You are here:
- Home
- Home/Garden
- Home Appliances
- Small Engines (Lawn Mowers, etc.)
Small Engines (Lawn Mowers, etc.)/Questions Answered by Expert David R -GlobalTek LLC
| Subject | Date Asked |
| Chinese Mower Engines | 12/17/2011 |
| Q: I am just curious. Are Briggs and Stratton making engines in China now? Thanks A: Yes, The last time I visited the Briggs and Stratton Factory they were making the Horizontal 6.5 hp ... | |
| Ryobi RM-65P 4 Stroke lawnmover | 12/15/2011 |
| Q: I just bought a Ryobi RM-65P lawnmover... I took it out of the box filled it up with oil (600ml ... A: Can you post an image of the carb so I can walk you through this. I want to make sure we are on the ... | |
| Ryobi RM-65P 4 Stroke lawnmover | 12/15/2011 |
| Q: I just bought a Ryobi RM-65P lawnmover... I took it out of the box filled it up with oil (600ml ... A: A carb cleaning or replacement should take care of the problem. Make sure you clean any foreign ... | |
| Ryobi RM-65P 4 Stroke lawnmover | 12/14/2011 |
| Q: I just bought a Ryobi RM-65P lawnmover... I took it out of the box filled it up with oil (600ml ... A: Yes, it sounds like the needle in the carburetor is stuck allowing fuel to seep into the crankcase ... | |
| Parts for chinese mystery generator | 4/10/2011 |
| Q: I have a 1500 watt chinese generator. No name brand but marketed under many brand names. Manual says ... A: Ron... Please get me a photograph or copy ALL the information from the EPA tag on the bottom of the ... | |
| Husqvarna 7021RD | 4/7/2011 |
| Q: I started my mower after the winter break and it ran for two mintues then died. I tried changing ... A: It sounds like a fuel delivery problem. Spray a little carb cleaner in the carb and then try to ... | |
| Carb pouring gas out the top | 4/5/2011 |
| Q: I have a 2001 mtd yard machine with an 18 b&s engine. The problem; while turning the engine over, ... A: It sounds like you may have a venting problem. loosen your gas cap and see if this makes a ... | |
| 287707-0225-01 | 4/4/2011 |
| Q: My Murray will start for a moment then turns off?? What can I check and how? A: Do you have a wire running to the bottom of the carb? This could be the culprit, Spray some carb ... | |
| How to raise blades and deck | 4/3/2011 |
| Q: I just bought a 1998 Murray 20,HP Twin/52" Garden Tractor, Model 460777, Type 2277E1, Code 9804135B ... A: there are two "L shaped" links on the back of the deck that have trunions on them that you turn. ... | |
| How to remove the pump shaft from a tuff torq k 71 | 4/3/2011 |
| Q: I have a 1999 John Deere gt235 with a tuff torq k 71 transmission. The cooling fan and pulley were ... A: I would not weld it on as the heat transfer from the shaft may distort some of the components inside ... | |
| toro mower | 3/31/2011 |
| Q: Good Day, I have a Toro Lawn Mower Model 20074 Serial NO. 270075530 with a battery/key start. I ... A: Janet, I looked up your mower a few minutes ago and I would say that it sounds like its time to ... | |
| snapper tiller | 3/30/2011 |
| Q: the tiller will run as long as i put gas in the carb. when it gone it quits. what can i check to see ... A: Make sure you have fresh fuel in the tank. by fresh fuel i mean fresh from the pump, not fresh from ... | |
| no gas in carb. | 3/30/2011 |
| Q: i recently asked about a craftsman mower model 917.270913 19.5hp. briggs & straton model 42E 707 ... A: When you say "fill the carb" do you mean put gas into the carb and then it runs until the fuel is ... | |
| Kawasaki 14hp FC420V AS10 Engine | 3/28/2011 |
| Q: Subject engine on a John Deere LX 172 tractor. Noise level from exhaust very high. Must wear ear ... A: Does the noise go away when u engage the blades? I must admit I am stumped... Without seeing a ... | |
| Honda GC 160 Pressure Washer | 3/28/2011 |
| Q: Bought used but looks like new. Carb is always runs wide open unless i hold it closed. Can't see ... A: When you say "runs wide open" do you mean that its running at a fixed speed? if so thats okay as ... | |
| lawn tractor starving for gas | 3/27/2011 |
| Q: i have a craftsman 42' riding mower. model # 917.270913 engine model 42E707 TYPE 2631 E3 CODE ... A: Do you have an anti fuel solenoid on this engine? Make sure that you dont have a wiring problem. ... | |
| only runs on choke | 3/26/2011 |
| Q: My pressure washer has a Briggs engine Model Number 150212, Type 0122 E9, Code 070612 with a float ... A: Steve: You did everything right. I was just saying that this is how I would troubleshoot this unit ... | |
| only runs on choke | 3/26/2011 |
| Q: My pressure washer has a Briggs engine Model Number 150212, Type 0122 E9, Code 070612 with a float ... A: You could remove the welch plugs and try to clean, but I will tell you from doing this for 30 years ... | |
| only runs on choke | 3/25/2011 |
| Q: My pressure washer has a Briggs engine Model Number 150212, Type 0122 E9, Code 070612 with a float ... A: The symptom you describe is definitely a fuel starvation problem. The first thing I would check on ... | |
| repairs to a Honda Harmony lawnmower | 2/23/2011 |
| Q: We gave our Honda Harmony to the local dealer for annual maintenance. They did the standard stuff ... A: Daphne, I would monitor the oil level on the dipstick of the engine. I suspect what prob happened ... | |
| Hard Crank B&S 16hp | 2/18/2011 |
| Q: I've read that B&S OHV engines have issues with a compression unloader lobe on the cam. Is this ... A: They did have a problem yes....I dont see it to often anymore in the shop, but if I suspect it, the ... | |
| honda engine\pressure washer | 2/18/2011 |
| Q: I have a honda gx390 13hp, on the block #are 389 cm,also gcaa/onr2 last set of numbers 4010333 ... A: Step one is to make sure your battery is good by charging it fully and doing a load test on it. It ... | |
| Briggs and Stratton 12.5hp | 2/16/2011 |
| Q: I have a Briggs and Stratton 12.5hp Model No 288707 0116-01 engine on my Murray Lawn mower. When l ... A: I need some more information...The best thing to do is to disconnect the belts from the bottom of ... | |
| carburator | 2/16/2011 |
| Q: my carburator on my 8.5 hp snow blower briggs&stratton all gumm up how do i clean it.IT start but ... A: When carbs are this gummed up, the best course of action is to simply replace them. You can try to ... | |
| I/c 319CC BRIGGS AND STRATTON | 2/15/2011 |
| Q: recently after roto tilling in january our briggs and statton i/c 8hp 319cc engine blew a hole in ... A: Briggs and Stratton has an engine that is called an INTEK. This would be a good replacement. Honda ... | |
| Honda GC Engine Reliability (Has Plastic Gear & a Belt) | 2/15/2011 |
| Q: Do you know anything about the reliability of the Honda GC engines which have at least one plastic ... A: Since this Overhead Cam design came out --Many years ago I have NEVER seen a belt break or need ... | |
| Chinese small engines | 1/11/2011 |
| Q: To your knowledge, does Champion (CPE) produce engines in China? Thank you, Floyd A: They do NOT make their own engine, my last trip over they were using LIFAN engines, but I was told ... | |
| stale gas | 1/10/2011 |
| Q: How do you get stale gas out of MTD snowthrower? It will not start. A: In the shop we use a vacum pump to remove the fuel from the tank. In your case you may need to ... | |
| briggs and Stratton Engine | 1/9/2011 |
| Q: My neighbor asked me to write; He has found an old Craftsman Snow Blower, with all of the parts. ... A: You will need the model, type and Code of the engine before I can help you further. The numbers ... | |
| 2stroke mcculline chainsaw | 1/8/2011 |
| Q: it sat up awaile pour gas down carberator no start or smoke tride starting fluide no smoke or ... A: Remove your muffler and see if the rings are stuck. You have two of the three things needed to make ... | |
| choke problem | 1/8/2011 |
| Q: I have a 8hp Tecumseh motor on a Huskee snow blower. It takes quite a little cranking to get the ... A: Ryan, The symptom you describe is caused by a plugged jet or passage in the carb a good cleaning ... | |
| kohler wont start | 1/2/2011 |
| Q: I have a cv25 kohler engine I just rebuilt the engine and cannot get it started I did not remove the ... A: There are two diodes in the wire harness that if one is blown can cause the fuel solenoid to shut on ... | |
| kohler wont start | 1/2/2011 |
| Q: I have a cv25 kohler engine I just rebuilt the engine and cannot get it started I did not remove the ... A: Len, When you said you rebuilt the engine, was there a reason for doing the rebuild in the first ... | |
| Toro 524 snowblower cam timing | 12/29/2010 |
| Q: I have a Toro 524 snowblower that I am rebuilding the engine on. Its model number is 38040 and was ... A: Ryan... Its there...look very closely at the camshaft gear.. it may be a straight line or small ... | |
| Generator problems | 12/29/2010 |
| Q: 420cc, Air Cooled, OHV, 4 stroke engine Trying to start generator less than 1 year old, and less ... A: It sounds like your engine is not getting enough fuel. The problem i suspect is either a stuck ... | |
| craftsman 536.884810 | 12/28/2010 |
| Q: do u how where i can get an carb rebuilt kit or an full carb for an craftsman 536.884810 snowblower ... A: We will need the model and spec of your engine, then we will be able to locate one most likely ... | |
| General Auger | 12/28/2010 |
| Q: I have a General #330 2 man earth auger, What kind of oil is used in the gearbox that houses the ... A: UPDATE: Above 32 degrees SAE 30, 10w30, 10w40 or 15w40 Below 32 5w30 Here is a link to an owners ... | |
| String Trimmer Starts then Dies | 12/27/2010 |
| Q: I have a Troy-bilt string trimmer that will start, but as soon as I hit the gas it acts as if it is ... A: It sounds like a carb rebuild/replacement is in order. However this repair may exceed the cost of ... | |
| Rust colored fluid leak | 12/27/2010 |
| Q: Toro snowblower ccr 3650. Began leaking rust colored fluid. Removed housing and can't locate origin. ... A: Nothing to worry about my friend... its the bolts that hold the scraper bar on. They are actually ... | |
| 247.886640 Rebuild Engine Kit | 12/22/2010 |
| Q: I broke the connecting rod on my snow-blower. In the process, it broke the piston itself. I need to ... A: You have a Tecumseh engine on your snowblower. Some parts are no longer available as Tecumseh is ... | |
| shear pin on a Simplicity 2 stage Sno-away snowblower | 12/14/2010 |
| Q: I had both shear pins on the auger shaft of my Simplicity Sno-away snowblower shear off. The first ... A: what has happened is the shaft has turned inside the auger after the shear pin broke. This can be ... | |
| help me | 12/14/2010 |
| Q: what are some of the main causes gas gets into the oil? how does gas get into the cylinder. A: I just saw this anser in the question pool. The main reason gas gets into oil is because of a ... | |
| Craftsman Lawnmower 31P777-0296-E1 | 12/13/2010 |
| Q: My husband does not use computers so bear with me I am trying to get him to explain to me what to ... A: . I saw this question sitting in the question pool this morning.... You have not told me what the ... | |
| Murray 309000x8B won't start | 7/26/2010 |
| Q: Murray 309000x8B will turn over and has spark but will not start. Engine is B&G 28R707-1120-E1. A ... A: The gas oil mix will not hurt your engine, maybe foul a spark plug but thats it. Do you have ... | |
| Engine sputters and shuts down | 7/25/2010 |
| Q: Re: Briggs & Stratton engine 14.5 Overhead Valve, Model 287707, Type 1259-E1, Code 020319ZE. In ... A: I think your on the right track with the things you have tried already, but I would go one step ... | |
| leaf blower | 7/23/2010 |
| Q: I have a 28cc two cycle craftsman professional blower. It starts great and runs great (at least for ... A: when this happens, try choking it a bit, does it run better? If this is the case you have a fuel ... | |
| Tecumseh OV195EA manual start | 7/22/2010 |
| Q: This engine is mounted on a ride-on mower that I suspect was built in Italy and which I've had for ... A: It sounds like you have a vapor lock condition. This is where the fuel actually starts to boil in ... | |
| Stihl km85r trimmer | 7/21/2010 |
| Q: Will not accelerate.Starts up fine and idles great but bogs out when you try too accelerate.Cleaned ... A: pull the fuel lines out of the tank and see if perhaps the filter is plugged? Is the line cracked ... | |
| extra gas tank | 7/21/2010 |
| Q: I have a generator with a 1 gal. gas tank. I added another gal. gas tank to it so i could go longer ... A: Without seeing what you did exactly its hard to offer advice. Is the tank you added higher? Is it ... | |
| lawnmower | 7/20/2010 |
| Q: i own a yardman rider 15.5 ohv the thing turns over really hard when trying to start even off a jump ... A: The lil thing on the bottom of your carb is an anti fire fuel solonoid. It prevents the engine from ... | |
| Add a fuel pump in place of gravity feed | 7/17/2010 |
| Q: I just installed a B&S 14.5 horse 287707 engine in a Deere 112L. Since the fuel tank is under the ... A: Yes you can add a fuel pump and there is a breather cover assy avail for your engine to do this. ... | |
| John deere 345 mower | 7/17/2010 |
| Q: The John Deere 345 mower has 18hp Koler engine. It does not start but has gas and spark. I pulled ... A: Bruce, I think you have a kawasaki engine on your JD345-not a kohler. I also think you have a ... | |
| Sears Chainsaw | 7/16/2010 |
| Q: I own a Sears 18' 40cc chainsaw - model 358.360131. The problem is that its hard to start. When it ... A: It sounds like its time for a new carb diaphragm gasket set. The rubber gaskets loose their ... | |
| Weed Eater GBI 22V | 7/16/2010 |
| Q: I have an older model gas blower (Weed Eater GBI 22V). I am trying to get it to run more smoothly. ... A: remove the muffler and make sure the exhaust ports are clean. make sure you have fresh fuel from ... | |
| 18.5 briggs no start | 7/15/2010 |
| Q: My 18.5 Briggs ohv model/31P777 type/ 0296E1 code/ 040119ZE ran fine until I started it up and ... A: do you have compression? meaning did you do a compression test? What did you adjust the valves ... | |
| Sears model 917.273070 Riding mower | 7/14/2010 |
| Q: I have a sears riding mower model 917.273070 with two problems. When you try and start it it will ... A: It sounds like you have a safety interlock problem. when you turn the key to the start position the ... | |
| repower snapper walk behind | 7/12/2010 |
| Q: have a wisconsin robins 2cycle 4hp commercial snapper. Snapper/briggs engine division told me that ... A: I understand your position here. But from what I can tell, the Briggs is going to be your only ... | |
| PTO | 7/11/2010 |
| Q: How do i remove the pto clutch coil from a Deere lx280? On the parts drawing it appears to just ... A: Richard There is supposed to be a bolt and a washer holding the clutch on. It appears to be ... | |
| My craftsman still won't start after many replacements | 7/8/2010 |
| Q: I have a Craftsman 6.75 horsepower 22" Rear Discharge Power Propelled Rotary Lawn Mower, Model No. ... A: It sounds like your flywheel key is partially sheared. You will need to remove the recoil starter ... | |
| John Deere rx75 | 6/4/2010 |
| Q: While cutting grass the mower began to jerk as if a belt was slipping regularly or a tooth on a gear ... A: Check your belts, but you may have hit the nail on the head with a broken gear. Your reverse works ... | |
| Fuel feed to chainsaw motor | 6/3/2010 |
| Q: Good Morning. I have a MAC3516 chainsaw which refuses to start. My question concerns the fuel ... A: your primer bulb is only bringing fuel to the carb. The "Fuel/AIR" mixture is when the unit is ... | |
| Riding Mower Starting Question | 6/3/2010 |
| Q: My father recently gave me a house warming gift. A 1996 TurfPro by MTD 14.5 HP / 42" Cutt 7-Speed - ... A: Jeff: Remove the cover that is over your electric start motor and clean the starter drive with ... | |
| chainsaw burnout | 6/2/2010 |
| Q: I have 3 large oak trees (4+ diameter) that I am trying to make firewood of. Trees are on the ... A: This is a tricky one to answer, but I will start with the Fuel Oil Mixture... 50 to 1 mix Ratio in ... | |
