine Is Usually the High Air Mixture Screw on this Type Carburetor.The Low Air Mixture is the One at Top on the Side and Goes Into the Carburetor. Some have the Idle Air Mixture Screw Going Vertically Into the Top of the Carburetor. The Idle Screw is the One that Moves the Throttle Plate. The Following is the Directions for Setting these Screws. **If the Carburetor was Soaked Overnight in Carburetor Cleaning Solution and the Passages Blown Out with Compressed Air, then we can Set the Air Mixture Screws. ***Turn Both Air Mixture Screws In Until Seated. **DO NOT JAM SNUG ONLY** Turn Both Screws Out 1 1/2 Turns. Set the Throttle to Full Open and Start the Engine. Override the Throttle by Pushing the Governor Arm by Hand and Turn the High Air Mixture Screw(bottom of the bowl) In Until the Engine is Revving Properly. Now Slow Engine to Idle. Set the Low Air Mixture Screw so there is No Hesitation when Throttling from Idle to Full Throttle. Now Set the Idle if Required.*** Hope this Helps. I am here if you Require more Assistance. Let me know what Happens, Please. Thanks.
