You are here:

Truck Repair/EATON 12 SPEED GEARBOX

Advertisement


Question
HOW DO YOU PULL THE BACK OF THE EATON 12 SPEED GEAR BOX?

HOW DO YOU DISASSEMBLE THE EATON 12 SPEED GEARBOX?

Answer
You have to remove the top cover. then remove all the bolts on the auxillary section of the trans that that will then separate might have to use a pry bar to wiggle it loose theres 2 guide pins that help hold it in place.  To disassemble the rest of it: remove your bell housing then pry your input shaft off. then there will be 2 covers on the front that needs removed to gain access to your countershafts. Remove the shafts with the gears that leaves you with a empty case.

Truck Repair

All Answers


Ask Experts

Volunteer


Jeff Drumm

Expertise

I Can answer any question pertaining to semi trucks and trailers. Have no experience in the automotive field so not able to help in that area.

Experience

My experiences in Semi Trucks is. I own my own truck and i presntly maintain a 80 truck fleet. Can handle any questions pertaining to a truck have tore apart and rebuilt every aspect on them. Fleet I deal with is Mainly Volvo trucks and a handful of freightliners. Work on automated transmissions on a daily basis along with carrier apu's. With engines my specialty is the 60 series Detroit but do work on the cummins isx the n-14 and the ism. and also the Volvo engines.

Education/Credentials
Have a College Degree from university of northwestern ohio in diesel and agriculture mechanics. Have 10 years behind the wheel driving a truck and 4 years working on trucks full time. Also have grown up on a farm so have been tinkering on trucks and tractors all my life.

Awards and Honors
I've gone through online schooling and have received certificates from webb wheel, Timken and Volvo academy.

©2016 About.com. All rights reserved.