| Dead Engine | 5/31/2010 |
| Q: Hey China Dave Wrote last week about clutch safety switch. Replaced as you suggested but now have ... A: Don It sounds like you have a safety switch problem. I would begin looking at the seat switch. ... | |
| cub cadet lawn tractor | 5/30/2010 |
| Q: I have a cub cadet 1440 when i turn the pto switch to the on position the amp light comes on and the ... A: It sounds like you have a charging problem, meaning the engine is not charging enough to keep the ... | |
| sears custom 10 | 5/30/2010 |
| Q: I have a sears custom 10 that io purchased with snow blower and plow. I know small engines and ... A: David... Since your a motorhead like me, I would suggest you head on over to www.mytractorforum.com ... | |
| small engine parts and repair instructions | 5/28/2010 |
| Q: "Where can I find the "step-by-step repair procedure, fully detailed exploded view of this engine ... A: Ted, I am afraid I do not have good news for you. There is not a step by step instruction manual ... | |
| mower blades stopping and motor cutting out | 5/26/2010 |
| Q: jd gt 235 constantly stops mowing and/or stalls, any ideas? is it the seat switch? A: Yuppers.... The seat switch on this tractor series is very sensitive, especially if your petite. It ... | |
| Engine turnover issue | 5/25/2010 |
| Q: This question may be an insult to your qualifications; seems a little petty based on your vast ... A: Don, This is a common problem with the older Murray Tractors. The Clutch/Brake safety switch ... | |
| murry (old) walk behind parts | 5/25/2010 |
| Q: i am looking for a zone cable for an old murray walk behind. the #S are modle- km 4008 year ... A: The murray model number is the 22?51x12 Look on the old cable closely and you may even see a part ... | |
| Agway 4/21 power propelled | 5/24/2010 |
| Q: I picked up a free Agway 4/21 power propelled lawn mower that ran last year. The model is 122 290 ... A: I am not familiar with that Model Number, Could you please get me the Model Type and Code Numbers ... | |
| Toro Lawnmower | 5/23/2010 |
| Q: I hope that you can help me with this as I can't figure out what else to do other than hiring ... A: Sonia, There is one thing you can try, but im not feeling real good that it will help, but we can ... | |
| mower engine sizes | 5/23/2010 |
| Q: I have a self propelled walk behind mower with a 6hp engine. The model number is 12a-529n062. I ... A: Please get me the Model Type and CODE number off of the engine. You gave me the model of the mower ... | |
| INtek engine seems out of time | 5/22/2010 |
| Q: Dad has a intek engine in a 5 year old craftsman rider. this is an 18.5 hp unit Mower YT2000 engine ... A: When you reassembled the engine did you line up the timing marks on the crankshaft and the camshaft? ... | |
| spark ign. without the lawn tractor | 5/21/2010 |
| Q: I have a B&S 17HP OHV engine model311707 type0132-E1 (without the tractor) and I want to start it. ... A: You are a TOTAL IDIOT! ITS MORONS LIKE YOU that make us volunteers not want to offer free advice ... | |
| BRIGGS ANS STRATTON 17.5 INTEK BACKFIRES | 5/20/2010 |
| Q: I HAVE A SNAPPER MOWER WHICH HAS A BRIGGS AND STRATTON 17.5 H.P. INTEK MOTOR. TO THE BEST OF MY ... A: Your bent pushrod will not be the total cause of the back fire issue Since this engine did this from ... | |
| cub cadet idle issues | 5/18/2010 |
| Q: My cub cadet model 1100 will not idle at a constant rpm. It surges up and down. I cannot seem to get ... A: Hunting and surging is kind of a complex issue, it can be one single item, or a lot of little things ... | |
| ignition switch | 5/18/2010 |
| Q: i amtrying to find out if my ignition switch is wired correctly. the old switch had letters on the ... A: No I dont. Ask the manufacturer of the switch for a diagram. you will have to do a visual ... | |
| Older troy built tiller | 5/17/2010 |
| Q: I have an older troy built tiller that has the rear tines and has a reverse gear. On the front cover ... A: The numbers you are looking for should be stamped into the blower housing of the engine. They are ... | |
| Craftsman 19HP Kohler Automatic | 5/15/2010 |
| Q: riding mower. I used the mower all last summer. This year ot wouldn't start after a full charge. I ... A: To unlock your wheels there is a lever, called a bypass valve near the transmission. Make sure you ... | |
| Craftsmen Series 900 24" Tiller - Oil Leaking | 5/15/2010 |
| Q: First - I apologize for the double posting, but I asked Eric this question first but I forgot the ... A: If you clean it up it should be fine. Did you tip the unit towards the muffler by chance? I do ... | |
| HELP!!! | 5/14/2010 |
| Q: i have a 214 john deere it has a kohler motor on it model # k321AQS spec # 60270 serial # 7026415 i ... A: You my friend have a mess on your hands...you will need to do a static gov adjustment first and then ... | |
| Lawn Boy 5247 | 5/14/2010 |
| Q: I have a 5247 that start-up but doen don rev up when mowing if I cut the gas out it will rev up for ... A: You may have two problems with your lawnboy. One may be a gov spring, but more often then not its ... | |
| john deere rx95 with a kawasaki 12.5 engine | 5/12/2010 |
| Q: The carburetor was dirty ,so much it wouldn't run.I took it apart and cleaned it out ,put it back on ... A: Bruce... You are on the right path with the carb. Do not mess with the valve adjustments. Order ... | |
| Briggs engine with new magnetron coil, new plug, (Part III) | 5/12/2010 |
| Q: Briggs Model 100202, type 401020, serial 6205170 Hi, this is a full magnetron replacement of the ... A: There are two possibilities... One you have a bad coil! I know its new, but it happens.. OR ... | |
| Starting problem Sabre Lawn Tractor | 5/10/2010 |
| Q: I have had an issue with my Model 1546G Sabre (by John Deere) tractor for a couple of years now and ... A: Dean... Normally when this condition presents itself its a low battery or BAD battery. Charge your ... | |
| '04 craftsman lt1000 | 5/10/2010 |
| Q: i have a 2004 craftsman lt1000 lawn tractor with the 18hp briggs and stratton motor.i just purchased ... A: Hey Mark.. I feel your pain on this one.. Been there a time or two myself. Start with a good ... | |
| Briggs engine with new magnetron coil, new plug, (Part II) | 5/9/2010 |
| Q: I'm continuing to work on a old non-running Briggs ( Model 100202, type 401020, serial 6205170) that ... A: Scott, When you say Magnetron, is this the complete armature assy or did you just put the little ... | |
| tecumseh 17hp ohv | 5/8/2010 |
| Q: i have a murray riding mower with a 17hp ohv tecumseh engine model number 42539a. it runs only if ... A: There are 4 possibilities. 1: there is old stale gas in the carb and fuel tank. Drain the carb, ... | |
| Riding mower gas smell | 5/7/2010 |
| Q: I have a LT2000 craftsmen riding mower with a 17HP Kohler engine CV490. It seems to run fine. ... A: I am sorry you were not able to ask me a followup. I am only allowed two questions per day. Once ... | |
| Float problems | 5/5/2010 |
| Q: I have a Snapper riding lawn mower with a Briggs and Stratton 11 hp I/C engine. It will start with ... A: I can only assume without seeing the air filter that the air filter is extremely dirty and is ... | |
| craftsman 20.5hp tractor | 5/5/2010 |
| Q: craftsman tractor 20.5hp briggs and stratton model 461707 will not restart after it heats up A: How long does it take to heat up? Is it running properly before you shut it down? Does it quit ... | |
| RB-K75 carb | 5/4/2010 |
| Q: I have an SRM210 echo brush cutter that has ran like a top but it got to where it would not run all ... A: Since I can not personally see the carb, I would say its time to replace the carb with a new carb. ... | |
| BOLENS TRACTOR MOWER WONT START | 5/2/2010 |
| Q: I HAVE A 2005 BOLENS TRACTOR MOWER 38INCH 15 INCH BLADE BRIGGSS STRATTON ENGINE. I DO NOT KNOW MODEL ... A: Herb, with the palm of your hand open on top of the engine flywheel screen , try to turn the engine ... | |
| MTD Yard Machine Tiller; Briggs 5.5 hp OHV | 5/1/2010 |
| Q: Engine oil and gear oil; Fill-ports (& caps) have no ID, no dipstick. This poor machine is in my ... A: Call MTD at 1-800-800-7310 I have tried to get you a manual from their site with the numbers you ... | |
| 7.00 DOV | 5/1/2010 |
| Q: I have a snapper walk behind with a 7.00 torque DOV motor.Right after the warranty ran out it lost ... A: Robert, Contact Briggs and Stratton at 414-259-5333 ask for Doug Doughtery. He is the National ... | |
| Motor only cranks with gas in Carb. | 4/30/2010 |
| Q: I have a Craftsman LT-1000 17.5 hp Briggs & Stratton lawn tractor and it will only start after a ... A: It sounds like the fuel that sat in the carb over the winter has varnished inside of the carb. You ... | |
| ferris with kawasaki 25 hp stalling | 4/29/2010 |
| Q: my ferris which has a kawasaki 25 hp will run great sometimes, usually when it is cold, however ... A: I think that the problem is that the one cylinder with the clean plug is not firing. The first ... | |
| tiller dies under load | 4/27/2010 |
| Q: i have a tiller, model gil-1580e, with a briggs & stratton model 103202, type 0135-04, code ... A: Do you have fresh fuel??? This is an old engine and could have a bad condenser. When the engine ... | |
| generator parts | 4/27/2010 |
| Q: Im trying to locate a carburator and/or parts for a UST generator Model GG950. Can't seem to find ... A: Where did you buy this gen set from? Send me a pic if you can, if you cant, please COPY ALL the ... | |
| craftsman lawn tractor model 917.270940 | 4/26/2010 |
| Q: my lawn tractor will not start. I have Briggs and Stratton engine model 461707 type 0145-E3. It has ... A: Alex, I answered a similar question yesterday. See HUSKEE MOWER WONT START.. I think you have ... | |
| huskee riding mower | 4/25/2010 |
| Q: I have a briggs%26stratton 18.5 hp twin cylinder engine, model number 42A707 Type 2238-E1 code ... A: When you say it doesn't pump fuel to the carb-do you mean it wont pump any out of the fuel pump? Do ... | |
| rzt 42 trans oil change | 4/25/2010 |
| Q: paul here i would like to know how you would go about changing the trans oil on a cub cadet zero ... A: UPDATE 1 hour later... Paul, I found the information... You have a Hydro Gear IHT and as I ... | |
| yard machine lawn tractor | 4/24/2010 |
| Q: my lawn mower will not start.i checked selenoid and i had power to the selenoid, but the pole to the ... A: First, Check your voltage at the battery Start checking all your safety switches, at least 12.5 ... | |
| 7.00 DOV | 4/24/2010 |
| Q: I have a snapper walk behind with a 7.00 torque DOV motor.Right after the warranty ran out it lost ... A: This has not been a problematic engine thus far. I see lots of them in the shop getting prepared to ... | |
| Troy bilt mower | 4/22/2010 |
| Q: I have a 4 year old Troy bilt riding mower that I recently used to cut me and my mothers lawn with. ... A: There are two things I would look at first if this unit came into my shop, firstly I would spray a ... | |
| engine starting | 4/22/2010 |
| Q: I have a Honda self propelled HXR 21 inch lawn mower I got from Home Depot for $600. I can't get it ... A: The symptom you describe is very common after sitting for the winter. If you take the carburetor ... | |
| Kohler CV16S ignition Problem | 4/21/2010 |
| Q: Craftsman Mod. 917.271042 Mower Kohler CV16S Type PS43514 No spark-engine cranks fine. Fuel OK ... A: Relay should not cause "no spark" Separate your engine from the tractor by disconnecting the ... | |
| Craftsman riding mower wont start | 4/21/2010 |
| Q: 5 twin cylinder riding mower that wont start. The first time i tried to start it this year it ... A: Yes, you are on the right track...it sounds like an interlock safety switch..more specifically the ... | |
| 20 hp model #461707 | 4/20/2010 |
| Q: motor starts but it runs and then slows down and now I may have pull the choke closed to keep it ... A: It sounds like one cylinder is not running. There are two simple test to confirm this, one is a ... | |
| Gas Powered 2 Cycle Craftsmen Weed Eater | 4/19/2010 |
| Q: I have Craftsmen Weed Eater. It is 4-5 years old. No issues to date however, I have used it one ... A: Did you have oil mixed in the gas? The symptoms you describe sound like the engine seized due to ... | |
| Briggs twin cylinder losing power | 4/19/2010 |
| Q: I have a Briggs twin cylinder 18.5 hp, model 42a707, it starts and runs good, until you start to use ... A: Sam, It sounds like one cylinder is not running. There are two simple test to confirm this, one is ... | |
| Kohler won't start | 4/18/2010 |
| Q: I asked a question the other day about my Kohler engine Model CV15S that won't start after sitting ... A: I am a little confused by your question..."So I put a new carburetor" Did you replace the ... | |
| John Deere STX-38 | 4/17/2010 |
| Q: John Deere STX-38 mower with a Kohler Engine(ModelCV13S) Serial #2526313162 My lawn mower battery ... A: IT sounds like you have a definite short in your system that is draining the battery when it is shut ... | |
| Troy Built Riding mower | 4/16/2010 |
| Q: I have a Troy Built 20 HP 46 in cut (3 blade) riding mower that has developed a vibration when the ... A: Bent or unbalanced blades? Where the blades removed and not "seated" properly when reinstalled on ... | |
| JD S1400 | 4/16/2010 |
| Q: I have this weedeater and its a good one. While it starts, it floods out when I try to go full ... A: check and make sure your muffler screen is clean and not covered with carbon. I would simply ... | |
| John Deere L118 transmission | 4/15/2010 |
| Q: After cutting for a while (approx 1hr) my mower quits moving. I shut her down for while and let it ... A: Sad to say, but yes your transmission could be going bad. You have not told me if its a gear or ... | |
| toro mower leak soil | 4/14/2010 |
| Q: my toro 20064 started to leak oil through the air filter. well, the oil doesn't just leak; it flows. ... A: Adrian, you dont tell me which gasket is broken. Have you checked your oil level? There should ... | |
| riding lawnmower | 4/13/2010 |
| Q: David, i have a john deere x300 riding lawnmower.it has a 17hp Kawasaki 2-cylinder gasoline powered ... A: Now that you given the engine time to break in, I would put Mobil 1 in the engine. Remember, just ... | |
| Fule Solenoid for a Scotts 17hp. Lawn tractor | 4/12/2010 |
| Q: Is there any way I can check to see if the fuel solenoid is working the way it should be working. A: Fuel Solenoid? I believe you are talking about the electric FUEL SHUTOFF solenoid located on the ... | |
| Echo backpack blower | 4/12/2010 |
| Q: have a an Echo backpack power blower model #PB413H, ser# 09055946. It starts up OK but when I "give ... A: It may be the carb, fuel filter or fuel line from the tank to the carb. Does it feel like bubble ... | |
| vanguard 23 HP | 4/11/2010 |
| Q: model-386777 type 0036-e1 code-05090811 I have this 3 year old motor with 150 hrs on it on a 60 inch ... A: It sounds like you may have a broken connecting rod,popped valve seat, blown head gasket, Take a ... | |
| John Deere starting problem | 4/10/2010 |
| Q: I have a John Deere 425 tractor which I've recently overhauled the engine. I tried to keep the wires ... A: Joe.. This is really hard for me since i dont have a schematic in front of me, I could prob get you ... | |
| B&S engine won't turn | 4/9/2010 |
| Q: I have a B&S 128600 series 7hp OHV engine on my lawn mower. When I try to pull the starter cord, ... A: Are you holding the lever on your handle when you turn your engine over. have you reinstalled the ... | |
| CRAFTSMAN LTX LAWN TRACTOR | 4/8/2010 |
| Q: WHY DOES MY LAWN TRACTOR SPIT GAS WHEN I FIRST START IT? HOW DO I REPAIR IT? THE MOTOR IS AN 18 HP ... A: I can only surmise that there is fuel that is getting past the inlet needle and is pooling. Upon ... | |
| honda gx 120 water pump | 4/6/2010 |
| Q: I have a gx 120 water pump motor. A nn for some reason it will run for 15 seconds fine than die. I ... A: Allan, Check your engine oil level, make sure it is completely full. If the problem still exist ... | |
