AllExperts > Experts 
Search      

Volkswagen Repair

Volunteer
Answers to thousands of questions
 Home · More Questions · Answer Library  · Encyclopedia ·
More Volkswagen Repair Answers
Question Library

Ask a question about Volkswagen Repair
Volunteer
Experts of the Month
Expert Login

Awards

About Us
Tell friends
Link to Us
Disclaimer

 
 
 
 
About Rocky Racoon
Expertise
Most questions that relate to interior, and exterior equipment removal, and re-installation. Also, mechanical repairs of the engine, and the axles, and the brakes.

Experience
35 years auto repair experience. 3 years specifically Volkswagen. 10 years ago, graduated from general technical college. Deans list graduate. One of several hundred, out of several thousand to compete, and win recognition within Volkswagen for knowledge, and excellence.
 
   

You are here:  Experts > Home/Garden > Auto Repair > Volkswagen Repair > 98 cabrio gls

Topic: Volkswagen Repair



Expert: Rocky Racoon
Date: 10/31/2007
Subject: 98 cabrio gls

Question
I have a cabrio gls 98.  It has 110,000 on it.  Everything runs perfect except when at idle AS SOON as the a/c is TURNED ON it starts to idle rough.  Without the a/c on its rpms are a constant 900-1000.  When the a/c is turned on the rpms rev between 400-800 almost stalling I think. I checked under the hood for anything obvious.  There is an oil leak that appears to be coming from a head gasket.  That is the only thing I noticed.  There is fresh oil coming from the gasket area and from the looks of the oil build up it seems to have been leaking for a few months.  Could this be related to the idle?

Answer
Hi Amber;
Load on the engine increases, and rpm's drop when a/c is on.  It shouldn't be the kind of load you describe though.  I would recommend that the charge in the a/c system be checked right away.  A recharge is indicated, and reasonably cheap.  If it's the a/c compressor...look out!  The compressor is expensive, and if it let's go, it usually affects everything in the a/c system requiring a high pressure flush with nitrogen gas.  The oil is seeping from the valve cover gasket I expect, and is fairly expensive, but can be successfully repaired in about an hour, and a half.  The intake plenum gasket has to be changed at the same time.  Ask that the engine be steam cleaned after, so it can be demonstrated as to the effectiveness of the repair.

Good luck, Amber.  Hope this helps some.

Add to this Answer    Ask a Question



  Rate this Answer
   Was this answer helpful?
Not at allDefinitely              
   12345  

     
About Us | Advertise on This Site | User Agreement | Privacy Policy | Help
Copyright  © 2008 About, Inc. About and About.com are registered trademarks of About, Inc. The About logo is a trademark of About, Inc. All rights reserved.