You are here:

Tractor Repair/timing of a IH 444

Advertisement


STEVE HUTCHINS wrote at 2014-11-26 02:11:34
I WOULD PULL #3/2 INJECTER,PULL THE VALVE COVER/ WITH#3/OR #2 VALVES CLOSED,[SHOULD HAVE CLERANCE UNDER THE ROCKER ARM.At THIS TIME FILL THE CYLINDER UP WITH ARE FRAOM A RUBBER TIPPED BLOW GUN IN THE CLOSED VALVE CYLINDER,SOUNDS LIKE YOU HAVE A BLOWN HEAD GASKET BETWEEN #2/3 CYLINDER.WHILE PUTTING AIR IN THE CYLINDER WITH THE CLOSED VALVES ,PUT YOUR FINGER DOWN THE OTHER INJECTER HOLE,I BELIEVE YOU WILL FEEL AIR.THE HEAD GASGET HAS LET GO BETWEEN THE #2/3 CYLINDER,HAVE THE HEAD PLAINED /CHECK THE BLOCK ,MAKE SHURE ITS STILL FLAT


Tractor Repair

All Answers


Answers by Expert:


Ask Experts

Volunteer


Taylor

Expertise

I can answer most questions about tractor repair and implement repair. I have 35 years experience in ranching/farming, and have worked on a variety of tractors and implements, from light to heavy. I do all my own mechanical work.

Experience

I have been in the ranching/farming field for 35+ years and have used MANY different types of equipment

Education/Credentials
I have an M.Sc. in Physics.

©2016 About.com. All rights reserved.