| loncin vs honda | 4/5/2010 |
| Q: Sir: i purchased a trencher from Harbor freight it carries a Loncin 270F I believe it is a 9hp, i ... A: What parts are you looking for specifically? The Chinese engine manufacturers DO NOT UNDERSTAND our ... | |
| Kohler 12 HP K103 Spec. 47723D | 4/5/2010 |
| Q: I know she is past 30 but so am I. I want to do a quality rebuild. But: I put in a new piston and ... A: I believe you are talking about a Kohler K301, NOT a 103 correct? This is a straight rod correct? ... | |
| engine want start | 4/4/2010 |
| Q: what could be the problem i have a 18.0hp 42in. mower eight years old model of engine 31h777 type ... A: Try to turn the engine over by rotating the flywheel with your hand. Does it rotate freely? It ... | |
| kohler engine carburetor | 4/3/2010 |
| Q: How do you rebuild a kohler engine carb? ANSWER: Please provide me with the Model and Spec number ... A: Once carb is removed you disassemble it, Get a KOHLER CARB KIT 12 757 01-s ( LIST PRICE ... | |
| John deere 265 backfiring and wont start | 4/2/2010 |
| Q: I have a john Deere 265 and it will not start. I think that there are two problems. 1st There is ... A: Do you have fuel in the gas tank? How fresh is your fuel? Make sure you have FRESH fuel in the ... | |
| model #228511x8e lawnmower | 4/1/2010 |
| Q: Haven't ran lawnmower for awhile, and after putting fresh gas, new plug, and cleaned air ... A: Replace the carb or disassemble it and clean it completely. Your fuel nozzle (the pipe that allows ... | |
| low compression | 3/6/2010 |
| Q: Kohler Magnum MV16S Spec# 56521 - Very hard to start & requires carb cleaner to get it running. ... A: It will be an expensive engine to overhaul. but not that big of a deal. It may be a little ... | |
| Replacement Engine | 3/5/2010 |
| Q: Model 190402 Type 4015-01 Code 90113010. I have not found a mreplacement as of today and have been ... A: Mark, Where in the USA are you located? send me a followup and I will try to point you in the ... | |
| Id of model and spec. no | 3/4/2010 |
| Q: I have a new Kawasaki engine That I purchased from a gentleman that went out of his small engine ... A: Don It appears you have purchased an engine that was designed for an OEM. You will find very ... | |
| Chinese Generator Question | 3/2/2010 |
| Q: I have a 2000 watt digital generator TM-DY2500LBI and the max output is 2200watts and since it was ... A: Is this a TIGMAX Generator by chance? Does it say anything else on the Emissions label such as ... | |
| gas problem troy bilt cultivator | 3/2/2010 |
| Q: troy bilt 4 cycle gasoline cultivator/edger. Eng: 841-010339 SN:E404Y35000786. The engine will ... A: Are you sure this is a 4 cycle? Do you mix gas and oil with the engine.... It sounds like you have ... | |
| Kawasaki engine reving | 2/28/2010 |
| Q: At the end of the season last year I was changing the blades on it and had the front of the deck ... A: Did you by chance damage your gov linkage or the throttle control cable? Kind of strange that it ... | |
| 5hp briggs starving for fuel | 2/26/2010 |
| Q: my 5hp briggs go kart sat up about a year due to a chain and sprocket prob ran fine now went out to ... A: Do you have old fuel in the tank? IF you do drain and fill with fresh fuel from the gas pump. You ... | |
| Snowblower Dies... | 2/25/2010 |
| Q: First off, thanks for taking the time to help! I have a 5 HP White snowblower with a Tecumseh ... A: Do you have fresh fuel from the gas pump? Old fuel will cause the symtoms you describe. You are ... | |
| Cub Cadet rzt 50 stalling | 2/23/2010 |
| Q: Kohler engine, ~100 hours. Starts, runs a few minutes, then stalls. Wait a few minutes, starts, ... A: Have you tampered with the safety interlock system at all? Seat switch perhaps? When the engine ... | |
| govenorlikage | 2/23/2010 |
| Q: torosnowblower,7hpengine,h70-130257j how does the carblinkage and govenor linkage go they got taken ... A: Bev, It is impossible to explain this to you through this forum. Get a Tecumseh Repair Manual that ... | |
| Honda ES6500 generator timing mark alignment | 2/21/2010 |
| Q: Sir, I have a Honda ES6500 generator that is backfiring through the carb %26 will not start. The ... A: I have not personally worked on this engine, I can tell you however in 30 years of wrenching i have ... | |
| remote control | 2/20/2010 |
| Q: I've got a gx610 that I'm putting remote throttle/choke on, the engine has the factory elec start. ... A: Go to helm inc... www.helminc.com and order the shop manual for your specific Honda engine. This ... | |
| CARBS | 2/20/2010 |
| Q: can i put a carb(fixed throttle) that came off a 5hp motor and use it on a 7hp motor and expect it ... A: buy the correct carb... the 5hp carb will not deliver the fuel you need if it is a carb problem. I ... | |
| craftsman snowthrower engine | 2/19/2010 |
| Q: i HAD a craftsman thrower model 536.887993 9 hp dual stage. the engine blew. the service people, ... A: Jeanne, Depending what parts are needed they may still be available through a dealer network. ... | |
| Briggs and Stratton 18 Hp I/C | 2/17/2010 |
| Q: I have a Briggs 18HP I/C Model: 422707 Type: 1263 01 Code:9403095B While mowing a few days back the ... A: Do you have fuel in the fuel tank? Is it good clean fresh fuel? If not drain the fuel tank and fill ... | |
| Toro GTS2 450 Push Mower | 1/6/2010 |
| Q: Yesterday, I bought a Toro GTS2 450 lawn mower at a flea market for $10.00. I could not get it to ... A: Stephen: Look on the body of the lawnmower itself, It should be located between the rear wheels. ... | |
| snowblower has not power | 12/22/2009 |
| Q: I have an old Craftsman snowblower model # 503-690512 with a 7HP Tecumseh engine. Last year I put a ... A: I think you should focus on the governor adjustment and the linkage that leads to it. When you ... | |
| Snowblower will not move. | 12/21/2009 |
| Q: It is a Ariens ST724. Starts okay and runs. Auger propels but not as far as I am concerned, but it ... A: There is a very specific DRIVE cable adjustment procedure to adjust the cable. The friction wheel ... | |
| Snow thrower oil leak | 12/20/2009 |
| Q: I have a Sears snow thrower model 536.918000, and it tends to leak oil near the breather element. I ... A: You could replace the breather, but i think what is happening is the moisture inside the breather is ... | |
| tecumseh 4hp snowblower dies | 12/20/2009 |
| Q: [tecumseh-HS40 55265 B / 922999] ~ [ariens snowblower 0169 02686 001043 ] "Inherited" from old ... A: We better get this problem fixed... lets loosen the gas cap and see if the problem still continues. ... | |
| murray snowblower | 12/19/2009 |
| Q: I have a murray snowblower model# g2914010 and cannot find parts for this machine anywhere. I have ... A: Please tell me where you are located in the USA and I can get you in contact with a distributor. ... | |
| aircap snowchamp 5/20 snowblower shear pins | 12/18/2009 |
| Q: I have an older snow champ 5/20 snow blower. where can i find shear pins for the 8451 model? any ... A: Any large hardware store or power equipment store can get you shear pins. There are many ... | |
| Lawn Boy Lawn Mower doesn't stay running. | 12/17/2009 |
| Q: I have a Lawn Boy Silver Pro Dura Force 6.5 hp lawn mower. model 957417 commercial grade. Every ... A: Make sure you have FRESH fuel in the tank. Fresh fuel means from the pump, not out of the can that ... | |
| HM100 carb vs hm80 carb | 12/15/2009 |
| Q: It appears that a bunch of the Tecumseh carbs are interchangeable between these two engines. Do you ... A: I am looking in my Oregon catalog and don't see the number you indicate listed. (i have a 2009 ... | |
| GGP 173 cc SM 55 | 12/14/2009 |
| Q: I see that Stiga(Husquarna) is equipping some of their snow blowers and other equipment with what ... A: I believe it may be a Loncin engine or even a Zongshen. Both companies have been around and are ... | |
| tescumseh carberator adjustment | 12/12/2009 |
| Q: I have a 10 HP 5000 KW portable generator. It will start but runs very erratically. I had a neighbor ... A: There is a screw on the bottom of the carb. This is your high speed screw. Screw it all the way in ... | |
| wheelhorse 16-38 hxltransmision | 12/11/2009 |
| Q: i have recently bought a wheelhorse mower but the rear wheels appeared to be locked up if i put the ... A: check your brake on the transmission. It may be locked up. It is a round circular disk. Remove the ... | |
| toro s200 modle # 38225 | 12/11/2009 |
| Q: i have this snow blower the card needs to be set i was wondering how to set it because it have no ... A: Start by turning the H and L out by one turn. This will allow the snowblower to be started. Then ... | |
| engine electricity | 12/10/2009 |
| Q: I have a 6.5 hp engine from harbor freight. I've seen minibikes that have lights wired directly to ... A: Do you have a charging coil on the engine? If its an engine with a recoil start then the answer is ... | |
| snowblower | 12/10/2009 |
| Q: I have a craftsman snowblower w/ a snotek B%26S engine last year started backfiring and actually lit ... A: When it quits, check for spark by removing the spark plug. If no spark replace the coil Backfiring ... | |
| Chinese Generator Help | 12/8/2009 |
| Q: A: Take a look at this link... Is this what your generator looks like? I would surmise that this is ... | |
| snowthrower won't start | 12/6/2009 |
| Q: Craftsman snow thrower, model 536.887750. tried to electric start for season. Turned over ... A: When you say frozen, do you mean from the cold weather? Simply move it to a warm area to thaw it ... | |
| Chinese Generator Help | 12/6/2009 |
| Q: It does not idle down or produce electricity. I understand you can't service the inverter so where ... A: I am not familiar with his supplier, but based on that info you gave me know where they are ... | |
| stihl chain saw | 12/5/2009 |
| Q: I have a 051AV chain saw i bought new.saw still runs great after all these years.but now the problem ... A: Tommy, There is a gasket that seperates the halves of this saw. It appears it is leaking. I am ... | |
| Chinese Generator Help | 12/5/2009 |
| Q: It does not idle down or produce electricity. I understand you can't service the inverter so where ... A: I am sorry, I need more information then this, a digital picture of the gen set, the part, how many ... | |
| Chinese Generator Help | 12/4/2009 |
| Q: It does not idle down or produce electricity. I understand you can't service the inverter so where ... A: Please provide me information about the Generator. Can you email me a photograph of the EPA tag. ... | |
| ariens snowthrower | 12/3/2009 |
| Q: I just picked up a used Ariens with a 8 HP Tecsumeh engine, it is a H30 series. Everything runs ... A: John when you move the throttle all the way to slow there should be a electrical connection that ... | |
| small engine problem | 12/2/2009 |
| Q: I am having a problem with two gas leaf blowers both with the same condition. One is a Homelite ... A: It sounds like you have a fuel obstruction and or starvation problem. I would start by cleaning the ... | |
| Dyt4000 18.5 briggs | 12/1/2009 |
| Q: I have a Craftsman DYT4000 (917.2736403) with an 18.5 Briggs and stratton(31P777-0348-E1) The motor ... A: There are no common problems to this engine that I know of. About 7 years ago there was a problem ... | |
| Murray 30" Rider | 11/30/2009 |
| Q: Murray 30" rider mower: Model 309007x8b At the beginning of this year, I thought my lawnmower had a ... A: Check your voltage on your battery. A starter turning but not engaging could be a bad starter or ... | |
| Adding a light to my snowblower | 11/29/2009 |
| Q: I own a MTD Snowblower, model# 317E610E000. Tecumsch # HSS5K50, 67368R. D.O.M. 6144N. I have a ... A: Do you have a light kit on your snowblower? You will need a charging coil on your engine before you ... | |
| Honda GX610 | 11/29/2009 |
| Q: I bought this Honda GX610 brand new. I'm not putting this on a tractor that used to have one like ... A: Garret, I am attaching a link to a parts catalog, which is NOT much help. I am afraid you are ... | |
| Kawasaki 19 hp on zero-turn mower | 11/28/2009 |
| Q: Engine about 2 yrs old, 350 hours. Starts easily, but surged at any speed below full throttle after ... A: Lets systematically troubleshoot this. Loosen fuel cap and see if symptom goes away..if so ... | |
| STIHL 011 | 11/27/2009 |
| Q: I HAVE A STIHL 011 THAT LEAKS GAS INTO THE BAR OIL . I HAVE REPLACED THE GASKET A WEEK AGO. AND THE ... A: Maurice, I apologize for the delay in getting back to you, but I don't have any personal experience ... | |
| Honda GX610 | 11/27/2009 |
| Q: I bought this Honda GX610 brand new. I'm not putting this on a tractor that used to have one like ... A: Garrett, What you are doing is called a "repower" and these can be very hard to do. As you have ... | |
| gasoline leak | 11/26/2009 |
| Q: B&S 12hp model 281707-0412 01 on Craftsman lawnmower. Over few months, engine began running ... A: You are correct it is the carb. Most likely just a dirty inlet needle and seat or slightly worn ... | |
| the wife broke my toro | 11/25/2009 |
| Q: the wife was out riding the tractor (Toro model# 28q777 16 hp ohv) & she thinks "she may of run over ... A: Deryl (and Mrs Deryl) It sounds like something may be rubbing up against the engine pulley. Check ... | |
| Garden tractor will not go forward or backwards | 11/25/2009 |
| Q: My Sears Garden tractor (917.275010) will not go forward or backwards. I heard a scraping noise and ... A: If i understand you correctly, your saying that the belt is intact from the engine to the ... | |
| ball bearing removal | 11/25/2009 |
| Q: i have an ariens 8/24 snowblower model #924026 ,serial #20931 and i am presently changing both belts ... A: Bruce: It sounds like you take very good care of your equipment. Kudos to you, but this is a case ... | |
| Name of engine | 11/24/2009 |
| Q: I recently came into possession of a craftsman 3hp walk behind edger with 9inch blade. I cannot fine ... A: http://www.searspartsdirect.com/partsdirect/getSubComp.pd?modelNumber=536.796521%26productCategoryId ... | |
| oil plug | 11/23/2009 |
| Q: I have inherited a snowflite 8/26 snowblower. At the bottom of the engine there are several bolts on ... A: The oil drain plug is the SQUARE shaped plug located in the Middle between the mounting bolts. Use ... | |
| ariens 2048 mower | 11/22/2009 |
| Q: Greetings.I want to increase my mowing speed by increasing RPM's.Can you tell me how? Thank you,Joe A: Joe, I am sorry to tell you that by increasing your RPM, all that will happen is your engine will ... | |
| Toro Wheel Horse problem | 11/21/2009 |
| Q: I recently acquired a 1994 Toro Wheel Horse 266H, model number 72083. it ran fine at first,but ... A: Pete: Based on this information, I would be looking at the electric clutch unit. Now you said that ... | |
| Toro Wheel Horse problem | 11/21/2009 |
| Q: I recently acquired a 1994 Toro Wheel Horse 266H, model number 72083. it ran fine at first,but ... A: Pete, This is one that makes us scratch our heads With the ignition in the OFF position, Engine ... | |
| Toro Wheel Horse problem | 11/19/2009 |
| Q: I recently acquired a 1994 Toro Wheel Horse 266H, model number 72083. it ran fine at first,but ... A: It sounds like you have an electrical short- or an electrical draw in your wiring system. In a ... | |
| Honda clones | 11/18/2009 |
| Q: I have bought what I call a "Honda clone"last year at Harbor Freight last year and since then have ... A: Dennis, Actually Honda refers to them as HONDA COPY engines. It is a trade dress issue which is a ... | |
| John Deere 160 - No start | 11/17/2009 |
| Q: ...following on a question from someone else to John, 2 years ago... my engine is a 12.5 HP ... A: I think your coil is fine. I say this because you tell me when you spray fluid into the carb you ... | |
| HR215 | 11/16/2009 |
| Q: Sir, The model of my lawn mower is HONDA HR21.5 (There is characters after 5). When I try to pull ... A: Do you have a blade on the bottom of the engine when your trying to pull it over? You have to have ... | |
| oil leaking out of carburetor | 11/16/2009 |
