Experience Dealership line mechanic on MG, Triumph, Jaguar for 15 years, Instructor in commercial mechanics school 2 yr. Product information manager for piston and valve manufacture, Instructor & hotline answer man for import car parts importer 15 yrs.
Organizations Associate member SAE
EAA member
Publications Import Car magazine
Education/Credentials ASE Master Auto with L-1 certification up to 2000
Question I have a 1969 MG Midget with a Crane electrical ignition taking the place of the original point and condenser. The engine is all original except for a new distributor and twin S.U. carbs. The engine accelerates fine up to 4500-5000 rpm's. At this point there appears to be a high speed miss which can be heard from the tailpipe. It sounds like a very rapid muffled popping sound. I've adjusted fuel mixture and timing and can't seem to eliminate the problem. Also, upon deceleration from high speed I get backfiring from the tailpipe. I attached a vacuum gauge which indicates I have worn valve guides. Could worn valve guides account for either of my problems. If not, do you have any other suggestions. Thanks so much for any help you may be able to provide.
Keith
Answer Hi Keith,
I have not seen worn guides do that. First look closely at the exhaust system as a leak anywhere forward of the muffler and more likely up front will cause that.
If nothing is found there I would do a compression test and examine the lift of every valve for a worn cam lobe. Next examine the plugs for signs of a misfiring cylinder. Check the ignition timing and advance system and if nothing is found you should put it on a scope to examine the new ignition system.
Let me know,
Howard
