You are here:

Steering Column Repair/1964 Chevelle tilt column rebuild

Advertisement


Jim C wrote at 2006-12-01 16:43:12
It appears you have not removed the housing from the tilt assembly. There is a special tool that is like a hose clamp to clamp around the housing and attaches to a slide hammer to remove the housing (press fit). Once removed, the screws that hold the tilt assembly together can be removed and the rest should easily be disassembled. Be careful when removing the springs as they are hefty.


Impala SS wrote at 2008-01-04 01:11:54
DR-2-63 is the same number as full size cars with tilt. The 64 Chevrolet passenger car has disassembly instructions. There are several special tools required to take one apart. I just took a 64 Impala apart. Without the special tools you won't have much luck.


john wrote at 2015-01-11 18:04:02
Duane, I am stuck where you were. What did you do next?

jociha@att.net    john


Steering Column Repair

All Answers


Answers by Expert:


Ask Experts

Volunteer


Jay Cooney

Expertise

I can answer any question about any GM steering column with my having over 30 years of GM experience. I will answer general questions on any other steering column manufactured by the major automakers. I will do what I can to help troubleshoot and repair a steering column.

Experience

I have over 30 years experience in auto repair. I have repaired or rebuilt thousands of vehicles. My expertise is general and mechanical (gas and diesel) troubleshooting along with a vast electrical background. I have accumulated an extensive library of repair manuals and have researched every car problem from AMC's to Z-71's.

©2016 About.com. All rights reserved.