| Q: I have a robin 4cycle motor in my 2000 polaris xc120..runs fine after I turn ogg engine it leaks raw ... A: I am not familiar with the polaris application of this engine, but I would be looking at the ... | |
| 1991 8 HP Snapper mower | 11/15/2009 |
| Q: I am thinking about purchasing a 1991 Snapper mower with a B & S 8 hp engine- The gentleman told me ... A: This is a good product. Check with a snapper dealer in your area as some parts may not be ... | |
| surging 16.5 hp honda engine | 11/14/2009 |
| Q: Same question as a previous one. Craftsman 917.273500 16.5 hp honda engine. surges at all no load ... A: I want you to shorten up the regulating spring. That is the small spring that is on the outside of ... | |
| Briggs Diamond I/C 20hp Timing Procedure | 11/12/2009 |
| Q: This is a Model 460707 type 2278-E1 code 9910205a. I replace a connecting rod and prior to doing ... A: Ed There is a timing mark on the camshaft and the crankshaft. just make sure these are lined up ... | |
| Craftsman Leaf Vac 4.5 HP Tecumseh | 11/12/2009 |
| Q: I recently bought a newer Craftsman Leaf Vac 4.5 HP Tecumseh engine from a neighbor and was told it ... A: Your engine is not getting fuel. This is apparent by the fact it quits running when the starting ... | |
| Kholer wont start or stay running | 11/11/2009 |
| Q: I have a 20 horse twin cylinder kohler motor. It had not been started for about a year in a half. I ... A: You are correct in your analysis of no fuel getting to the carburetor. We need to determine why. ... | |
| Engine removal | 11/9/2009 |
| Q: Bradford tiller model 53493800. B&S engine model 130292. Type 0159. I'd like to remove the engine ... A: The SECOND shaft you are indicating is the camshaft. It is longer so that it allows for the reverse ... | |
| 24HP Honda V-twin engine | 11/9/2009 |
| Q: David: I recently purchased a honda gx670 v twin engine with remote start. My problem is that it ... A: I assume you are trying to replace an engine with this engine correct? I can only surmise that the ... | |
| honda g200 engine | 11/8/2009 |
| Q: I have a 70s honda g200 motor in my go kart. it starts but doesn't stay running. it boggs out. I'm ... A: I am not sure what you mean by "settings" If you have an adjustable carb you can start with the ... | |
| Toro Zmaster 52" midsize frame | 11/8/2009 |
| Q: 19 HP Kawasaki Engine v2 Can I increase the operating RPM safely. (How?) 3600 is the claimed and ... A: Tim: You need to look at the specifications from TORO. I belive you are talking about the engine ... | |
| Honda Lawn Mower Roto Stop Assembly | 11/5/2009 |
| Q: Model HRR2163VXA, purchased in 2007. Roto Stop assembly is stuck with blade engaged. I may try to ... A: Doug, I am afraid I cant even begin to answer this question as I have never personally worked on ... | |
| Kohler K321 won't rev up,idles fine | 11/5/2009 |
| Q: I am working on a Ford 145 Rider with a Kohler 14hp engine. K321AQS, Spec # 60244, Serial # ... A: I would do a valve job as you indicate. When you switched out the carb, did you switch it out with ... | |
| mtd with honda motor | 11/4/2009 |
| Q: ive got a mtd/yardman with a honda motor. the number on the motor is 1p70fua0608072a0082. it wont ... A: Bill If you go to any MTD dealer they can get your parts for this mower. As long as you have spark ... | |
| mtd with honda motor | 11/3/2009 |
| Q: ive got a mtd/yardman with a honda motor. the number on the motor is 1p70fua0608072a0082. it wont ... A: The compression is correct for your engine. Your engine is equipped with a mechanical compression ... | |
| small engine carb. | 10/11/2009 |
| Q: I just bought an older rebuilt Tecumseh vertical carburetor 4.0 HP/Craftsman. I want to install it ... A: Tom That is a vent. You can not plug it off. You can however take a piece of small fuel line about ... | |
| starten problem | 10/10/2009 |
| Q: i got a old briggs an straton 8hp an some times it dont want to start but after i fiddle around with ... A: I believe you have a dirty carb, but the source is before the carb. I suggest you clean your fuel ... | |
| 2005 JD 180...Hydro problem | 10/9/2009 |
| Q: I have a John Deere 180 tractor; has been a great tractor i have 500hrs on it with very little ... A: What condition is your drive belt in? a bad drive belt will give you the symptoms you describe. ... | |
| small engine carb. | 10/9/2009 |
| Q: I just bought an older rebuilt Tecumseh vertical carburetor 4.0 HP/Craftsman. I want to install it ... A: without seeing a picture of your carb, I think your referring to an external vent. The problem your ... | |
| Stil Leafblower | 10/8/2009 |
| Q: I have a Stil leafblower that is hard to start. What I have done to check problem is removing the ... A: If it runs great without the muffler, but you have difficulty with the muffler on it, I would look ... | |
| Mccullough chain saw/chain removal | 10/8/2009 |
| Q: I have a Mccullough saw model SE2016S - Silver eagle. I've had other Mccullough saws before. This ... A: To remove the chan, first you must DE-ACTIVATE the chain brake if so equipped by pulling the ... | |
| John Deere 747 (zero turn) 06 model | 10/6/2009 |
| Q: In the past few years, the main fuse (30amp) under the seat would occasionally blow. Well just today ... A: I am unaware of any bulletins, you need to start tracing the wires from the seat throughout the ... | |
| briggs 5 hp flathead | 10/6/2009 |
| Q: i have a 5 hp flathead and i took off my 5 horse flywheel and put a 3 horse on it and made a bracket ... A: WOW.... what a project! in theory you should have spark, but weather its introduced at the proper ... | |
| hondagxv530cc | 10/5/2009 |
| Q: I have a 2005 lawnboy zero turn mower with a honda gxv 530cc engine that pulsates when the blade is ... A: when u mean pulsate,do you mean hunts and surges? meaning the engine revs up and down not ... | |
| HUSQVARNA 2148 WON'E SATY RUNNING | 10/4/2009 |
| Q: WHEN I CRANK THE MOWER UP I HAVE TO CHOKE IT AND THEN IT RUNS FOR ABOUT 30 SECONDS AND DIES .I CHECK ... A: Danny How fresh is your fuel that is in the tank? Will it continue to run with the choke pulled ... | |
| safety | 10/2/2009 |
| Q: how do you ground the spark plug wire for safety when working on engine A: Forgive my delay in getting this answer to you, I wanted to make a video for you as this is a very ... | |
| craftsman lawn tractor | 10/1/2009 |
| Q: My lawn guy stood my craftsman lawn tractor up to change the blades. I think most of the trasaxle ... A: These transaxles are sealed and should not need to be serviced I found out after much searching ... | |
| Kohler Courage SV470-610 | 10/1/2009 |
| Q: Troybilt riding mower with Kohler Courage engine will start but dies after about 30 seconds. Does ... A: Chuck it sounds like you have a fuel starvation of some sort. Try it with the choke on part ... | |
| Mclane 3.5hp edger | 9/30/2009 |
| Q: I have a Mclane 3.5hp edger and it froze. I was edgin my lawn just fine when it started to lose ... A: It most likely can be fixed, but the cost of repairs will exceed the value of the engine. IF you do ... | |
| Carberator problem | 9/29/2009 |
| Q: i have a Gravely Professional 14G that will only run on full choke. Even then it will often stop ... A: DAvid you ahve not told me the MAKE or the model numbers of the engine. I am assuming your talking ... | |
| changing engines | 9/28/2009 |
| Q: my brother had a 14.5 hp briggs and stratton engine that he put on a huskee body.the engine was ... A: Yellow wire from where? IS it coming off the engine or the tractor wiring harness? Is there a ... | |
| starting my generac pressure washer | 9/27/2009 |
| Q: I left my generac pressure washer (sprint 375) in storage for about two years. Today it would not ... A: Pam: I think the carb is most likely gummed up from sitting. The only way to repair this is to ... | |
| honda generator | 9/27/2009 |
| Q: david- i pull out the choke and the engine starts right up. the i push the choke in and the engine ... A: First off how fresh is the gasoline that is in the fuel tank of the generator? The choke is most ... | |
| Lawnflite 604 | 9/18/2009 |
| Q: I have a lawnflite 604 sit on mower that is cutting out after a few minutes. I strta to cut the ... A: Since you did not give me the MODEL, TYPE and CODE i dont know if the engine has points ignition or ... | |
| rebuid specs | 9/17/2009 |
| Q: where to get rebuild specs for b&d model 445677-0413-e1 cant find info anywhere A: Here you go.... Everything you ever wanted to know about your engine.... If you dont want to buy ... | |
| STX38 Governor | 9/15/2009 |
| Q: I have a STX38 13hp black deck that was running fine. The other day I was coring the lawn and ... A: The engine needs to be completely disassembled and the gov gear replaced. BUT we need to find out ... | |
| brake adjustment | 9/12/2009 |
| Q: how do i adjust the brakes on a 1994 john deere lx172? A: brakes are normally adjusted on the transmission. I speculate you need new brake pads if its that ... | |
| Unknown engine brand of new craftsman snowthrower. | 9/11/2009 |
| Q: I recently purchased a new professional series Craftsman snow thrower.(model 88830) I like the ... A: I would need to see a picture of the engine to tell you who the exact engine manufacturer is. I ... | |
| craftsman lt1000 riding mower-hydrostatic movement | 9/9/2009 |
| Q: after cutting the grass, i pulled the pull handle on the back of the mower to disengage as to push ... A: Jim, I dont think you broke any gears. All the moving of this lever does is allow the fluid to ... | |
| Starting problem JD ride on | 9/8/2009 |
| Q: Have a John Deere 1971 Model 112 with coil and points ride on tractor that will only run when you ... A: Does this have a Kohler or a Briggs and Stratton Engine on it? I would say you have a safety switch ... | |
| Eaton scooter cdi | 9/7/2009 |
| Q: Hey David. I'm looking for a cdi for an Eton Beamer 3 scooter; 49cc 2 stroke. I believe the Kymco ... A: Tim: Somewhere on that scooter will be markings of the manufacture. Someone is building this ... | |
| homemade gokart | 9/6/2009 |
| Q: what kind of engine wold be beat fore a home made go cart, lawn mower, snow blower ect please give 3 ... A: Ted, you will need a horizontal shaft engine. A snowblower engine is not a good suggestion because ... | |
| Toro Lawn Mower Self Propelled Will Not Start! | 9/6/2009 |
| Q: Hey David! I have a 2002 22" Toro Recycler Lawnmower (Model #20018) with a Tecumseh engine. I just ... A: If I understand your question clearly you can start the mower with the recoil start but not with the ... | |
| Replacement engine choices | 9/4/2009 |
| Q: I have a Craftsman LT1000 riding mower model # 917.272751 18hp 42" cut. It has (or had) a Briggs and ... A: Paul, I am not a big supporter of changing engine suppliers on an application like this. (REMEMBER ... | |
| pull start on honda gx120 | 9/3/2009 |
| Q: I have a greens mower with a GX120. When i pull the pull start to try and crank the engine, and it ... A: Hey Mike, I need some clarification, I think what your telling me is when you unbolt the rewind ... | |
| honda 4518 mower | 9/3/2009 |
| Q: question is no fire either plug cant find motor numbers,cant find any parts look up,possible ... A: Go to your nearest Honda dealer and give them the info you gave me...4518, they should be able to ... | |
| 17.5 B&S OHV engine | 9/2/2009 |
| Q: Here is the deal, I have put this thing back together due to it having a bad fuel solenoid. I can ... A: Do you have the valves adjusted properly, this is the first place i would be looking. It appears ... | |
| Carburetor for a tiller eng. Mod# 143-7060 12 | 9/1/2009 |
| Q: Recently I purchased a tiller engine from E-bay I knew it did not have a carburetor. However, I ... A: Hey John, I just checked with my Tecumseh Supplier and the carb number I gave you is available ... | |
| SEARS RIDING LAWN MOWER | 8/31/2009 |
| Q: HOW DO YOU TEST FOR FUEL GOING TO PLUG THEN HOW DO YOU MAKE A COMPRESSION TEST ON SEARS MODEL ... A: To check for fuel you need to crank the engine over a few times and remove the spark plug and look ... | |
| Snapper Rear engine mower will not start | 8/30/2009 |
| Q: I have a 2002 snapper 281123bve rear engine mower with an 11 hp Briggs and Straton engine. After ... A: I am assuming some oil got into the cylinder and the plug is covered in oil. Remove the spark plug, ... | |
| Ardisam Earthquake MC43E Caught on fire | 8/29/2009 |
| Q: I have an Earthquake MC43E that I purchased about two months ago from one of those "big box stores" ... A: Paul: I would suggest you call the company at 800-345-6007 or try www.getearthquake.com for a ... | |
| briggs and stratton | 8/29/2009 |
| Q: My Granddad/ acting father that has gone on to a better place worked on mowers his whole life. I ... A: I am not sure what he may have soaked them in, some people have used a product called XYLOL many ... | |
| Self Starter Lawn Mower won't work | 8/28/2009 |
| Q: Self Starter Lawn Mower won't work Hi, I have a 5 year old lawn mower, Troy bilt, self starter, ... A: I see two different issues here. One, the engine will not keep running Two, The mower is ... | |
| Self Starter Lawn Mower won't work | 8/27/2009 |
| Q: Self Starter Lawn Mower won't work Hi, I have a 5 year old lawn mower, Troy bilt, self starter, ... A: Tom: I am a bit confused by your question (s): When you say "self starter" do you mean the ... | |
| craftsman mower quits | 8/26/2009 |
| Q: We have a craftsman mower with a Briggs and Stratton 21 OHV twin that quits running after 15-20 ... A: When the mower quits, quickly check for spark to see if the engine has spark. IF it has no spark, I ... | |
| john deere gx345 fuel pump | 8/25/2009 |
| Q: ,, I have a jd gx345 w/ a 20hp kaw engine.... It has been a very good mower for me.... I noticed a ... A: By plunger I am assuming you mean the plunger that rubs up against the camshaft? I would ask the ... | |
| putting a briggs an stratton 12.5 on a john deere 111 | 8/24/2009 |
| Q: i took the engine off today and want t know if the 12.5 Briggs will be capable of using the fuel ... A: Jeff: I am really confused here. I think you have a typo. If your asking can you use the fuel ... | |
| Instruction for changing the lower drive belt on a 46 inch cut 23 HP B&S Huskee Supreme | 8/24/2009 |
| Q: David will you please give me step by step instructions for changing the lower drive belt on a 23 HP ... A: James: I Do NOT recommend you do this belt change unless you are equipped with the proper lift ... | |
| Loncin Engine Quality | 8/23/2009 |
| Q: We are looking at a replacement engine for our ride on after our current B&S 11.5HP engine recently ... A: LONCIN is TOP QUALITY! I give it a PERFECT SCORE!!!! You will not go wrong with a Loncin Engine. I ... | |
| Small engine for an edger | 8/23/2009 |
| Q: I have an older McLane edger with a 3 HP Briggs which has died. I am considering the "Greyhound" ... A: I looked at one of these edgers yesterday. The engine should bolt right on as it is what is ... | |
| Motor will not stay running | 8/22/2009 |
| Q: WI; I have a Generic Generator. It is about 20 some years old I will send along a pdf file of the ... A: Always great to hear from a fellow Cheesehead! (I'm from WI Dells) There are two things that I ... | |
| govenor | 8/21/2009 |
| Q: 22" Weed Eater Q4.75 model 961140004 01. The governor is on what I call is wide open with no ... A: Please get me the model type and Code number that is on the engine so i can get a look of the gov ... | |
| 12HP Tecumseh vertical lawn tractor engine | 8/21/2009 |
| Q: What is the proper procedure for adusting the rockers in a used 12HP Tecumseh vertical lawn tractor ... A: Carol, This question is to vague to answer. You dont adjust the rocker arms you adjust the valves. ... | |
| B&S throttle linkage question | 8/19/2009 |
| Q: I have a Snapper Ninja push mower and the throttle linkage isn't set up right. Someone has had it ... A: I need a little time to get this info for you. I believe that I can get a photograph for you. ... | |
| lawnmower parts | 8/19/2009 |
| Q: Looking to purchase the rear wheels for a lawnmower purchased from Montgomery Wards. Model ... A: If you go to your local lawn mower service dealer he can help you find the part numbers you need. I ... | |
| Honda Lawn mower drivew cable | 8/18/2009 |
| Q: The cable that engages the drive wheels broke on my Honda Harmony II HRT216 KTDA. I am having ... A: Brian, I am afraid I do not have any personal experience with this mower. I tried to find a manual ... | |
| Intermittent vibration briggs v-twin | 8/18/2009 |
| Q: Bought a Craftsman riding lawnmower on June 27/2009.24 horsepower Briggs and Stratton v-twin. Model ... A: I am not familiar with his exact problem you describe, but briggs did have a problem with some ... | |
| mower is over reving | 8/17/2009 |
| Q: I have a craftsman 42" mower with a 15.5 Briggs motor. the motor started revving at full speed. the ... A: It sounds like your plastic gov gear inside the engine is broken. You will need to remove the ... | |
| Loud lawnmower engine | 8/16/2009 |
| Q: Initial problem was loud noise and engine shut off on Craftsman riding lawnmower. I went out to ... A: Timing marks on camshaft and crankshaft should be lined up, NONE run one tooth ahead as you asked. ... | |
| push mower | 8/15/2009 |
| Q: i have a 6.5 hp Briggs and Stratton white outdoors LC 215 push mower and its extremely hard to start ... A: If you take a compression gauge you should have anywhere from 45-60psi for starting. I am wondering ... | |
| Briggs centrifical governor | 8/14/2009 |
| Q: My governor on my 5.75 Briggs Murray 22 inch mower seems to be stuck inside. How do I get inside to ... A: The Gov gear inside your engine is a plastic gear. I have never seen them stick inside of the ... | |
| Mower Hit Curb | 8/13/2009 |
| Q: My Sears mower with a Briggs 122T00 (6.25 engine) hit the curb recently. The blade grabbed the ... A: Is your gasoline fresh from the pump? Make sure that the crossover pipe that the carb bolts onto ... | |
| 10hp Tecumseh Generator | 8/13/2009 |
| Q: it starts real easy,but runs very rough,and back fires ,pops ,we need help A: Has it sat in storage a long time? I speculate that the carb is gummed up. Take it apart clean it ... | |
| Line trimmer engine problem | 8/11/2009 |
| Q: I have a Roybi model BC30 line trimmer. The problem I'm having is that after starting it and ... A: Look Closely at your muffler, there is a spark arrester screen that is held in with a screw near the ... | |
| weed wacker issues | 8/10/2009 |
| Q: have 3 different brands that have same issue: When you pull on the cord to start the gas machine, ... A: are these units clutch driven? If they are direct drive when you go to start them are they on the ... | |
| case lawn tractor 444 | 8/9/2009 |
| Q: I inherited a case lawn tractor (Model 444, PIN #14059231) with a Kohler 14 HP engine (SPEC # 60410, ... A: This is an oldie, but goodie, Start with your points and condenser and make sure you have a good ... | |
| boleb bl100 | 8/8/2009 |
| Q: have new head put plug cord on unit have to remove spark plug to get engine to turn over .put plug ... A: I am sorry I dont know what a "BOLEB BL100" is? Do you have a typo perhaps? I am assuming you have ... | |
| blue smoke and oil in air cleaner assembly | 8/8/2009 |
| Q: the engine is blowing blue smoke and has quite a bit of oil in the air cleaner housing. it also runs ... A: Craig: Are you using SAE 30 oil in the engine? Is the engine overfilled with oil? How many hours ... | |
| installing new transaxle | 8/7/2009 |
| Q: i have a murry tractor model 425000x8a with a mst 206-502c transaxle in it can i used a mst 206-502c ... A: Are the shafts the same length on both trannies? If so there should not be a problem. If I ... | |
| Toro Smoker | 8/6/2009 |
| Q: I have a 3-yr old Toro SR-4 Super Recycler walk-behind mower Model 20056 that has given me good ... A: The chances of Toro giving you a new mower are pretty slim, Briggs and Stratton has a policy in ... | |
| Honda 16.5 HP engine surges | 8/5/2009 |
| Q: I have a Sears lawn tractor with Honda 16.5 HP v-twin engine(model #GXV 530-EXA1) It just recently ... A: It appears you have a fuel system restriction or very old poor fuel.. It sounds like your high speed ... | |
| Onan Carburetor troubles | 8/4/2009 |
| Q: I have a Onan 18 Hp aseries 48 engine that I rebuilt the card on about a month ago. Used Onan ... A: Lets rule out a vacuum leak or fuel pump problem. Take a small fuel tank and hook a hose directly ... | |
| westwood s800 | 8/2/2009 |
| Q: i have a WestWood S800 ride on mower. but i need to test a safety switch, someone said about ... A: Get yourself (borrow) a continuity tester to test the switch. Every switch is a little different. ... | |
| converting points to magnatron | 8/1/2009 |
| Q: I have a Briggs 243000 mod engine. It had the points & condenser ignition. The points plunger seal ... A: when you say you get very little spark, what is meaning of this? as a general rule of thumb, if you ... | |
| craftsman riding mower | 7/30/2009 |
| Q: I am having trouble with a craftsman 19.5 horse briggs v twin 42" cut riding mower. Model ... A: I know you said you put a new air filter on, but for testing purposes ONLY, please remove the air ... | |
| Mcculloch 99 Chainsaw | 7/30/2009 |
| Q: Have an McCulloch model 99 old saw would any idea of how old it migth be ,many thanks for any help A: Chris, I am not able to even give you an educated guess. 4 cycle is my strong area. I would ... | |
| Kawasaki FJ180v Valve clearance | 7/29/2009 |
| Q: Got a Cub cadel mower with a Kawasaki FJ180V-BS04-R engine. Can you tell me the valve clearance for ... A: Tony You are going to have to call a Cud Cadet dealer or go to www.mtdproducts.com with your MODEL ... | |
| 2006 Mitsubishi 6hp 188cc simonize power washer | 7/28/2009 |
| Q: I have a 6hp motor its got about 35 psi compression and it leaked gas out of a hole in the top of ... A: Your compression should be fine to get the engine started. Remember that this engine has a ... | |
| govenor spring assembly model 40777 | 7/28/2009 |
| Q: Its a 19 hp briggs and stratton. I have an issue when i start mower hangs wide open. Enough so if ... A: Kathy, I am afraid I have some very bad news for you. I dont think it is the gov spring, but the ... | |
| Carberator | 7/27/2009 |
| Q: I have a model 351777 19.5 hp there is 2 ports for gas lines but only inlet for gas the larger port ... A: There should be three barbs on your fuel pump. Fuel Tank to Fuel Pump Fuel Pump to Carb Vacuum ... | |
| brigg engine no start | 7/26/2009 |
| Q: i have a troy bilt 20 hp rider it has new plugs new fuel filter new air cleaner and pre filter it ... A: Take a compression reading, You have ignition (spark) and you tell me the fuel pump is good, so i ... | |
| solenoid and starter | 7/26/2009 |
| Q: working on john deere LA115 lawn tractor. At first when i touched the hot cable from the battery ... A: Bill, I dont remember this question, and reading through my answered questions cant find out more ... | |
| cant shut off my mtd lawn tractor w key | 7/24/2009 |
| Q: I recebtly bought a basket case lawn tractor. I got it running but the only problem is I can shut it ... A: If you do not have a wire hooked to the magneto, then this is why you can not turn the engine off. ... | |
| cant shut off my mtd lawn tractor w key | 7/24/2009 |
| Q: I recebtly bought a basket case lawn tractor. I got it running but the only problem is I can shut it ... A: You say engine will run correct? While the engine is running take the black wire that is coming ... | |
| j d 116 riding mower | 7/23/2009 |
| Q: when i engage the pto to turn on blades the mower dies, is this some kind of safety relay defective ... A: Yes, It sounds like your SEAT safety switch may be bad or your PTO switch may be bad. Make sure the ... | |
| Craftsman 16.5 HP B&S lawn tractor model # 917.271634 s/n 080701D016693 backfires and won't start | 7/23/2009 |
| Q: My lawn tractor has been running ruff the last two or three times I have moved the grass. I checked ... A: take a look at your fuel shutoff solenoid located on the bottom of the carburetor. Touch it, does ... | |
| 6.5 hp ohv intek lawn mower don't start | 7/22/2009 |
| Q: i have checked the air filter and it is cleaned, it is full of fuel, and oil, the spark plug has a ... A: Jimmy, Spray a little bit of carb cleaner or Flammable WD40 into the carb and then see if it ... | |
| Craftman Tractor cuts out | 7/21/2009 |
| Q: I have a Craftsman model 917.273143 42" deck 17 HP Kohler engine. We have to jumpstart the tractor ... A: Ted You obviously have a battery drain problem. To confirm this recharge the battery fully. Put ... | |
| Head Gasket repair for non starting engine | 7/21/2009 |
| Q: I have a John Deere STX46 with a Kohler Command 14 Model CV14S Spec #1463 Family SKH398U1G2RB. One ... A: The engine will not start with a blown head gasket. Take a compression test and I think you find ... | |
| Huskee lawn mower steering shaft | 7/20/2009 |
| Q: How do I change the steering shaft on my Huskee mower, model #407777, serial number 030116Y6 part ... A: You need to remove your deck from your tractor. (NOT FUN) You need to turn your wheels either all ... | |
| compression etc | 7/19/2009 |
| Q: General questions that shouldn't require model#s--I have a briggs 3 hp with compression psi of 35 ... A: Question#1 35psi should be enough to start the engine as that is the compression reading during ... | |
| john deere vtwin 25hp mower | 7/19/2009 |
| Q: as soon as i engage the clutch the engine shuts down A: Sorry to hear your having problems, When you say "engage the clutch" please tell me which clutch ... | |
| part number or where to buy part | 7/18/2009 |
| Q: I have an old Murray 20" 3.5hp Classic lawn mower with a cracked metal gas tank. It has a Briggs & ... A: I am sorry to say it appears you gave me the Emissions label off the engine. Look above the spark ... | |
| lawn mower smokes | 7/18/2009 |
| Q: David i have a craftsman 6.75 hp Briggs self propelled mower.when i start it up a puff of smoke ... A: John, I believe what your experiencing is nothing more then a little bit of oil drain back that ... | |
| starting an unfrozen motor | 7/17/2009 |
| Q: I have a power washer and ran low on oil. The motor started briefly several times then froze up. I ... A: Pull the spark plug out and make sure it is clean. Sometimes oil will gather between the tip and ... | |
| Huskee lawn mower steering shaft | 7/17/2009 |
| Q: How do I change the steering shaft on my Huskee mower, model #407777, serial number 030116Y6 part ... A: John Please give me the model number and serial of the tractor. You have a MTD product. The model ... | |
| GX200 Carb | 7/16/2009 |
| Q: After the GX200 Engine is not is use for several months it will not start. Is it possible the needle ... A: Before we start on the carb, is this a Generator application? OR is it an application that has a ... | |
| Craftsman 2.6 cu. in.gasoline chain saw | 7/16/2009 |
| Q: Bought new 5 yrs. ago. Tried to start but would'nt. Primed again and noticed fuel running all over. ... A: IT sounds like you have the lines attached correctly, but may also have rubber parts that have ... | |
| John Deere engine hard to start, or starts then stops | 7/15/2009 |
| Q: I have a three-year old John Deere Walkbehind lawn mower JS20 that uses Briggs Stratton engine ... A: I believe you have a bent crankshaft by the description of symptoms your giving me. Remove the ... | |
| JD 345 engine | 7/13/2009 |
| Q: I am having some carburetor and coolant leaking problems with my FD590V Kaw. engine on my John Deere ... A: Tom: I take it your approaching the 1100 hour mark on your engine is that correct? Its a piece of ... | |
| 5 HP Honda won't idle | 7/12/2009 |
| Q: I have a 5 HP Honda horiz. shaft motor that, after 2 years, quit idling. I put on a new carb and it ... A: Where did you get the new carb from? Was it a Honda OEM carb, an aftermarket carb, or a different ... | |
| snapper rider | 7/12/2009 |
| Q: when turning the key on snapper I get nothing I have noticed last year when turning it took several ... A: It could be a safety switch issue, I would trouble shoot it the following way: Check the battery ... | |
| changing diameter on 18 hp kohler | 7/11/2009 |
| Q: we have an 18 hp K+:"23 Command need it to replace a blown Briggs on our mower.The shaft on the ... A: Jane I suppose anything is possible, but it would have to be disassembled completely and put in a ... | |
| JD/Champion | 7/11/2009 |
| Q: Is JD and Champion one and the same? It has been stated that Champion is American owned. Are the CPE ... A: Okay, now we are on the same page here...I will answer your questions again. "Are most of the GX200 ... | |
| JD/Champion | 7/10/2009 |
| Q: Is JD and Champion one and the same? It has been stated that Champion is American owned. Are the CPE ... A: Floyd, I take it your asking me is John Deere and Champion the same company correct? If your ... | |
| Problem with idling on a go kart i just bought | 7/10/2009 |
| Q: We just bought a go kart for the kids today! Anyhow it was stolen out of his yard last week before ... A: Heather: Lucky Kids! On the carburetor there is a screw on top of the carb that simple needs to be ... | |
| dixie chopper mower problem | 7/10/2009 |
| Q: battery keeps going dead. installed new battery last week and already dead. tried mowing tonight and ... A: If your new battery is good and not defective, I would say you have a charging system ... | |
| john deere 160 pto | 7/9/2009 |
| Q: The PTO on my John Deere 160 disengages after running for about 20 minutes and will not re-engage. ... A: Taking an educated guess here, I would say you have a circuit breaker that is "popping" Before you ... | |
| Sputtering and stalling problem | 7/9/2009 |
| Q: I have a Scotts Riding Lawn Mower [Model #S1742] with a 17HP Briggs and Stratton Intek engine. It ... A: Great keep me informed. When I test engines i sometimes test them with 110 octane AV Gas.. ... | |
| Craftsman Pressure Washer 6.75 mrs | 7/8/2009 |
| Q: I have a craftsman pressure washer with a b&s 6.75 mrs that will not start. I have tried ... A: You have a carb problem. You determined that by putting fuel in the carb and starting the engine ... | |
| Sputtering and stalling problem | 7/8/2009 |
| Q: I have a Scotts Riding Lawn Mower [Model #S1742] with a 17HP Briggs and Stratton Intek engine. It ... A: Henry: How old is your fuel? It sounds like you may have a vapor locking issue going on here. ... | |
| Briggs & Stratton 16 hp twin won't start | 7/7/2009 |
| Q: Briggs & Stratton Model 402707 Type 1205-01 1: It turns over good 2: new magneto and plugs(great ... A: Sounds like something is goofed up with the timing. Did the flywheel key shear part way some how? ... | |
| engine problem with Murray 22" lawn mower | 7/6/2009 |
| Q: I have a Murray 22" side discharge mower where the engine keep revving up and down, up and down ... A: the condition you describe is known as "hunting and surging" It is most likely your carb. Make ... | |
| no spark | 7/6/2009 |
| Q: iv been working my rototiller for awwile, and i have no spark, i no quite abit about motors but i ... A: Disconnect your ground wire from the coil. Test and see if you have spark. If you do you have a ... | |
| Briggs and Stratton kick-back | 7/5/2009 |
| Q: I have a 3.0 Briggs&Stratton mower. When I pull it to start it it kicks back hard. Pulled the ... A: Well there is a technical answer and the I have been doing this for many years answer...I will give ... | |
| lawn mower smokes | 7/4/2009 |
| Q: Dave, i have a sears craftsman 6.5 hp Briggs engine, self propelled mower.when i first start it a ... A: Let me address the weed whacker issue first: SHINDAIWA is my number one choice when it comes to ... | |
| Briggs and Stratton kick-back | 7/4/2009 |
| Q: I have a 3.0 Briggs&Stratton mower. When I pull it to start it it kicks back hard. Pulled the ... A: David: Is your blade attached while your trying to start this engine? The blade has to be attached ... | |
| Tecumseh Engine | 7/3/2009 |
| Q: This is the first time I have bought an outboard motor. I have an old outboard motor that I am ... A: I can not answer this question personally, but I can direct you to someone who can answer the ... | |
| craftsman mower will start and then dies | 7/1/2009 |
| Q: this is a 6.0 horsepower, 21" multi-cut rotary lawn mower. model # 917.388720, serial # ... A: you have either a plugged main nozzle or old fuel in your system. If you know you have fresh fuel, ... | |
| Carburetor does not adjust | 7/1/2009 |
| Q: My mower quit the other day. I believed that it was b/c it was not getting gas. I took apart the ... A: I am not sure i understand you question. Are you saying that the engine will not speed up? or are ... | |
| swisher predator 24 | 6/30/2009 |
| Q: David, i'd like to know what you think of the swisher model wb11524 brush mower with a briggs and ... A: Without the exact model type and code number i cant answer this, however some Inteks did offer this ... | |
| swisher predator 24" roughcut brush mower | 6/30/2009 |
| Q: David, i'd like to know what you think of the swisher model wb11524 brush mower with a briggs and ... A: John: Both Swisher and Briggs have been around for a long time. I have some experience with this ... | |
| 18.5 B&S heavy oil smoking | 6/29/2009 |
| Q: I have a Briggs & Stratton 18.5 OHV 31P777-0348-E1 that since new has blown heavy smoke if turned ... A: How new is new? IT sounds like you could have a valve seal out, a leaky head gasket, (your not ... | |
| changing engines | 6/28/2009 |
| Q: I just bought a craftsman GT5000 tractor It don't have a engine, it says 25hp 48in cut on the ... A: Rusty: First we need to find out what kind of engine was originally in the tractor. Once you get ... | |
| Model Numbers | 6/28/2009 |
| Q: I just bought a used Snapper rear engine riding mower and i cannot find the model number or the ... A: If you looking for model number on the mower its usually located on the frame near the wheels. It ... | |
| Popping noise in riding lawn mower | 6/27/2009 |
| Q: I have a sears riding lawn approx 2 years old, 24 HP twin engine. All of sudden it started making ... A: Jim: Lets isolate the engine from the application. There will be either a BLACK or GRAY wire from ... | |
| rx75 stalls after 20 minutes of running | 6/27/2009 |
| Q: I have an rx 75 J.D. that runs well for about 20 minutes then shuts down. Eventually it will ... A: Mark: I am not sure what john has told you, but if I was trouble shooting this, the first thing I ... | |
| starting problems john deer stx38 | 6/1/2009 |
| Q: I started having a few problems with my tractor. It would runs great then all of a sudden just die, ... A: It sounds like you have an interlock system short. These are those lil safety switches that can ... | |
| Engine swap out | 6/1/2009 |
| Q: David, I bought a used Craftsman DLT 3000 mower for $150 that has a blown motor (turns out the ... A: Neil: The bolt up should be the same. Make sure that the crankshaft length is the same. The ... | |
| Craftwman Lawnmower fuel valve repair | 5/4/2009 |
| Q: I accidentally knocked the little plastic fuel valve on/off lever switch from the Craftsman 5.5 HP ... A: http://www.searspartsdirect.com/partsdirect/getSubComp.pd?modelNumber=917388880&productCategoryId=15 ... | |
| Lawnboy 10323 2cycle Lawn Mower Starting | 5/2/2009 |
| Q: The lawn mower starts but after the gas that was forced into the carb from the primer burns it quits ... A: your carb pickup tube or inlet jet is obstructed. You will need to disassemble the carb and clean it ... | |
| Kohler 26 HP V-Twin | 5/2/2009 |
| Q: I have a Kohler 26HP on my lawnmower and for some reason it seems to run really rough. It pops and ... A: Lets check both cylinders one by one Step one: With the engine turned off pull off one spark wire, ... | |
| Simplicity model 5212.5 engine troubles | 5/2/2009 |
| Q: The engine starts fine, when cold, does not start when hot, does not idle well and when running (ie ... A: The shutoff needle could be bad, but its more likely that you have dirt on the tip of it. This does ... | |
| Sear Riding lawnmower | 5/1/2009 |
| Q: When I try to dis-engage the blade it does not work and I have the blade running at all times. What ... A: Did you recently replace the blade drive belt. IT sounds like you have the wrong belt or the wrong ... | |
| Ariens emperor riding mower | 5/1/2009 |
| Q: I have an Ariens emperor riding mower. MOD# 3970 Se#000303 I am looking for a replacement engine. ... A: If your mechanically inclined you can prob find an engine to fit. Go online and do a search for ... | |
| JD325 | 5/1/2009 |
| Q: I have an JD 325 FH531V. It will turn over but won't crank. New sprk plgs and ignition coil,Got ... A: if it will run when you spray gas into the carb this tells you that the carb is not getting fuel ... | |
| smokes on start up | 5/1/2009 |
| Q: Dave I have a 2008 dixon ztr with a kohler command pro 20 .Ever since I bought it it has smoked on ... A: yes, I do remember vaugely kohler having some sort of a problem with smoking at startup. This has ... | |
| Honda HT 3813 starting issues | 4/30/2009 |
| Q: I have a Honda HT 3813 tractor that I have used several times already this year with no issues. Last ... A: Eric: I am sorry but I cant even begin to help you with this as I have never even laid eyes on one. ... | |
| sears tiller squeal | 4/30/2009 |
| Q: I have an old sears front tine tiller model 917.297550, 5 hp engine. I recently replace the belt ... A: That god awful squealing sound that your hearing is coming from a belt sliding across the pulley. ... | |
| sears 502.255791 lawn tractor | 4/30/2009 |
| Q: I am looking for the stackup of the front wheel washer assembly. I just replaced the plastic inserts ... A: Take a look at this diagram. You can order parts directly from them as well. I hope this helps. ... | |
| new Honda Gehl2500gx670 retro fit engine | 4/30/2009 |
| Q: how do I identify the "kill" switch wire, is it the white w/blue stripes and brown lines ? or what ... A: There should be a place on the engine that you attach a ground (kill) wire to. Check your owners ... | |
| 20hp Honda engine kills after 20mins of running | 4/29/2009 |
| Q: I have a 20hp honda gx620 I. It is mounted in the back of a van to power a truck-mount carpet ... A: There is a yellow wire coming out from the inside of the engine. This is your oil sensor. Unplug ... | |
| 5hp.Briggs & Stratton engine | 4/29/2009 |
| Q: The Motor is fine but can't get it started,though it ran for 1 second and thats it.I need to Know ... A: David, See pasted info below. Sorry to have to do this but this is peak season for me and this is a ... | |
| Craftsman Rider Loose Belt | 4/29/2009 |
| Q: I have a Sears Rider Model # 917.270851; 20.5 HP Briggs; 42” Deck; 6 Speed Transaxle Manual. The ... A: It does sound like you have a problem in the transaxle itself. Perhaps a few broken teeth on one of ... | |
| Simplicity model 5212.5 engine troubles | 4/29/2009 |
| Q: The engine starts fine, when cold, does not start when hot, does not idle well and when running (ie ... A: Patrick, IT sounds like you may have a couple of things going on here. Do you have a clean air ... | |
| 12.5 HP 40 in Murray | 4/29/2009 |
| Q: I have a 12.5 / 40" Murray and the model number on the back plate is 40702x92B. I have a good ... A: there are a few more switches in addition to the seat switch that you need to check. There is one ... | |
| Fuel pump | 4/28/2009 |
| Q: me again (10 or 12hp Kohler). I got the engine but now there is a problem with the fuel pump. The ... A: you can put an electric fuel pump on yes, I am unable to give you any psi suggestions, ... | |
| Ariens Snoblower | 4/28/2009 |
| Q: Ariens ST724 I started (manual start) the snowblower to empty the gas out for the season. The ... A: You pulley could be a little corroded, there is an impeller cable attachment that you can adjust ... | |
| Briggs & Stratton 12.5 Twin runs rough | 4/28/2009 |
| Q: I have a Briggs 404437-0113-01 12.5 HP twin that runs very rough, RPM up and down. I have tried ... A: I need a little bit more information, When you say Engine is running up and down, in the OPEC ... | |
| B&S engine won't start | 4/28/2009 |
| Q: B&S model 130292, Type 0159. This engine is on my garden tiller. I replaced the points, condenser & ... A: Jerry.. You are having a fuel starving problem as you have properly diagnosed. The engine will ... | |
| 20hp Honda engine kills after 20mins of running | 4/27/2009 |
| Q: I have a 20hp honda gx620 I. It is mounted in the back of a van to power a truck-mount carpet ... A: Lets look at the obvious here, is your oil level completely full. Your oil switch is very sensitive ... | |
| Bent Push Rods | 4/27/2009 |
| Q: Sir: I have a 5 year old Briggs 24hp Intek V-Twin. Starting last season, have bent both aluminum and ... A: John, give the folks in technical services a call at Atlantic Power. ... | |
| Ariens with a Tecumseh 7 hp engine | 4/27/2009 |
| Q: looks to have a series 1 or two carb on it the engine did not run, but I cleaned the carb and now it ... A: The float needs to be level. Make sure it is parallel to the carb body. I don't think that you ... | |
| Bent Push Rods | 4/27/2009 |
| Q: Sir: I have a 5 year old Briggs 24hp Intek V-Twin. Starting last season, have bent both aluminum and ... A: Let me guess this is on either a simplicity or an MTD right? This has been an intermittent ... | |
| Lawn Tractor won't start | 4/26/2009 |
| Q: My son was cutting the grass with our Scott S2546 lawn tractor and he went threw a large clump of ... A: Vincent, IT sounds like something may be lodged against the drive pulley preventing the engine to ... | |
| Huskey lawn mower | 4/26/2009 |
| Q: I have a huskey mower 18.5 hp 42" cut hydro when it get hot it I can't get it to go backwards and ... A: I don't understand what you mean when you are asking "How do I remove the plastic screw without ... | |
| 10 or 12 horsepower? | 4/26/2009 |
| Q: I asked another expert this question on the 22nd but have not gotten a reply. There is a link to go ... A: Based on the Spec number you gave me you are looking at a 10hp Kohler engine.It is a Model K241. ... | |
| yard machine lawn mower | 4/26/2009 |
| Q: I have a 17 horse techmsuh on a yard machine lawn mower that when i turn the key over and go to ... A: Mike, You have not told me if the engine is an OHV (Overhead Valve) if it is, you need to have ... | |
| Montomery wards riding lawnmower belt | 4/25/2009 |
| Q: I have a Montgomery wards Electric start Transaxle 10 HP model # TMO 33860A D230B. The cut is 38" I ... A: Ron: I need the MODEL TYPE and CODE number off the engine, not off the tractor. This number will ... | |
| Rx95 John Deere wont start just clicks | 4/25/2009 |
| Q: My RX95 just clicks at what I assume is a relay or voltage regulator. I can cross the starter and ... A: Sounds like you looked at most everything..except the starter key switch. Test your power output at ... | |
| Briggs and Stratton 18.5 twin "Loud knocking" | 4/25/2009 |
| Q: I have a riding lawn mower, with a Briggs and Stratton 18.5 twin cylinder. Model 42A707 Type 1238 01 ... A: Kevin: A loud knocking sound on this engine usually indicated a broken connecting rod. the engine ... | |
| engine starting and clutch release issues | 4/25/2009 |
| Q: I have a craftsman garden tractor 917.273022. This mower is about 9 years old( parents gave it to ... A: Anthony, No fire indicates only one thing, NO SPARK there is a black wire on your engine that is ... | |
| Engine won't run unless chocked | 4/24/2009 |
| Q: I have a Briggs 42a707 that won't run smooth unless 1/2 to 3/4 choked. Less than that runs very ... A: Ron, There are one of two things going on here.... Either the carb, fuel line or fuel filter has a ... | |
| Montomery wards riding lawnmower belt | 4/24/2009 |
| Q: I have a Montgomery wards Electric start Transaxle 10 HP model # TMO 33860A D230B. The cut is 38" I ... A: Ron.... If memory serves me correctly this is a Murray tractor that was private labeled for ... | |
| Briggs and Stratton re-build | 4/24/2009 |
| Q: David, thanks for taking my question. I am about to undertake my first motor overhaul since high ... A: I dont think your model number is right, please re check it. Get an actual Genuine Briggs and ... | |
| Tecumseh carb rebuild kit | 4/23/2009 |
| Q: There are many sites that sell rebuild kits - with all kinds of kit numbers. Can you tell me what ... A: If i was doing this i would replace the complete carb assy. Part Number 640272A Approx 70.USD ... | |
| Craftsman riding mower engine stops when blades are engaged | 4/23/2009 |
| Q: I have a Craftsman 'Garden Tractor', model number: 917.273070. It has a Kohler engine (model number: ... A: I think you are on the right track with an interlock system malfunction. Disconnect the ground wire ... | |
| Woodruff key keeps shearing | 4/23/2009 |
| Q: I have a 3.5hp Briggs and Stratton edger that keeps shearing the woodruff key upon starting. The ... A: Hmmmm im scratching my head here... it needs to be an ALUMINUM key. If your tourqueing the ... | |
| 5.5 hp carburetor rebuild | 4/22/2009 |
| Q: instructions how to rebuild carburetor 5.5 hp Briggs & straton roto tiller A: I am assuming that the carb sits on top of the tank. There is not really much to this, simply ... | |
| New Lifan 168F-2 hunting | 4/22/2009 |
| Q: I have a new Lifan 168F-2 electric start motor which I have installed on a piece of farm machinery. ... A: I believe your talking about the little black barrel connecter. It is nothing more then a fancy ... | |
| 18 hp Briggs and Stratton Wiring | 4/22/2009 |
| Q: I'm trying to find a wiring diagram for my 18 hp Briggs and Stratton engine. Model 422447 Type ... A: You will find all information pertaining to your engine here. ... | |
| Chainsaw Chain came off | 4/21/2009 |
| Q: I just started using a chainsaw, and did not notice that the chain was loose. The chain come off ... A: What happened is you "burred" or pinched the drive link. You can try loosening it with a pliers it ... | |
| craftsman riding lawn mower | 4/21/2009 |
| Q: craftsman 16.5 hp electric start 42" mower, 6 speed transaxle lawn tractor (model #944.605320). ... A: Do you have fresh fuel? Take a remote fuel tank and get fuel from that tank. lets rule out fuel ... | |
| 28n707 15.5 hp briggs and stratton | 4/20/2009 |
| Q: The engine sseems to run well but will accassionally back fire usually turn it off,but mostly when ... A: If it is not maintaining its rpm under load its because the governor is not working properly. ... | |
| john deer 285 | 4/20/2009 |
| Q: The cylender on the right side is firing and the mower will run. The coil on the left side has ... A: Yes...I have an idea.... AND your not gonna like it....IT sounds like you have a broken connecting ... | |
| mtd lawn tractor | 4/20/2009 |
| Q: I have an mtd model 13ah762f752 with a briggs 219707-0189-e1. The thing runs great and drives but ... A: Is it smoking? Could be a blown head gasket? There is a black wire near where the throttle cable ... | |
| Craftsman not charging,negative charge with electric pulley clutch engaged | 4/20/2009 |
| Q: Craftsman 23.0 HP,6 speed,50" Garden tractor, Model No.917.275031, Kohler Model No. CV674-75544 At ... A: Jim, This one is a doozy, I love challenges! and I would love to be there personally to solve it ... | |
| GX160, 5.5hp, Honda | 4/19/2009 |
| Q: Subject Honda GX160, 5.5 hp,w/CAT Pump Question The engine is on a pressure washer. The engine ... A: there is still an obstruction somewhere in the carb... I suggest replacing the carb with a new one. ... | |
| husky20hp rider no spark | 4/19/2009 |
| Q: I just put a new starter,solinoid,coil on.I ran it for the day on and off,ran great. I went to start ... A: Yes a Coil can be tested. But very few places are equipped to test a coil Lets isolate the safety ... | |
| flooding carburator | 4/19/2009 |
| Q: I have a 15Hp, B&S vertical shaft engine on a Scott's riding mower (Murray made). The model is ... A: Your not gonna like this answer.... Replace the complete carb assy. and make sure you have no dirt ... | |
| New Lifan 168F-2 hunting | 4/19/2009 |
| Q: I have a new Lifan 168F-2 electric start motor which I have installed on a piece of farm machinery. ... A: IT could be one of two things, either a bad carb or a gov spring setting. I have seen this problem ... | |
| mtd lawn tractor | 4/19/2009 |
| Q: I have an mtd model 13ah762f752 with a briggs 219707-0189-e1. The thing runs great and drives but ... A: I am guessing you have an ignition switch that has a "bypass" position on it that allows you to mow ... | |
| Briggs 12.5 hp | 3/17/2009 |
| Q: mod 286707 type 0420 01. Engine won't start. gas collects in bottom of air filter housing but ... A: your having a problem getting fuel into the cylinder. You have proven this by spraying starting ... | |
| Honda pressure washer 6.5 GX 200 | 3/17/2009 |
| Q: David, I disconnected yellow wire as you suggested 3/9/09. No help! Motor ran and cut-off same way. ... A: Inside of the spark plug boot there is a slot that a screw driver fits into. Between high tension ... | |
| Carburetor | 3/16/2009 |
| Q: I have a YardKing Elite push mower and I discovered that my carburetor is frozen in rust. I left it ... A: The Engine model number is STAMPED into the blower housing. Near the spark plug OR there is a tag ... | |
| honda motor | 3/16/2009 |
| Q: ANSWER: Can you please get me the Model number off the Block of the engine and I will be able to ... A: Claudio: I have had a chance to review a picture of this engine-more specifically the CDI unit your ... | |
| JD L111 b&s engine valve adjustment | 3/15/2009 |
| Q: I have a John Deere L111. I am having trouble starting it. Since the battery was 3 years old I ... A: Please get me the ENGINE MODEL, TYPE and CODE,number...It is located on a tag on top of the engine ... | |
| Slow gasoline leak on a briggs and stratton | 3/15/2009 |
| Q: I have a slow gas leak on a B&S 11 hp (model 25217 type 515301 code 94071913) This motor is on a ... A: It sounds like gas is bypassing the inlet needle, this could be due to dirt in the inlet needle ... | |
| tecumteh 16.5hp craftsman OHV Gold motor | 3/15/2009 |
| Q: What can I do to stop flooding if I turn the fuel off it runs well till out of fuel A: Your getting flooding due to a carburetor problem. Perhaps its a heavy float-(broken float) or ... | |
| b&s 17 | 3/15/2009 |
| Q: I HAVE A 1 CYLINDER 17 HP VERTICAL B&S I/C (310707) I ORDERED A GASKET KIT BECAUSE I HAVE TO ... A: You got 5 gaskets because this is how you achieve the correct crankshaft endplay. You can stack the ... | |
| Kohler engine misfires when warm | 3/14/2009 |
| Q: I have a Troy-Bilt Horse with a 7hp Kohler engine Model K161T, Spec # 281271J, serial#10021536 circa ... A: I have to agree with the dealer. Have him install an inline ignition tester which will quickly ... | |
| Cold engine hard to start!!!!!!! | 3/14/2009 |
| Q: I am asking about a Briggs 18hp engine model #917.272751. battery and starter are good.When engine ... A: could you get me a little bit more information please and i can help you further. On the engine ... | |
| lawnmowers & lubeoil | 3/14/2009 |
| Q: I have an old lawnmower 55years old. It runs on leaded petrol. Now it has to run on unleded petrol. ... A: Using the term "petrol" would make me assume that you are not from the USA- am I correct? What your ... | |
| honda motor | 3/13/2009 |
| Q: ANSWER: Can you please get me the Model number off the Block of the engine and I will be able to ... A: Claudio Based on the information you gave me, This is a very OLD L head engine that dates back to ... | |
| Still can't find | 3/13/2009 |
| Q: I still can't get a match for this model 944364160 number but i have a number on the ... A: I can get you the engine manual... here is the link for it.. ... | |
| honda motor | 3/13/2009 |
| Q: hello i have an old honda generator the generator no longer works i want to put the honda motor in a ... A: Can you please get me the Model number off the Block of the engine and I will be able to help you. ... | |
| Still can't find | 3/13/2009 |
| Q: I still can't get a match for this model 944364160 number but i have a number on the ... A: Steph, I don't know what your looking for? I have attached a link to an illustrated parts list of ... | |
| kohler sv600 | 3/13/2009 |
| Q: i have a kohler sv600-0012 needing steps to installing a new governor kit ANSWER: Dave... Please ... A: Ah yes... the good old days... Kohler had a problem with the little tab on the camshaft breaking... ... | |
| Toro Mower Oil leak & Lt. rear wheel don't pull | 3/12/2009 |
| Q: Apparently Fish is out today so it asked I refer to another expert. The Toro Model # is 20017 and it ... A: I got a chance to look at my personal pace today, If you remove your rear wheels you will find a ... | |
| replacement engine | 3/12/2009 |
| Q: looking for a replacement engine for a craftsman model# 917.270810. The engine on it is a B&S 19.5 ... A: Jonathan: This is a tough one to replace without lots of modification. The engine you currently ... | |
| Honda mower HR215 starter rope/flywheel | 3/11/2009 |
| Q: The starter rope on my mower pulls and retracts OK but dosen't engage the engine for starting. A: The starter "pawls" are not engaging the flywheel. This may be just due to dirt. You can remove the ... | |
| Status of Tecumseh Engines | 3/11/2009 |
| Q: I am looking at purchasing a new snow thrower and have noticed a lot of manufacturers utilize ... A: Thom: The rumor is correct, Tecumseh quit manufacturing engines December 0f 2008. Their service ... | |
| Kandi 150cc Doesn't Fire | 3/11/2009 |
| Q: We just bought the kids a Kandi go-kart with the 150cc engine. Before it even used its second tank ... A: John, When you say, doesn't fire-does this mean non spark at the spark plug or does this mean it ... | |
| troy-bilt gxt 2446 riding mower --- electrical | 3/11/2009 |
| Q: turned off mower - went in house - came back out - mower wouldn't turn over - broke ignition switch ... A: Mike: Your tractor is made by MTD. Get your model and serial number from under the seat and go to ... | |
| John Deere - STX38 | 3/10/2009 |
| Q: I have a J.D. STX38 Lawn Tracker older model -1992 +/- with a 17 horse Koler. I've been having ... A: You have an electrical problem of sorts, it could be as simple as a burnt out fuse or one of the ... | |
| Ground wire on coil? | 3/10/2009 |
| Q: I have a B&S 12.5hp riding mower & if I remove the ground wire from the coil I will get spark & the ... A: You are correct. It will not affect anything except you wont be able to turn your engine off with ... | |
| panther clutch repair | 3/10/2009 |
| Q: how do you check/change belt ANSWER: I am afraid I need more information. What is a panther? Is ... A: AHHHH yes.... taking me back a few years...I remember the Panther....how could one forget the ... | |
| coils burnt-out | 3/10/2009 |
| Q: i have been given a task of repairing a Honda gx620 20hp which is powereing a generator. I can ... A: Kevin, It is highly unlikely that BOTH coils have burnt out. Lets isolate this a little bit ... | |
| 6hp Briggs & Straton engine | 3/9/2009 |
| Q: I an having a problem starting my lawnmower, when I try to start it I smell gas. I was told my float ... A: Please get me the MODEL TYPE AND CODE numbers off the engine and I can walk you through this. The ... | |
| Yardman/MTD Leaf blower | 3/9/2009 |
| Q: My Yardman (MDT) leaf blower will not start. There is no spark. High tension lead looks ok. What ... A: John, A couple of things to check.... Make sure you have a GOOD spark plug, perhaps its just a plug ... | |
| GX 200 Honda 6.5 electronic ignition Pressure washer | 3/9/2009 |
| Q: GX 200 Honda 6.5 electronic ignition Pressure washer. David, My pressure washer starts right up and ... A: Mark, If your looking at the engine with the RECOIL facing you, on the lower Right hand side of the ... | |
| tecumseh tl 40 rotavator series 01-2003 | 3/8/2009 |
| Q: Starts OK will tick over No response when opening the throttle Will rev if lever on side of block is ... A: I think you are experiencing carb and or governor linkage problems. I should have been specific and ... | |
| 6hp Briggs & Straton engine | 3/8/2009 |
| Q: I an having a problem starting my lawnmower, when I try to start it I smell gas. I was told my float ... A: Without any more information all I can suggest is that you make sure you have FRESH gas from the ... | |
| honda gx160 | 3/8/2009 |
| Q: we use these motors on all our machines. we are a small parking lot painting co. it seems like some ... A: Joe: Sure they could lose compression, but that should not really cause them to bog down when ... | |
| LT 150 | 3/7/2009 |
| Q: I have a 15 hp ohc mod cv155 that seems to lose prim on the fuel pump. when this happens i have to ... A: I am assuming you are referring to a HUSQVARNA LT150, with a KOHLER engine am i correct? it sounds ... | |
| 17HP Briggs Straton engine | 3/7/2009 |
| Q: when i try to crank my riding mower it only turns over once and quits and it does it all the time ... A: Steve: I assume what your saying is you go to crank your tractor with the electric starter and it ... | |
| need a new engine please | 3/7/2009 |
| Q: I am looking for a horizontal engine 8 hp or greater, It's for a mini bike and the measurement is ... A: Tim: Have you tried ebay under the category- gasoline engines? Does it have to be 8 hp and above? ... | |
| Oil Leak on Briggs | 3/6/2009 |
| Q: I have a Craftsman model 917.271841 with a Briggs 21hp model 461707, type 0147E1, code 002185B ... A: I dont know of any online info, but the links below will help you! ... | |
| Toro snowthrower dies on 1/2 tank of gas | 3/6/2009 |
| Q: I have a 1987 Toro CCR2000 snowthrower with a Suzuki 4.5 hp 2 cycle engine. I replaced the needle ... A: okay...lets rule out the coil for now. a fuel tank not venting properly can give you the condition ... | |
| Oil Leak on Briggs | 3/6/2009 |
| Q: I have a Craftsman model 917.271841 with a Briggs 21hp model 461707, type 0147E1, code 002185B ... A: Well since the engine is nearly 9 years old its possible you have a gasket leak or perhaps even a ... | |
| Toro snowthrower dies on 1/2 tank of gas | 3/6/2009 |
| Q: I have a 1987 Toro CCR2000 snowthrower with a Suzuki 4.5 hp 2 cycle engine. I replaced the needle ... A: When the engine dies, how long do you leave it before you refill it with fuel? Perhaps your Coil is ... | |
| murray rider w/ 15.5 briggs | 3/5/2009 |
| Q: I have a Murray rider that will run if you straight wire the electric choke and unplug the 4 wire ... A: You also have an interlock for the clutch/brake,and a transmission neutral Check these switches ... | |
| air flow screws | 3/5/2009 |
| Q: hi i have a poulpan 2000 33cm what is the correct setting for the high and low air flow screws A: Frank: You can start by turning them both out 1 1/2 turns. Fine tune your idle first then your ... | |
| riding mowers | 3/5/2009 |
| Q: I am in need of a used tractor, I currently have a simplicity regen (i loved it) but a freelance ... A: Yes you can repair it by just getting the outer case. However unless you are going to do the repair ... | |
| Toro Mower Oil leak | 3/5/2009 |
| Q: Apparently Fish is out today so it asked I refer to another expert. The Toro Model # is 20017 and it ... A: It is very easy to change this gasket yourself. I would also replace the oil seal while you are at ... | |
| Tecumseh Engine will not start | 3/5/2009 |
| Q: My neighbor gave me his 1995 Murray lawn mower #217777X99D, with a Tecumseh VLV series 5.5 HP rotary ... A: Look under "engines gasoline" in your yellow pages. Any dealer that repairs air cooled engines will ... | |
| honda gx 670 v twin | 3/4/2009 |
| Q: I have been using a Honda GX 670 V twin to power a pressure washer (factory built unit). Over the ... A: Okay..... first make sure that the engine if full of oil. bring it up to the proper level. Now try ... | |
| help with my snowmobile | 3/4/2009 |
| Q: I have a 1995 Yamaha VMAX600. It seems to me that it is flooded. i have chaged the spark plugs 4 ... A: snowmobiles are a lil out of my league as i am a lawn and garden guy, but it sounds like you are ... | |
| GX75 John Deere Mower | 3/4/2009 |
| Q: David: Well here's what I've done tonight on the Kawasaki 9HP fc 290V. I removed the valve cover to ... A: You should be able to remove the valve springs without any special tools. Check the Valve stems for ... | |
| hi its me again with the champion | 3/4/2009 |
| Q: the website said I asked to meny questions. I will contact the champion plant. But just to confirm ... A: Derek: the screw that you are referring to is the Pilot Screw. To adjust this properly, With the ... | |
| 17.5 hp Kohler | 3/3/2009 |
| Q: I wish I would have looked up my strange problem, to discover it is a common problem prior to ... A: Nope you did nothing wrong. Of course you have learned the hard way about "hydro locking" or ... | |
| Briggs&stratton-8HP 319cc vertical shaft | 3/3/2009 |
| Q: Briggs&Stratton Model;191707 Type;1144-01 Code;79061209 This engine hunts and will only run at full ... A: Ross: It sounds like you may have a partially sheared timing key. Remove the flywheel and take a ... | |
| I am not getting any spark on a K301 Kohler | 3/2/2009 |
| Q: I am not getting any spark on a K301 Kohler. Spec 47606. I have put in new points, plug, push rod, ... A: Roger I cant remember exactly, give me some time and ill find a book and get you the answer. The ... | |
| Lawn Mower starts w/ prime then shuts off | 3/2/2009 |
| Q: I have a Weedeater 22" lawn mower-recently purchased. If I prime the engine it starts immediately ... A: The Gas valve is the shut off valve, it turns the fuel on and off to the carburetor. Even though ... | |
| cant get carb to work right | 3/2/2009 |
| Q: I was wondering if you could tell me the rough adjustment for the screw it is in the back of the ... A: Derek, Please tell me what Horsepower this engine is. Get me a compression reading on the engine. ... | |
| Craftsman Lawn Tractor- transaxle | 3/2/2009 |
| Q: Model 917 272670, SR# 032103B006377 TransAxle Dana 4360-140 This tractor was being rolled up into a ... A: I agree with you, I am speculating that the shift forks may be bent or the reverse idler gear is ... | |
| lawn mower engine dies after running a few minutes | 3/1/2009 |
| Q: Recently my lawn mower started having this problem, After running a few minutes, the engine dies. ... A: Try to loosen your gas cap and see if the problem goes away. IF so you have a bad fuel cap and your ... | |
| I am not getting any spark on a K301 Kohler | 3/1/2009 |
| Q: I am not getting any spark on a K301 Kohler. Spec 47606. I have put in new points, plug, push rod, ... A: First off, Make sure the point are closing completely and making a good contact. Run a piece of ... | |
| tecumseh 5.5hp eng probem | 3/1/2009 |
| Q: my moms snow blower only run in full choke. the snow blower is 3yr old this winter (with only may be ... A: The engine is starving for fuel. That is why it runs on choke. I am assuming you left old gas in ... | |
| HS-45 STIHL Hedge Trimmer | 3/1/2009 |
| Q: What is the correct setting for the C1Q-S54 Carb? I've worked on carbs with high/low jets and idle ... A: Unfortunately you have a fixed jet carb. IT is set at the factory. The only service you can really ... | |
| power washer | 3/1/2009 |
| Q: i have a honda gc160 5.0 hp power washer that i bought used the problem is when it's running when i ... A: I will give you a step by step instruction on how to test your pressure washer. Step 1: Without ... | |
| Tecumseh Engine will not start | 2/28/2009 |
| Q: My neighbor gave me his 1995 Murray lawn mower #217777X99D, with a Tecumseh VLV series 5.5 HP rotary ... A: It sounds like you need to either replace or have the carb serviced. Its cheaper to replace the ... | |
| Lawn Mower starts w/ prime then shuts off | 2/28/2009 |
| Q: I have a Weedeater 22" lawn mower-recently purchased. If I prime the engine it starts immediately ... A: Is your gas valve turned on? It sounds like you need to either replace or have the carb serviced. ... | |
| control-starter spring | 2/28/2009 |
| Q: I HAVE A HONDA DXV530 EXA2 MOWER ENGINE, AND I NEED TO KNOW HOW TO FASTEN THE STARTER SPRING IN THE ... A: Michael, I am thinking you are referring to a GVX530 NOT DVX530 correct? Either way I am sorry to ... | |
| Electrical print | 2/28/2009 |
| Q: Scotts S1642 manufactured by John Deer MODEL: CV16S SPEC NO: 43526 SERIAL NO: 3024903403 KOHLER ... A: Vincent, A quick goggle of Scotts S1642 takes me to the John Deere website that has the owners ... | |
| Briggs & Stratton - No Spark | 2/27/2009 |
| Q: I have a small Briggs & Stratton engine on an old Snapper push lawn mower that I am trying to get ... A: Either clean or replace the points/condenser. make sure your gap is set to .020 in and that the ... | |
| not charging | 2/27/2009 |
| Q: i have a16 hp onan gas motor on a lincon welder can't find any model number on the motor the ... A: Morris, I personally don't know the model or vintage of the engine either. Most of the engines ... | |
| transmission problem | 2/27/2009 |
| Q: Model # 917.271634 I t will not move in any gear. It just bucks and sort of moves just a couple of ... A: The symptoms you are describing to me sound like a broken gear inside of the transmission unless you ... | |
| gear oil for transaxle in a craftsman lawn tractor | 2/27/2009 |
| Q: I'm needing to know how much gear oil 80W90 do I use for a peerless transaxle (model number ... A: Jackie, I know that 80W90 is correct, how much though, I am afraid that i dont have that answer, ... | |
| craftman mower 6.5 | 2/27/2009 |
| Q: craftman 6.5 mower is spilling oil out of it whar would cause this? A: Tammy: Where is the oil "spilling" from? IS the oil cap securely attached? Sometimes if you ... | |
| 21 hp B@G Intek model 407777 type0121E4 | 2/26/2009 |
| Q: I have to add 8 ounces of oil to the engine whenever I get ready to use it. There are no visible ... A: What viscosity of oil are you using. Use SAE 30. 10w30 is an acceptable substitute, I dont ... | |
| hondaeg5000 genarator | 2/26/2009 |
| Q: wont run with choke open only runs slow when I manually push rod A: It sounds like there was old fuel left in the carb and it has varnished the main nozzle restricting ... | |
| Dixon 4515B ZTR (believe to be 1999/2000 | 2/26/2009 |
| Q: Mower okay in forward , it does not back up very fast or without pulling to one side. One side ... A: Larry: It sounds like the "TRACKING" is out of adjustment. The Dixons operate on two independent ... | |
| snowblower | 2/26/2009 |
| Q: I have a 5 yr old white outdoor snowblower .. has a 30" cut with a 10.5 hp tecumseh engine.... my ... A: I would NOT attempt this. I understand the need and reasoning to want to do this, but the welds on ... | |
| GX75 John Deere Mower | 2/26/2009 |
| Q: David: Well here's what I've done tonight on the Kawasaki 9HP fc 290V. I removed the valve cover to ... A: Roger, Remove the Cylinder head as an assembly first. Once the Cylinder head is removed the rocker ... | |
| Follow up on Honda GX120 | 2/25/2009 |
| Q: Thank you Glenn A: Glenn: The erratic engine running you are speaking of is called hunting and surging. We need to ... | |
| Valve Clearences | 2/25/2009 |
| Q: what the valve clearences for Honda GX 160 are.I also wanted to know how to take off the crankcase ... A: John, I had some time to do a little more research on this for you. I have narrowed down the ... | |
| GX75 John Deere Mower | 2/25/2009 |
| Q: David: Well here's what I've done tonight on the Kawasaki 9HP fc 290V. I removed the valve cover to ... A: The valve is held on with a single screw and you may need to remove the rocker arm to get to it. ... | |
| Echo Model SRM 200DB | 2/25/2009 |
| Q: This is an older model and I am trying to find a used cylinder head for the engine. OEM site says ... A: Tom: I am sorry, but I don't have any magic Echo source here, I would start looking for large Echo ... | |
| Lawnboy runs very slow | 2/24/2009 |
| Q: I have a Lawnboy model 10515 that was given to me. It is in very good shape and starts well, but ... A: Remove the muffler and see if the ports are plugged. There should be 3 holes and you should be able ... | |
| yard works snowblower | 2/24/2009 |
| Q: while bloing sno it just bstopped electric start won,t work and the pull cord won,t pull to s tart ... A: It sounds like the engine has seized up due to lubrication. If you can not turn the engine over ... | |
| John Deere DX75 | 2/24/2009 |
| Q: Dave: Had to ask a "new question" it said I had too many questions. Haha Here's where we left off. I ... A: Hey Roger... Yes the O ring gaskets will be under the fill check tube, and maybe even were the tube ... | |
| John Deere DX75 | 2/24/2009 |
| Q: Dave: Had to ask a "new question" it said I had too many questions. Haha Here's where we left off. I ... A: That is really good compression. When you said it smoked, how long has it smoked? Have you ran it ... | |
| Liquid Combustion Technologies | 2/23/2009 |
| Q: I work at a Sears store and last year we introduced a front tine tiller with a mystery engine on it. ... A: I have a lot of experience with this company, I have their telephone number in my cell phone.. Out ... | |
| finding owner's manual | 2/23/2009 |
| Q: I bought a second-hand but little used Lifan portable generator sold under the American Camper ... A: Cleon, Lifan... Good Stuff...just had a phone conversation with them earlier today.... Please ... | |
| GX75 John Deere Mower | 2/23/2009 |
| Q: On a John Deere GX75 rear engine riding mower. Is there something I can do about the engine that ... A: Roger, It will take more air pressure then 20-30 psi. I would strongly suggest unless you have a ... | |
| GX75 John Deere Mower | 2/23/2009 |
| Q: On a John Deere GX75 rear engine riding mower. Is there something I can do about the engine that ... A: Alrighty then... You may not be able to diagnose this without proper tools, but I will give you a ... | |
| Honda HS35 won't shut off, follow-up | 2/22/2009 |
| Q: All wires are hooked up. Now that you mention it, when I got the used CDI unit, I was wondering why ... A: No problem...no need to apologize, I am thinking that the Black wire was used as the kill switch as ... | |
| Mclane edger motor | 2/22/2009 |
| Q: I have this older mclane edger that has a briggs and stratton motor on it. I do not have the ... A: Here is a copy of the parts manual I believe you have a Model 60100, if its not a 60100 the only ... | |
| GX75 John Deere Mower | 2/22/2009 |
| Q: On a John Deere GX75 rear engine riding mower. Is there something I can do about the engine that ... A: Hey Roger... IS the smoke, Black/Blue or white? Is the engine over filled with Oil? Is the air ... | |
| Honda HS35 won't shut off | 2/22/2009 |
| Q: I recently acquired a Honda HS35 snowblower. It had a bad CDI unit. After replacing the CDI unit ... A: I think in the process of replacing the CDI unit you may have forgot to hook up a ground wire or a ... | |
| Troubleshooting battery charging circuit, Kohler CV490S | 2/21/2009 |
| Q: This engine is mounted on a Craftsman LT1000 riding lawn mower. Decals show Kohler Pro 17OHV, Model ... A: Lonny: I don't have any manuals here to give you the exact specs your seeking, but this engine did ... | |
| Lawn Mower starts w/ prime then shuts off | 2/21/2009 |
| Q: I have a Weedeater 22" lawn mower-recently purchased. If I prime the engine it starts immediately ... A: Andy, It sounds like you have stale fuel in your fuel system OR you have an obstruction in your ... | |
| Brigs 31d777 oil leak and belts slipping | 2/21/2009 |
| Q: I have a troy-bilt 1842 lawn tractor with a Briggs & Stratton 18hp I/C OHC engine (model 31D777, ... A: No the bearing should not be visible. Its very simple to replace the oil seal. You will need to ... | |
| Gocart Axle | 2/21/2009 |
| Q: How do you make a home made rear gocart axle? A: Michael: First you need to get a piece of solid steel the width you want your axle to be. then you ... | |
| Tecumseh LEV 90-120 engine | 2/21/2009 |
| Q: Toro rotary mower with Tecumseh 4-cycle engine. Engine starts great then quits in about 5-10 ... A: How fresh is the fuel you have in the tank? IS it fresh from the pump within the last two weeks? ... | |
| briggs and stratton w/ no spark | 2/20/2009 |
| Q: How do I see what is why I have no spark to my engine? The model # is 170432, code 77062111, type ... A: There are many reasons that you may not have spark,, Please tell me what kind of application this is ... | |
| Follow up on Craftsman | 2/20/2009 |
| Q: This is about the riding mower that wont go into gear, after the transmission was disengage all ... A: John: You did not do anything wrong. Sometimes belts come off for no apparent reason. Perhaps ... | |
| Pull cord won't rewind | 2/20/2009 |
| Q: When my son attempted to start our Craftsman mower, he pulled the cord as usual, but the mower ... A: You will need to remove the recoil blower housing assembly and replace the recoil assembly. There ... | |
| New 26HP DGS6600 does not start | 2/20/2009 |
| Q: Bought a 26HP Craftsman 917288600 DGS6600 garden tractor June 2008 with a snow thrower attachment. ... A: Electrical problems are extremely difficult to trouble shoot and sometimes it may take a tech a few ... | |
| Honda GX120 Spark Plug and Magneto | 2/19/2009 |
| Q: I recently purchased a Honda GX120 engine on a bluebird 530A walk-behind aerator, and it worked ... A: Place a business card between the magneto and the flywheel magnets. This will be "just about" ... | |
| Briggs & Stratton Points | 2/19/2009 |
| Q: I have a very old tiller that has a briggs engine on it and I can't get any spark. I currently have ... A: John: Replace the coil with a solid state module and this will take care of your problem. There ... | |
| Honda Engine | 2/19/2009 |
| Q: I have a honda GX120 that runs fine at half choke but if i turn choke off motor dies A: The engine is simply not getting enough fuel. When you put it to half choke you are compensating ... | |
| PoulanPro 295 chainsaw | 2/19/2009 |
| Q: I use my chainsaw around my residential property, so it is not in constant use. The kick back device ... A: I assume your are running your saw with the chain brake activated. Is it melting in a perfect circle ... | |
| Kawasaki Carb. issue | 2/19/2009 |
| Q: Kawasaki FB460V 4 cycle 12.5 hp engine for a 36" walk-behind commercial John Deere Mower. ... A: It sounds to me like you may have a slight obstruction in your main nozzle of the carb or the carb ... | |
| pocket bike | 2/19/2009 |
| Q: how do you put together a new piston and ring kit on a 47cc pocket bike A: I have never seen a pocket bike, but a piston is a piston is a piston...and so on... Carefully ... | |
| not getting gas to carburetor | 2/18/2009 |
| Q: i have an echo leaf blower model Pb200.i put a new diaphragm in the carburetor and replaced the fuel ... A: Lets check for all three things you need to make an engine run Ignition: Remove the spark plug BE ... | |
| Craftsman riding mower | 2/18/2009 |
| Q: I left the transmission disengaged over winter now it wont go into gear. I checked the belt and when ... A: John: The "squealing" you indicate sounds like a pulley that is not turning. Even though the pulley ... | |
| Craftsman riding mower | 2/17/2009 |
| Q: I left the transmission disengaged over winter now it wont go into gear. I checked the belt and when ... A: That is a hydrostatic transmission. Push the rod in all the way. Pull it in and out a few times. ... | |
| Parts for Generator | 2/16/2009 |
| Q: I have a UST 5500 generator and the spacer in front of the carbuator is broken.It is about 1/2 inch ... A: Charlie: A Honda Connecting block will fit on your engine. The part number is 16211-ZF6-D40 Honda ... | |
| Craftsman riding mower | 2/16/2009 |
| Q: I left the transmission disengaged over winter now it wont go into gear. I checked the belt and when ... A: John... Try moving the transmission lever back and forth a few times without the engine running. ... | |
| OVERHEATING | 2/16/2009 |
| Q: Have you ever heard a air cooled engine overheating due to keeping the same rpm or say speed for a ... A: Yes I have heard of air cooled engines overheating. I would like to say however that a "bike" ... | |
| Parts for Generator | 2/16/2009 |
| Q: I have a UST 5500 generator and the spacer in front of the carbuator is broken.It is about 1/2 inch ... A: .. I am attaching a picture as I think this is the part you are describing. It is called a ... | |
| Toro CCR 2400 1998 snow thrower | 2/16/2009 |
| Q: I own the above snowthrower built in 1998. I have to replace the starter rope for the recoil ... A: Rick: I'm going to have to go off of memory here, so forgive me if the details are not exact. Step ... | |
| MOWER WON'T START | 2/15/2009 |
| Q: I ORIGINALLY ASKED THIS QUESTION TO ERIC BUT HE WAS MAXED OUT AND TOLD ME TO SEND THE QUESTION TO ... A: Glen: I have no personal experience with the E3 spark plug nor have i heard of anyone that does ... | |
| timing marks | 2/14/2009 |
| Q: I HAVE A CRAFTSMAN 6.75HP LAWN MOWER. I AM HAVING TROUBLE FINDING THE TIMING MARKS ON MY LAWN MOWER ... A: . There is a dot on both the crankshaft and the camshaft. you need to align them for the engine to ... | |
| MOWER WON'T START | 2/13/2009 |
| Q: I ORIGINALLY ASKED THIS QUESTION TO ERIC BUT HE WAS MAXED OUT AND TOLD ME TO SEND THE QUESTION TO ... A: Hey Glen... Great to hear from you.. even if you drained the fuel from the tank, there may be ... | |
| MOWER WON'T START | 2/10/2009 |
| Q: I ORIGINALLY ASKED THIS QUESTION TO ERIC BUT HE WAS MAXED OUT AND TOLD ME TO SEND THE QUESTION TO ... A: .. When you say it wont crank..do you mean it wont start? Or the engine will not turn over? I am ... | |
| Daton 5hp tiller | 2/5/2009 |
| Q: i was give this tiller by a friend its a Dayton 5hp front tiller and i have been trying to find out ... A: Forgive the auto answer, I am new at answering. I THINK this may have been a private label tiller ... | |
| Honda surge | 2/5/2009 |
| Q: I have a Honda GXV530 EXA2 GJARM1011691 on a Craftsman rider. The engine surges at full throttle, ... A: Keith: Hunting and Surging is one of those problems that can drive us technicians crazy. ... | |
| POLARIS 400 SPORTSMAN 4X4 IDLE | 2/4/2009 |
| Q: I HAVE A 97 POLARIS 400 SPORTSMAN 4X4 I HAVE CLEANED THE CARB. 3 TIMES VERY THROUGHLY AND IT WILL ... A: First let me start off by saying I am a lawn and garden guru. I have always been a believer that if ... | |
| modification point to c.d.i. | 2/4/2009 |
| Q: how to modify from point system to c.d.i./ modual systemt thanks richard s africa. A: Richard: Please tell me what kind of engine you are trying to to convert from a point ignition. I ... | |
| sumec recoil assembly | 2/4/2009 |
| Q: sumec recoil assembly for a powermate 12hp modle PM0106001 where can I get this part do you know who ... A: Jerry: I don't know if you checked with Coleman, but the last known part number for that Recoil is ... | |
Small Engines (Lawn Mowers, etc.)
Answers by Expert:
David R -GlobalTek LLC
Top Expert on this page
Expertise
Small Air Cooled Engines and applications including Twin Cylinders. A specialist in the Chinese Engine-- i e LIFAN, LONCIN, ZONGSHEN, RATO, LCT, YAMAKOYO, DUCAR, GREYHOUND, (Honda Engine COPY) area. Have personally been to Chinese Engine factories several times Former Day to Day job is in application engineering of 4 cycle Engines. Evaulation, testing and failure diagnosis of Chinese Engines,Briggs and Stratton and Kohler engines daily. In other words I do this everyday.
Experience
30 Years in OPE industry. Briggs and Stratton Master Service Tech, Master Parts Pro. Former owner of OPE dealership servicing and selling Honda, MTD, Murray, Husqvarna, Toro, Lawnboy, Shindaiwa, Briggs and Stratton, Kohler, and Tecumseh. Previous job as trainer for engine manufacturer performing service training for companies like SEARS, HOME DEPOT, LOWES, TSC, etc. Instructor for Technical College.
Education/Credentials
Vo Tech Training 1981, Husqvarna Factory Training, Briggs and Stratton Factory Service School(s) Tecumseh Factory Training, Shindaiwa Factory Training, MTD, Hydrogear, Toro, Lawnboy update schools. To many to list in the past 30 years.
©2012 About.com, a part of The New York Times Company. All rights reserved.